Trying to install Mountain Lion 2012 Mac Mini

I am upgrading (downsizing) from an old Mac Pro running Lion, to a new 2012 Mac Mini running Mountain Lion.
I have a new SSD Hard Drive I want to install Mountain lion on via a USB dock, and then I will install it in the Mini to replace the slow 1TB drive that came with it.
The problem is, even though the 2012 Mini is running 10.8.2, (Mountain Lion) when I try to download/install Mountain Lion it tells me I cant download it and that OSX Mountain Lion is not compatible with this computer.
Which is ridiculous, as it is running 10.8.2 right now./
ideas?
Flustered.

If you want a fresh install of Mountain Lion on the
external, you should be able to boot into the Recovery HD
and select install OSX and direct it to install on the external
drive.
Then again, cloning is just so much simpler.

Similar Messages

Trying to download Mountain Lion on Mac Mini currently running Lion 10.7.4. Computer is set to never sleep. When I check progress it says "waiting" under purchases on App store. What does this mean? Way too long to still be waiting. HELP

Trying to download Mountain Lion on Mac Mini currently running Lion 10.7.4. Computer is set to never sleep. When I check progress it says "waiting" under purchases on App store. What does this mean? Way too long to still be waiting. HELP

In the app store where it says waiting, do you get the option to "resume"?

Clean install Mountain Lion on Mac mini Server (Mid 2011)

Hi.
I am trying to do a clean install of ML on a Mac Mini Server. This is just a test machine, so not interested in any backups, etc.
The machine is a Mid 2011 Mac Mini, and had Lion Server on it to start with (has been re-installed, reimaged, etc multiple times in it's short life with me so far ..)
I would like to set the internal disks up as a Software Raid 1 config.
I have a successfully created and tested USB stick with OS X ML install on it. I boot the mini with the USB stick, and once the installer options are available, I use the disk utility to create my software raid 1 config. Once this is completed, I proceed with the rest of the install.
Before I can go any further, I am warned that the installer will NOT be able to create a recovery partition, and use time machine backups on this drive.
If I break the raid and install on either one of the drives, the install proceeds without any problems.
Is there a method I can use to do a clean install on this machine with the drives configured as RAID 1?

This is the message that would happen with Lion, see this: http://support.apple.com/kb/HT4649
Basically when you setup a Raid 0/1, the Lion and Mt. Lion installer won't/can't create a recovery partition.
When you boot from a recovery partition you have access to certain tools, e.g. Disk Utility to restore a Time Machine back up, redownload the OS, etc.
The recovery partition provides a certain bit of convenience but isn't absolutely necessary to run the OS. When you see the message, doesn't it let you go ahead with the install, accepting that no recovery partition will be created?
If you need some of the recovery partition tools, you have a bootable USB stick as well as a backup of the Mt. Lion installer, no?

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

Tried to install Mountain Lion and it comes up with the following message Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

Go to  > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/

I am trying to reinstall mountain lion but Mac book pro failed to install.

I am trying to reinstall mountain lion but Mac book pro failed to install

Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Trying to install Windows 7 on Mac Mini Mid2011

Am trying to install Windows 7 on Mac Mini (Mid 2011) OS X Mountian Lion (10.8.2) - 2.3GHz/i5/4GB/500GB with external optical drive attached. Using Windows 7 Ultimate (on USB Flash Drive) and Windows Support Software (on separate USB Flash Drive), as the external optical drive is not recognized when Boot Camp restarts to begin installation process. Here are some issues I am having:
Going through BCA, when selecting the new partition to install on (Disk 0 Partition 4 BOOTCAMP), the warning of "cannot be installed...", so I select Drive Options (advanced)/Format. Drive is reformatted to the NTSF, but loses the BOOTCAMP name. (Reformats to UNTITLED);
Installation of Windows 7 proceeds, until after its third restart and the color bar with the light burst at its center appears at the bottom of the screen with messages stating "Preparing....". The computer then reboots and starts this endless boot loop.
As it never gets to the part where the Windows Support Software is engaged, can I have both the Windows 7 Ultimate installation and the WSS on the same USB?
I have been researching this issue, but with no difinitive solutions (other than snarky "You obviously didn't read the prior post for this issue..." & "Don't people READ previous posts?" responses.), other than one rude reply saying this was a known issues and there is a fix/driver for it, but no reference as to where this fix resides.
Please if anyone has a solution, I would be very grateful for serious and considerate answers. If you feel the need to be rude/snarky/downright unhelpful, don't reply. This is a community help page, not your venting page.
Thank you in advance for all serious replies.
JAMinard

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

Cannot install Mountain Lion on Mac Pro 4,1 (2009) - can anyone help?

Hi All,
I have a 2009 Mac Pro - purchased 2nd hand in January. I am trying to install Mountain Lion and had the same issues as other Mac Pro 4,1 owners have had.
I've tried installing from the installer exactly as downloaded from the App Store - this results in a grey screen, and I have to re-install Snow Leopard to get the machine running again.
I've tried creating a bootable USB stick. This boots into the installer, but then I get the message "Mac OS X could not be installed. Try reinstalling." which is the most ridiculous error message I've ever read.
I've unplugged all peripherals except keyboard/mouse and one monitor. I've removed all extra drives from inside, except for the system drive. I've removed the wireless card. And I still can't install Mountain Lion. If it had cost more than £14 I've be rather upset at the moment.
Does anyone have any sage advice that will get me running ML?
I do have a full error log I'm happy to share, if that will help.
Thanks in advance!

Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/

Trying to install Mountain Lion, getting Disk not formatted properly

I am currently running osx 10.6.8, trying to install Mountain Lion and when I am selecting the drive to install too I get:
"This disk is not formatted as Mac OS Extended (Journaled)..."
This is my master HD so i cant really just reformat it? Im not great with macs so step-by-step would help.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i7
System Version:          Mac OS X 10.6.8 (10K549)
Kernel Version:          Darwin 10.8.0

Open Disk Utility, select your Macintosh HD volume. In the status area at the bottom check that it is partitioned using GUID. Now click on the Journal icon in the toolbar above. This should fix it for you without having to reformat the drive.
Since you have the downloaded Mountain Lion installer I suggest you make a copy of it in your Downloads folder. Then do the following:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
    Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
    Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
    the copy into your Downloads folder. Now you can click on the Install button. You
    must do this because the installer deletes itself automatically when it finishes
    installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
      side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
      Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
      the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
      list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
      button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
     drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

My Mountain Lion install failed for the following reason:
OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
The message went on:
Visit www.apple.com/support/no-recovery to learn more.
The page is about a different failure, but I'm assuming the reason for my failure is this one:
The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528ASQ
Revision:          AP24
Serial Number:                      6V***5JR
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Failing
<Edited By Host>

If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case.

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton

I have tried to install Mountain Lion but it has failed to install properly

I have tried to install mountain lion but it has failed to install

If you open Finder and open your Applications folder list, under the alphabetically listed "I"'s you should see an application called "Install OS X Mountain Lion.app", if it downloaded OK. This is the package that you double click on to begin installation of Mountain Lion. Have you already done this?
Hope this helps

Trying to install Mountain Lion but I get an erroneous message - can't install on this drive as it's used for time machine backup (no it isn't and never has been)

Problem installing Mountain Lion on Mac Pro 3 - currently Snow Leopard

Look at the hard drive where Applications, Library, System, and Users are. There is most likely a backup file there. Delete it.
Can't Install OS on Volume Used by Time Machine

Mac broke while trying to install Mountain Lion

Well installing Mountain Lion turned out to be a disaster for me.
After downloading the installer and opening it, the Macbook restarted and went into the installer program. After waiting for about 10 minutes it told me the disk needed to be repaired. Fair enough, it's probably nothing, so I opened the Disk Utility app included with the installer. Repairing the disk failed, it told me it needed to be formatted. That not what I expected, but okay starting with a clean slate isn't such a bad idea anyway.
I tried to restart the computer to get back into Mac OS X, to see if anything needs to be back-upped. Sadly, it doesn't want to start up into OS X, I am taken back into the Lion install mode. Tried repairing again, but doesn't work, so okay, I'll format. Everything is on Github and Dropbox anyway.. Except that I can't format, because it refuses to unmount the disk. So I am stuck: can't repair, can't format, can't startup into OS X and can't install Lion / Mountain Lion.
I then created a Lion recovery disk using http://support.apple.com/kb/DL1433 and an USB drive. Started up from it, and still I could not format my drive because it did not want to be unmounted. So I don't know what to do anymore. It's even more weird because the Macbook was working just perfectly fine before, never any problems.
I don't have the DVD anymore, so that's not an option. Should I try single user mode? Bring it in? Buy a new hard drive?

It's being a pain in the arse huh?
Well zap the SMC and the PRAM, I suspect there is something there from the 10.8 installer that's trying to do it's thing.
#1 and #2 here
Step by Step to fix your Mac
Next try option key booting from the 10.7 Recovery USB again,
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
use Disk Utility to Erase the hard drive with the middle option (one step from the right option) on the entire drive (select the drive makers name and size) on the left, it will take a bit, map off bad sectors and give you a brand new EFI and GUID partition map whichh also likely have been borked by 10.8 update.
Then install 10.7 via the USB, then commnad r boot and AppleID and password (required) for 10.7 install, then try updating to 10.8 again, I think it will go well this time.
If not, if you have a Firewire cable and another Mac, you can T boot the sick Mac's hard drive to the desktop of the other and use Disk Utlility to wipe the drive that way.
Another method is to use another Mac to burn a ISO of Parted Magic to cd and option or c boot the problem Mac with that, use the default load in RAM option and it will spit out the disk, use the mount disk option and erase the disk with extreme prejudice. LOL.

Trying to install Mountain Lion 2012 Mac Mini

Similar Messages

Maybe you are looking for