Trying to install nvidia and nvidia-utils via pacman and failed

I type
pacman -Sy nvidia nvidia-utils
i get:
resolving dependencies...
looking for inter-conflicts...
:: util-linux and util-linux-ng are in conflict (linux32). Remove util-linux-ng? [y/N] Y
error: failed to prepare transaction (could not satisfy dependencies)
:: aufs2: requires kernel26<2.6.38
:: ndiswrapper: requires kernel26<2.6.38
:: tiacx: requires kernel26<=2.6.37
I cant seem to get it to install nvidia and consequentially lots of things are borked.
Any ideas what I can do to start solving this?
Last edited by netw1z (2011-09-19 15:35:34)

Don't run 'pacman -Sy foo' - it may lead to breakage https://bbs.archlinux.org/viewtopic.php?id=89328
Are you using [testing]? http://mailman.archlinux.org/pipermail/ … 21479.html
Last edited by karol (2011-09-19 16:06:50)

Similar Messages

  • I have a hung VAIO when trying to install a VAIO update utility. Can

    I have a hung VAIO when trying to install a VAIO BIOS utility. I know it is not a good idea to shut down when actually installing a BIOS. Is this the same operation or is the utility install a separate operation?

     
    Hi jamesjewell1, 
    Welcome to Sony Community! 
    It is important not to interrupt the process of Updating BIOS and also Formatting the laptop. Have you tried to access BIOS again? What is the complete model name of the laptop? You may try to reset BIOS then test the unit. Or try to reseat the CMOS battery of the laptop. 
    Hope these help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Trying to install update and error message says older version of itunes cannot be removed

    trying to install update and error message says older version cannot be removed

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Tried to install CS2Premium and it says it is no longer supported...help, please

    I just bought a new mac mini, tried to install CS2Premium and it says it is no longer supported...help, please

    You cannot install CS2 on a new Mac Mini running OS X Yosemite. CS2 is far too old.
    CS2 was written for older PowerPC based Macs running OS 10.3.8 or earlier.
    Modern Macs use Intel processors which are not compatible with PowerPC software.
    Furthermore, Yosemite no longer includes Rosetta (a utility formerly included - but long discontinued - by Apple in OS X to run PowerPC applications on Intel Macs).
    You'll either have to buy a new full version of CS6 or join the Cloud.

  • I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

    i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • Having a problem with my ipad... I tried to install ios and the ipad has frozen

    I am having a problem with my Ipad air.  tried to install ios and my ipad has frozen

    Click here and follow the instructions.
    (124611)

  • I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

    I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
    RJ@

    Try to connect on Live chat one more time.
    Still not connected , better to contact Adobe Phone Support
    Click on Phone option and check once :
    Contact Customer Care

  • I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

  • ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

    iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • When trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor

    when trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor

    I have the same problem

  • When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install a

    When I start downloading apps on creative cloud with windows 7 professional 64 bit, Creative cloud blanks out and stays blank til I re-start the program. I have tried re-installing it and deleting the OMP file. What do I have to do to be able to install apps?

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • TS2951 I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again

    I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again. How can I resolve this?

    Is your data backed up?
    Are you running any non-Apple system optimization tools?

  • TS1567 can't see my iphone and my ipdad on itunes, i have tried re-installing itunes and yet still nothing happens, pls help

    can't see my iphone and my ipdad on itunes, i have tried re-installing itunes and yet still nothing happens, pls help

    http://support.apple.com/kb/TS1538

  • I'm trying to install Mavericks and got this message: You need 4.94 GB of available space to download OS X Mavericks. Remove items from your startup disk to increase available space. How do I do this?

    I'm trying to install Mavericks and got this message: You need 4.94 GB of available space to download OS X Mavericks. Remove items from your startup disk to increase available space. How do I do this?

    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • I am trying to install OSX and I get "could not find installation information for this machine" what do it do?

    Trying to install OSX and i get "could not find installation information for this machine" what do i do?

    someone will be by to edit, in the meantime, NEVER post your serial number.
    They wanted you to go to the Hardware section of System Profile and the part that looks like
    MACBOOK PRO N,1
    Anyone here has Mac Pro of 1,1 thru 6,1
    http://www.everymac.com is a good place to look at model specs and history of that model, max RAM and other features.

Maybe you are looking for

  • Library Problem/Question

    My library file no longer has the aperture icon in it, it has been made into a folder with a .aplibrary extention. Any ideas or help.? Thanks

  • SQL runs fine on DB11.2.0.1.0 but fails on DB9.2.0.8.0 with errors.

    The below SQL runs fine on DB11.2.0.1.0 but fails on DB9.2.0.8.0 with error: WITH users_with_dba_privs AS ERROR at line 1: ORA-00604: error occurred at recursive SQL level 1 ORA-00904: "from$_subquery$_005"."PARENT": invalid identifier SQL WITH users

  • Adobe forms to webdynpro triggering

    Dear sir I hav created one adobe forn which giving input as a material then output displaying  material in the PDF  format. after that i have connected that form into webdynpro using interactive form----> template source i hav atteched. i want to giv

  • How do i do a factory reset on a compaq presario cq60

    I need to do a factory reset I have tried the F11 and just get a restore. I hac a presario cq60 with the presario set up on the  D drive.

  • "Power Nap" & "Find My Mac" not working together

    Is anyone else having issues with "Find my Mac" and Power Nap? Its supposed to be to find the MacBook air when it is sleeping but im not having any luck. my MacBook air has the latest firmware, and find my Mac is enabled under iCloud. I can find my M