Trying to install new lightroom not showing int CC app

I use the Photography CC and I'm trying to instill new versioin of Lightoom. Its not showing in my CC app (just the "try" button) I have tried logging out and back in

I solved it.
I, originally, download and installed the software under the Mac App Store when I was using OS X Mavericks.
I was getting all sorts of error messages from the Mac App Store under Snow Leopard.
I simply copied that version to my working OS X Snow Leopard disc and it is working fine, now.
Thank goodness for having multiple backups on three drives!
Whoo! Spent a good chunk of the day trying to figure this one out!

Similar Messages

When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise

When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise

Go to Setings>iTunes and App stores and make sure you are signed into your account

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

I have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5 or Later
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

HT201364 trying to install new software for OS mavericks and i get the he product distribution file could not be verified. It may be damaged or was not signed.can you assist

trying to install new software for OS mavericks and i get the the product distribution file could not be verified. It may be damaged or was not signed error message
.can you assist

What "new" software?
Barry

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194).

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.

When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

Im trying to install new drivers for my printer and it will not accept my password

Im trying to install new drivers for my printer and it will not accept my password

Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario

There ' is a panel that sayscopy' preparing to duplicate to "desktop". I clicked stop three days and it still trying to stop. Tried to 'force quit' does not show up, looked in activity monitor but i am not sure how it is listed. I am new to the mac world.

there is panel in the upper right corner of my screen that says 'copy' preparing to duplicate to "desktop". I clicked stop three days ago and it is still trying to stop. Tried to 'force quit' does not show up in finder, looked in activity monitor but i am not sure how it is listed. I am new to the mac world.

Force quit/Restart the Finder.
Then for safety...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

I'm trying to install new software and my keychain asks for my password I put it in says its not right, gives me hint, same password it is the one I always use, so what do I do now?

I am trying to install new software on my Imac and my keychain asks for my password, I type it in, it says it is wrong, I do it again, wrong, it gives me a hint, same one I have been using, wrong again, so I cannot get the new soft ware to download, how do I get my passwork on the keychain to work or how do I change it?

What model iMac and what version of the Mac OS is installed? "About this Mac" from the Apple menu is a good place to start.

New lightroom not opening on mac

Trying to open new lightroom CC on my mac and it shows the image and then crashes straight away. I've not taken off the old lightroom. What should I do?

Try signing out of the CC desktop app, then sign back in again.

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

Camera new d810 not showing pix up in raw files in elements 11

camera new d810 not showing pix up in raw files in elements 11 and lightroom 4

DNGC 8.7 can be found, here: http://www.adobe.com/downloads/updates/
You can purchase upgrades to LR and/or PSE, here:
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html

My iPad is stuck--when I tried to install new IO7 (auto-invite) it stuck at the Agree/Disagree page. How do I get it going, get unstuck, or dump the new OS?

My iPad is stuck--when I tried to install new IO7 (auto-invite) it stuck at the Agree/Disagree page. How do I get it going, get unstuck, or dump the new OS?

Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Flashbuilder stalls when trying to install new software

hey all, for some reason Flashbuilder does not want to install new software. It just sits there forever calculating. Has anyone else seen this before? It used to work fine. Not sure what's changed.

25-May-200712:31 PM
len112 wrote:
I get this message when trying to install new software updater
error 2378 could not access vbscript run time for custom action
how do i solve this please
Hi len112
Have a look at this site:
http://www.nitropdf.com/kb/article.aspx?id=10106
Happy to have helped forum in a small way with a Support Ratio = 37.0

Trying to install new lightroom not showing int CC app

Similar Messages

Maybe you are looking for