Trying to install library upgraded 1.0

recently bought a new mac book pro. my emac was so old that in order to use iphoto 11 i was instructed to download the library upgrader 1.0. have tried and failed numerous times this evening either using safari (just says it can't find the server) and firefox which says try changing the folder properties ? any ideas anyone?
thanks
Anne

Do you have any libraries created with iPhoto 5 or earlier? This if from the updater's page:
This tool prepares libraries from iPhoto 5 or earlier so they can be upgraded with the current version of iPhoto.
If you don't have any iPhoto 5 or earlier libraries you don't need to run it.
OT

Similar Messages

  • Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

    Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

    Thanks b noir,
    I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

  • Trying to install an upgrade but Error 7 is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc.  Help

    Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times  These are my warnings
    "Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services."  [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "

    If the above steps haven't helped try installing:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    as appropriate.
    tt2

  • I have tried to install the upgrade to iTunes on my Windows XP system. It tells me that I have an older version of Bonjour on my system and that it can not remove it. I have also tried to uninstall what is on my system and it will not uninstall! Help?

    I have an older version of iTunes on my system. I have tried to install the upgrade and it talls me that I have an older version of Bonjour and that it can not remove it. I have also tried to uninstall what is on my system and it will not do it. Help?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

  • ITunes fails to load.  Message is Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services. Never had this problem before trying to install this upgrade

    iTunes fails to load.  Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?

    Dave, same problem here.  And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service.  It seems there is a bug with the newest update, period.  All of the normal "easy" steps don't work.  Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
    But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again.  This has worked for several people (I read the thread before posting).  Win 7 64bit.  It just seems that Apple did not thoroughly test this new version.   Period.
    If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on.  Total memory hog, even with 16G RAM and dual quad core processors.  It has to learn to play nice with others.
    After the scan and I'm sure an hour or two of work...I'll re-post. 
    Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right.  Depending on the size of your drive, this could take hours.  It is a matter of choice, of course.

  • Trying to install new upgrade to my iphone4 and it put my phone in recovery mode.  How do I get it out?

    Trying to install new upgrade to my iphone 4 and it put the phone in recovery mode.  How do I get it out?

    i have this problem too! have you fixed yours yet?

  • I tried to install IOS upgrade from itunes. suddenly my PC got shut down.

    I tried to install IOS upgrade from itunes. suddenly my PC got shut down.
    NOW IPHONE is stuck. doesnt re-start, just shows a picture asking to connect usb-itunes connection.
    and my PC ITUNES doesnt identify my device at all.

    Google "iPhone DFU mode".

  • I currently have itunes11.0 Trying to install the upgrade to 11.1 (windows Vista) but systems says there is an error. I keep trying but get the same message

    I am trying to install itunes 11.1 but system says error occured run installer again...when I do I get the same thing again. Help

    See if this helps you. <br />
    https://support.mozilla.com/en-US/kb/unable+to+install+add-ons#Download_Error_228

  • Brand new laptop, tried to install Ram upgrade and computer won't turn on (no bios, nothing)

    I got my new qosmio x70 yesterday with a ram chip I ordered online. When I install the chip into either ram slot, the computer won't boot. It won't even turn on. 
    When I click the power button, the light aournd the button turns on for a moment then off again. That's it.
    I thought maybe I could make a bios change, but there are NO memory options in bios. I also tried both ram chips from my old Qosmio (3 years old) and they had the same problem. Any ram that touches my machine disables it. Am I going to have to send back my brand new toy already!? 
    Solved!
    Go to Solution.

    Qosmio X70-ABT3G22 part # PSPLTU-0E2069
    Your support page is here - http://support.toshiba.com/support/modelHome?freeT​ext=1200007040
    Toshiba's memory just enter your part number PSPLTU-0E2069 see here- http://www.toshiba.com/us/laptops/memory-finder
    Here is what Crucial recommends - http://www.crucial.com/store/listparts.aspx?model=​Qosmio%20X70-ABT3G22&Cat=RAM      -click on all compatible ram to see all available ram single and pairs.-
    I have used Crucial to order in the past because they guarantee compatibility and you should not have any issues with ordering from Toshiba either. The memory you posted may work, looks like the same specs but I don't want to be the one to tell you it will work incase you have trouble with that one.
    Here are memory spec terms from the crucial site to help understand what they mean.
    Memory spec terms
    If you're not sure if a module is right for your system, use the Crucial Memory Advisor tool for a list of guaranteed compatible modules.
    NON-ECC/Non-parity— Most desktop and laptop computers take NON-ECC or Non-parity memory.
    ECC/Parity— ECC or parity modules look for errors in data and are most often found in servers and other mission-critical applications used by large networks and businesses.
    Unbuffered— Most PCs and workstations use unbuffered memory which is faster than registered memory.
    Registered/Buffered— Registered or buffered modules delay all information transferred to the module by one clock cycle. This type of memory is primarily used in servers.
    Fully buffered— Designed for next-generation servers, features an advanced memory buffer. 
    CL— CAS (column address strobe) latency, which is the number of clock cycles it takes before data starts to flow after a command is received. Lower CL is faster. Modules with different CL can be mixed on a system, but the system will only run at the highest (slowest) CL.
    Component configuration— (For example: 64Meg x 64) Indicates the size of the memory chip components on the module.
    Voltage — For example 2.6V. Indicates the power used by the module. The lower the better
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Trying to install upgrade of PSE 13,  Installer failed to initialize. :-/

    I'm trying to install the upgrade after purchasing it for the Photoshop Elements 13. I get the 7z icon, open it go to PSE13 then SEt up and run it.  Then I get a message saying "We've encountered the following issues.  Installer failed to initialize. This could be due to a missing file.  Please download Adobe Support Advisor to detect the problem. " Then I'm directed to a troubleshooting page that really has me going around in circles... What do I do??
    Should I uninstall the version I currently have and try installing PSE 13 using the key code??
    I've been trying to set this up for about 2 hours now and feel like I'm just going around in circles.  Please help. 

    Angela_castro_p I would recommend reviewing your installation log files to determine why the installer is failing to initialize.  Most likely you will want to review the PDApp.log in this situation as it should contain the error preventing initialization.  For information on how to locate and interpret your installation log files please see Troubleshoot install using logs | Elements.  You are welcome to post any specific errors you discover to this discussion.

  • Trying to install adobe acrobat pro 9 on a new laptop after deactivating it on old laptop. After installation I get Update check for some reason then doesn't let me go any further Anyone know why this is?

    OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.

    Hi johnb49273320,
    What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
    It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
    Best,
    Sara

  • Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell. i GET THE ERROR WHEN I TRY TO Update my CS 5 Web premium

    I had to re-install my CS 5 Web Premium as i had to refresh my window. I try to update after activating. Then it says the product is not valid! God knows what's wrong with ADOBE!

    The messages you are receiving indicate that you are trying to install an upgrade version.  You are being asked to enter the name and serial number of the older product that you are upgrading from in order to prove that you qualify for using the upgrade.

  • Installing CS6 upgrade on CS5.0 ???

    Hi
    I have just purchased a CS6 design & web premium upgrade and I have a CS5.0 design premium. I have downloaded and tried to install the upgrade but it seems that it needs CS5.5 version to install.
    I have looked for an update download that can make my CS5.0 to a CS5.5 but no cigar :O((
    can you help me with this? thank you

    Get in touch with support. You have purchassed the wrong upgrade.
    Mylenium

  • Got message that installer was misconfigured when trying to install new Inspiration Browser on my Ma

    Tried to install  an upgrade to my Elements 9 Inspiration Browser on my Mac and got message that installer was misconfigured-- what can I do?

    Well, the first thing to do is to decide whether it's worth hassling with it at all, since the video tutorials are now available at tv.adobe.com.

  • Had lightroom in a pc, bought an iMac and trying to install lightroom

    The serial number I got when I installed in the pc is not working during my installation on the iMac, does any body knows if I have to buy the product again or there is a way to install the product that I already bought

    Lightroom serial numbers are valid on both Windows and Mac. Is the Lightroom you are trying to install and upgrade version? In other words, have you used a previous version of Lightroom?

Maybe you are looking for