Trying to install my hp deskjet F4280 to my lenovo computer

can u tell me y it won't install ?

Hi,
What is the exact error its showing on the computer?
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program not installed or can be damaged".

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
It`s right, the program is not istalld, it is what i`m trying to do. And there is no problem whit the DVD. Any suggestions?

"Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE!

I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to u

I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to uninstall it from my old computer first?

You are allowed to have two activated installations. If you happened to have one on this Windows 8 machine before, it is possible that the activation used for it was never deactivated (did you deactivate it before you upgraded Windows?). Talk to Adobe support thru chat. They might be able to resolve this with you:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Trying to install Adobe 10Pro on new Windows 8.1 computer. downloaded installer by it will not recognize my product key

Trying to install Adobe 10Pro on new Windows 8.1 computer. downloaded installer by it will not recognize my product key

Adding to what Pat has mentioned, I can also see that you have the serial number for both Mac & Windows. I hope you are using the correct key for the platform where in you are installing the product as that could be the only reason. Please check the keys once again and use the correct one and that should solve the concern.

Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

Hi Barbara,
Try Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.

Install Acrobat Pro program, with 32-bit Lenovo computer without problems. Try to install HP computer with 64 bits and rejects me. I wish instalárselo. What do I do?

Install Acrobat Pro program, with 32-bit Lenovo computer without problems. Try to install HP computer with 64 bits and rejects me. I wish apply. What do I do?

What is the version of Acrobat you are trying to install?
Response: Acrobat Pro 11.
Are you getting any error message?
Response: I am not allowed to install.
Acrobat can be installed in 64 bits machine.
Response: every attempt in the 64-bit computer I rejected all attempts.
2014-06-12 10:42 GMT-05:00 Anoop9178 <[email protected]>:
Install Acrobat Pro program, with 32-bit Lenovo computer without
problems. Try to install HP computer with 64 bits and rejects me. I wish
instalárselo. What do I do? created by Anoop9178
<https://forums.adobe.com/people/Anoop9178> in *Creating, Editing &
Exporting PDFs* - View the full discussion
<https://forums.adobe.com/message/6453389#6453389>

Tried to install OS X on my external HD my computer crashed

Tried to install OS X Disc 1 (which I believe was of 10.5 Leopard) on my external my computer crashed. I can't recover it. The hear the chim when it switches on but the screen is perminently white with no graphic or loading icon.
Here is what I did whilst running on Lion on my mid 2009 MPB:
Inserted the grey colour OS X Disc 1
Opened System Preferences
Selected the CD and clicked Restart
The MBP "restarted"
It stayed on this white screen for while a tapped a few keys and the mouse but nothing. (I hope tapping the keys mouse didn't cause anything bad to happen).
So I turnned it off and on again with the power button,. the same white screen issue
I could really do with some help on this, I use my computer I great deal and need for important things such as work. Thanks.

darkhorse85 wrote:
Tried to install OS X Disc 1 (which I believe was of 10.5 Leopard)
Here is what I did whilst running on Lion on my mid 2009 MPB:
The firmware has been altered as not to boot from 10.5 anymore.
my computer crashed. I can't recover it. The hear the chim when it switches on but the screen is perminently white with no graphic or loading icon.
Run through these User Tips
Gray, Blue or White screen at boot, w/spinner/progress bar
..Step by Step to fix your Mac
Create a data recovery/undelete external boot drive
My computer is not working, is my personal data lost?

Tried to install XP Pro, Deleted Restore Partition, Now Lenovo 3000 = Useless Paperweight

I ordered a Lenovo 3000 K100 57068347 from TigerDirect back in April with the intention of using it as a remote help desk workstation and a virus definition 'server'...
Well anyway, it shipped with Vista Home Premium, and I was much more interested in having XP on it for obvious reasons.
Last night, I attempted to install XP by booting off an XP Pro SP2 volume install CD. Everything was going well until it tried to load the HDD controller drivers and the install bluescreened -- I've had this experience with other Lenovos in the past and I know just to disable ACHI and set it to "compatible" IDE mode and it will work.
This time, all the drivers loaded without a problem, and the install began. I got to the screen where you choose the partition to install, and I chose to delete the first 2, and leave the restore partition alone. I wanted a clean XP install with as much HDD space as possible while still leaving me a parachute instead I needed to restore to factory default.
Problem was, once the system rebooted to continue the XP install, I got a "cannot read from disk -- press ctrl-alt-del to restart" in BIOS. No matter how many different ways I tried to configure the ATA options in the BIOS, I kept either getting a blue screen (when in ACHI mode) or the message above (when configured any other way).
Like an idiot, I thought -- "hey, maybe the restore partition is causing some conflict" and in haste, I deleted that partition too, thinking "there's no way I can't get a XP install on this totally clean drive." Well of course you know by virtue of me posting this message that didn't solve anything, and I kept getting the "cannot read from disk -- push ctrl-alt-del to restart" message.
So I decided... might as well use the restore DVD that came with the system and start over. This is where I started to hit the roof..... I booted off the LENOVO-PROVIDED VISTA SYSTEM RESTORE DVD, and when I got to the "choose a disk/partition to install to," I selected the now clean 298gb partition, and clicked next.
Imagine my shock and horror when the install gave me an error that "Windows cannot find a suitable volume to install." Keep in mind, I'm staring a brand new clean 298gb partition in Windows install, and it's telling me it cannot find a suitable volume to install to. At the bottom, there was another error message that said (paraphrased) "This system may not be able to boot off the selected disk." This makes me think again that it doesn't have the correct driver to boot off the disk.
I tried it in ACHI mode, IDE compatible mode.... again trying every possible combination to get it to work. Nothing. Then I remembered -- "Ahh the Vista driver pack CD" that also came with the restore DVD. Pop that in, choose "load driver" for the disk, scan the entire CD, NOTHING....
So, to make a long story longer, I now have a $500 Dual Core 1.6ghz 3gb 300gb paperweight sitting under my desk. I can't boot off and install using the XP CD, I can't boot off and install using the Lenovo restore DVD, and I can't even boot off and install Vista Ultimate off a DVD that I had.
Can anyone tell me:
1) What the hell drivers do I need to make the XP install work? I would REALLY like XP above all else.
2) Why the hell doesn't the Lenovo system restore DVD work? Why would Vista not be able to boot off and install the disk when it's the manufacturer-provided disk to restore your system to factory state??
3) (more of a side note) Why does my serial number display as "invalid" in BIOS and also as "invalid" when I attempt to enter it on the Lenovo support site? This scares the hell out of me -- if I call, they're probably just going to tell me it's invalid. Can I get support from ANYWHERE with this issue? I'm not very happy with Lenovo at this point (but I'm just looking for a scapegoat to blame my own haste on)
Help!!

My apologies for the frustration that you have felt with your system. I just want to let you know that this is not a normal experience and I will help as much as possible to get you back towards having a working system. My experience with these boxes is rather limited since we do not normally see many escalations on them here but I will do my best to answer your concerns/issues.
1) The support site is still segmented a bit for the Lenovo IdeaCentre and Ideapad systems. For your K series desktop you have to go here to get drivers/support docs. All the available drivers should be downloadable from this link. Unfortunately I don't see any XP Drivers listed for that system however. You may have to locate drivers from the chipset manufacturers sites themselves if you want to go with a retail copy of XP. I've also found that the latest service pack for XP contains updates to many drivers and may contain the ones you need.
2) Your Recovery CD set should work. Have you tried booting off of the first CD? What errors are you encountering?
3) have you recently had anything that could have wiped out the BIOS settings? I'm curious because normally the machine type and serial are loaded from the factory.
4) For your XP Installation it appears that you got all of the XP files installed on the drive but when you rebooted it then lost site of the HDD? Is it seen in the BIOS? If so you may just have a Master Boot record that got scrambled. You can run FDISK /MBR using a XP Boot diskette and that should fix the issue if that is the source. You'll know its fixed if you get the xp logo soon after you reboot.
I would suggest that you contact the Consumer support line and get the system serviced ASAP. They can get the serial number loaded properly, fix the startup sequence problem it appears your having, and get the system reloaded properly.
You can contact them at 1-877-453-6686
Ed Shumpert
Thinkcentre/Desktops Launch Readiness Program Manager
US Service & Support

I tried to install the latest itunes on my Windows 8 computer and it is not responding. Nothing happens.

I got an HP computer with Windows 8 already loaded on it. I have tried unsuccessfully for months to put itunes on this computer. I try and then give up. All I am able to get is a non-responsive program. Just a white screen with a blue spinning circle. I have tried several suggestions - run in administrator mode, try changing the compatibility, but am lost and frustrated. I am not very technologically savvy, so please help!

Hello cnitz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
Best of luck,
Mario

Trying to install adobe premier elements 12 on windows 8 computer. New computer doesnt have CD rom drive

Hello,
I'm having a bit of a problem. A few months ago, I purchased Adobe Premiere and today i decided to get a new computer to help me edit videos faster. Now I'm trying to add the old software to my new computer so that I can use it. Unfortunately, the computer that I have now doesn't have a CD Rom drive and since they've already updated the software to the new elements 13, I cant seem to find the link to re-install Elements 12. I NEED HELP ASAP. My first real gig is tomorrow. Thank you all for the help!
-Taylor Peterson

taylor_peterson92
I am not sure where John is coming from on his replies on this.
If you purchased Premiere Elements 12 from Adobe direct as an online download purchase, then you go to the adobe web site (http://www.adobe.com)
sign in, put "My Orders" in the Search field, and then follow the "My Orders" link to your program order where you should find an opportunity to download new files.
Alternatively, you can go to the following web site, download and install the Premiere Elements 12 tryout, and insert your purchased serial number into those files during installation.
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
You need to read and carry out carefully the Note: Very Important Instructions at that web site so that you do not run into Access Denied messages.
Please let us know if you OK with the above details. If not, please do not hesitate to ask for clarification.
Thank you.
ATR

I get a message when trying to install firefox 3.6.10 that says "your computer must be restarted to complete a previous uninstall of Firefox." I have rebooted repeatedly, but still get this message. How can I get past this?

I attempted to do the update on Firefox 3.6.9 and it said that it could not update because Firefox was still running even though it did not appear in the list of processes in the task manager. I decided to reinstall Firefox and the above message now is displayed each time I restart my computer and attempt to install Firefox 3.6.10.

C:\Users\<user>\AppData\Local\Mozilla\Firefox\Profiles\xuab2q88.default is the location of the cache folder for your default profile. If the updates folder isn't there then it looks that Firefox hasn't downloaded an update.
You can download the full version from http://www.mozilla.com/firefox/all.html
Delete the Firefox program folder: C:\Program Files\Mozilla Firefox
That will remove all Firefox program files in case some are locked or protected by security software.<br />
That should allow you to install a full version of Firefox 3.6.10
Your Firefox profile data is stored elsewhere and won't be affected.

HT1455 I tried to install windows 7 on my imac but the computer was not booting again what shall I do?

I was installing windows 7 on my imac but the installation was not completed and now I cannot boot what shall I do?

Provided you used BootCamp to do the installation, with your machine off, press and hold down the "Option" key while turning it on. Hold the key down until you get the screen where you can select which OS to boot into. Select OS X (you'll need to physically click the button here... tapping won't work if you have it enabled). Once in OS X, go into System Preferences and Startup Disk. This is where you set the default OS to boot into. Change it to OS X. Relaunch BootCamp Assistant to remove the failed installation of Windows. You can try again if you wish.

Printer hp deskjet f4280 not working

I tried to use my hp deskjet f4280 on arch linux, but it does not work.
I have downloaded cups from the repo.
The cups demom is active.
The printer is connected to the usb port.
http://127.0.0.1:631/ enters the cups administration.
Find new printers finds the printer and I added it with the default options.
Print test page does not do anything.
Any ideas or hints. Thanks.
Helmut

it sounds like you have the wrong driver installed, I had similar symptoms with an epson printer,
what drivers are you using? and try this, it might be what you are looking for
pacman -S foomatic-db-hpijs
this should contain a driver that will work for your printer.

PLEASE HELP!! Trying to install an HP Printer

I am trying to install my HP Deskjet 3940 to my Mac Mini. When I put in the disk provided by HP, and double click a message comes up saying: "An error occured while reading the installer data. This installer appears to be damaged". So I went to HP's website to download the driver, made sure I had everything correct, (download to Mac OS X, correct model # of the printer, etc.). Once it has downloaded and I double click, a message comes up saying: "error creating file, data not found". Please, if anyone knows how to help! I have called both HP and Apple with no success. Has anyone come across this same problem and soved it??

1st Time Mac User,
The 3940 driver is included in the latest version of OSX. There's a pretty good chance you could just plug it in and it will work. No CD necessary.
If you're using it as a network printer on Airport Extreme/Express, follow these directions: http://www.ifelix.co.uk/tech/1300.html -- use the 3840 driver.
Or you could use the HPIJS CUPS driver if 10.3.8 doesn't automatically recognize the printer: http://www.linuxprinting.org/macosx/.
-Wayne

Error while trying to install printer on Airport Express

Hi,
I'm trying to install a HP Deskjet 3930 on my Macbook through the Airport Express. I'm getting an error:
An error occured while trying to add the selected printer Error:-9672
Anyone have any ideas?

BINGO!!
After trying every driver possible (and there were many...), I finally got my HP Deskjet 3930 to print through Bonjour. Here's how:
1. Reset the printing system with Printer Setup Repair from fixamacsoftware.com
2. Add a new printer with Printer Setup Utility
3. Select the HP 3930 connected through Bonjour
4. Instead of using the default HP driver, select the HP PSC 1110 Foomatic/hpijs driver (available at http://www.linuxprinting.org/macosx/hpijs/)
I've tested the printer on a variety of print jobs and so far everything seems to be working smoothly. I should probably note that this driver does not grant access to the printer utilities, but at least it works.
Hopefully someone finds this useful.
Macbook Pro Mac OS X (10.4.7)

Trying to install my hp deskjet F4280 to my lenovo computer

Similar Messages

Maybe you are looking for