Trying to install Oracle 11.5.10.2 on AIX - first steps

Hi.
Oracle 9.2.0.5.0. AIX
I have created the necessary directories on our development machine, and each of them contains the contents of each of the 8 DVDs from the software bundle I have been given.
Im not sure of the next step. I have this metalink document, Note:316803.1, but its less than specific.
I also see this thread here on the forums, 11.5.10.2 Rapid Install fails - Invalid Disk talking of a Stage Area. Again, Im not sure if such a Stage Area is needed.Actually, just reading another thread here, looks like as I have copied each disk into its own directory there is no need to create a stage area ...
As I understand, I should go to the first Disk 1 Start Here, but after this Im unsure. (run rapid install - how?)
This is not an upgrade but a clean installation.
Thanks (for any metalink links or any other sources)
Im just checking this out : http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/r115102ins.pdf might be of some help I hope.
Message was edited by:
Dan A

Hi,
Please post your queries here.
On Demand: E-Business Suite
Also, i found one and hope this helps.
Oracle 11.5.10.2 Installation on Linux

Similar Messages

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

Error while trying to install Oracle 8.15 on Redhat 6.1

I have been trying to install Oracle 8i (8.15) on my machine but I got an error while trying to run runInstaller:
Initializing java virtual machine from /usr/local/jre/bin/jre. Please wait
Error in CreateOUIProcess(): -1
: Bad Address
FYI:
- I downloaded the Oracle 8i from the technet download site (I am not using a CD)
- I am using Redhat 6.1
- I downloaded and installed JRE as advised in the documentation.
- My machine is a AMD K6, so is non-intel but I have not noticed any other problems using Redhat.
- I currently only have 96MB RAM as opposed to the recommended 128MB.
Please Help!!!
null

(All comments are based on redhat 6.0, not sure about other distros)
If u are only using one linux machine, then I don't think you need to have 'DISPLAY' defined. Unset it then. This variable tells X clients where to display its X output. If unsetting does not make it work, then try 'export DISPLAY=ip_address:0.0' and then 'xhost +ip_address', where ip_address is the IP of your machine, or try 127.0.0.1.
If u have two linux machines, like what I did:
* Ran X on client machine (192.168.0.2).
* Telnet to server machine (192.168.0.1 - where 8i will be installed), login as 'oracle'
* On the telnet session, I 'su' as root then mounted the CD, then 'exit' to return to the 'oracle' login on the telnet session.
* On the telnet session, I did 'export DISPLAY=192.168.0.2:0.0' - telling it that all X clients on this telnet session will send its X output to the host on 192.168.0.1.
* On the client machine (where X is running), opened another shell, did a 'xhost +192.168.0.1' - telling the X server on the client machine to accept X connections from the server machine (192.168.0.1).
* Went back to the telnet session to the server machine, then ran the installer.
In short, everything you do can be done remotely, apart from putting the CD on the server machine.
The installer runs on the server but send its output to the client.
null

I am trying to install Oracle 9i on Windows Server 2008

Hi
I am trying to install Oracle 9i on Windows Server 2008.
While installing third CD it shows the following error message
"jrew.exe has stopped working"
Please guide me what to do next as early as possible.
Thanks

Why?
The general policy of Oracle is very simple:
it certifies against the current version of the OS.
It never re-certifies against new releases of the OS.
Windows 2008 didn't exist when Oracle 9i was released.
Sybrand Bakker
Senior Oracle DBA

Trying to install Oracle 8i on Windows XP

I had been trying to install oracle 8i on Windows XP with no success so far; Every time a start the setup the program just shutdown without any message. I changed the security of the Explorer to low but the result is the same.
Does anybody know why?
Thanks in advance....

This is an issue Intel Pentium 4 Processors, Sun JRE and Symantec JIT will encounter this problem.
Work around and info in the following links;
http://www.indiana.edu/~dms/databases/oracle/pentium_iv_bug_fix.htm
http://support.intel.com/support/processors/pentium4/issues.htm

Jrew.exe has stopped working when iam trying to install oracle on vista

hi,
iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving it

Duplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista

Error when trying to install Oracle BPEL Process Manager

I'm receiving this when trying to install Oracle BPEL Process Manager
setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
If you click in the details, I can see:
Error signature
AppName: setup.exe AppVer: 0.0.0.0 ModName: unknown
ModVer: 0.0.0.0 Offset: 20224d41
Does anyone knows what it mean?
Thanks,
Leandro

Hi Leandro,
Check whether you have downloaded the file properly and size of the file is same as what mentioned on the download page.
Regards,
Anuj

ORA-12701 when trying to install Oracle on OpenSuse

So, I'm trying to install oracle 11g r2 on OpenSuse (11.3, 64bit), and when I try to create DB with command
create database bongo
logfile group 1 ('/opt/oracle/oradata/db_name/redo1.log') size 100M,
group 2 ('/opt/oracle/oradata/db_name/redo2.log') size 100M,
group 3 ('/opt/oracle/oradata/db_name/redo3.log') size 100M
character set WE8ISO8859P2
national character set AL16UTF16
datafile '/opt/oracle/oradata/db_name/system.dbf' size 500M autoextend on next 10M maxsize unlimited extent management local
sysaux datafile '/opt/oracle/oradata/db_name/sysaux.dbf' size 100M autoextend on next 10M maxsize unlimited
undo tablespace UNDOTBS1 datafile '/opt/oracle/oradata/db_name/undotbs1.dbf' size 100M
default temporary tablespace temp tempfile '/opt/oracle/oradata/db_name/temp01.dbf' size 100M;I got an error:
national character set AL16UTF16
ERROR at line 6:
ORA-12701: CREATE DATABASE character set is not known
what's missing?
regards and happy new year

Hello,
WE8ISO8859P2Are you sure about this Character Set ?
You may try with WE8ISO8859P1 or WE8ISO8859P15 for instance.
You'll have the list of Character Set for Oracle 11.2 on the following Tables:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10729/applocaledata.htm#CIAEICDE
Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jan 1, 2011 10:20 PM

TRYING to install Oracle Forms 6i w/ PO8i... please advise

Hi, I currently have Personal Oracle 8i installed on an HP Pavilion Win98. I have taken a class called Personal Oracle and have bought a few books and have been learning SQL, SQL Plus, and trying PL/SQL. However, I also want to learn some development skills and have tried to install Oracle Forms 6i (the version I have is for 95/98/NT, so at least I know I have the correct platform compatability). When I try to install Forms I'm getting 'missing file' errors that prevent the installation. Does the Oracle Home 'Name' and 'Location' have to be the same as the Personal Oracle installation, do they need to be different? Everything I'm doing for now will be done entirely on this machine, so location of data is not an issue. These are the files missing when I try to install:
jre11.map
rsf73.map
cdesql60.map
I had the 'cdesql60.map' missing file error first. Then I did a couple of other things (don't know what the heck I did) and then I get the 'rsf73.map' error, then the 'jre11.map' error. I tried using the universal installer but there seems to be no 'products.jar' file on the Forms 6i disc.
Can anyone please help me figure out how to get this Forms disc installed?!
Many thanks in advance...
Please drop me an email at:
[email protected]
null

Forms 6i have to installed on a separate oracle home than the oracle DB as it overwrites some dll files already existing in the 8i oracle home. Install Form 6i on a separate oracle home.

Install oracle 8.1.7.4 on AIX 5.3

I want install oracle 8.1.7.4 on AIX 5.3, but i but keep install oracle 8.1.7 4 in 32 - bit , Can i get any problem ?

Metalink:
Error Correction Support (ECS): 31-DEC-2004
Extended Support (ES): 31-DEC-2007
Extended Maintenance Support (EMS): 31-DEC-2006
If you got the appopriate contract support, you should be able to order 8iR3 by metalink. But you will not find it on OTN

Please How i can install Oracle weblogic 10.3.5 on AIX

Please How i can install Oracle weblogic 10.3.5 on AIX

HI ,
First of all, you should read following link : Oracle WebLogic Platform 10.3 on IBM AIX 5.3 pSeries
Thank you

Please help: trying to install Oracle 8.1.6.0 on Mandrake 8.1

Hi, I am trying to install Oracle8i that comes with "Oracle for Linux Starter Kit" on Mandrake 8.1. Could someone please give tips or pointer how i can accomplish this? The Universal Installer starts fine, but then a dialog pops up about compiling sqlplus. here is a piece from the log file:
Calling action unixActions1.7.0.17.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /usr/oracle/sqlplus/lib/ins_sqlplus.mk
     installTarget = install
     undoMakeFileName =
     installArguments = ORACLE_HOME=/usr/oracle,
     logFile = /usr/oracle/install/make.log
     undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk
Exception Severity: 1
Calling action unixActions1.7.0.17.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /usr/oracle/network/lib/ins_net_client.mk
     installTarget = install
     undoMakeFileName =
     installArguments = ORACLE_HOME=/usr/oracle,
     logFile = /usr/oracle/install/make.log
     undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /usr/oracle/network/lib/ins_net_client.mk
Exception Severity: 1
*** Cancel Dialog: ***
User selected: Stop installation of all products.
Error in invoking target install of makefile /usr/oracle/network/lib/ins_net_client.mk
Unable to read /usr/oraInventory/oraInventory/Contents/OracleHomesList.ser. Some inventory information may be lost.
Unable to read /usr/oraInventory/oraInventory/Contents/LibsList.ser. Some inventory information may be lost.

I had the same problem with Oracle 9i on Mandrake 8.1. I am not sure if the same fix will work or not. See my 9i on 8.1 notes at:
http://members.home.net/joseph.j.flynn/oracle.htm
snip---
You will get a link error after all of the copying and unpacking has been done somewhere in disk 3. Leave the error message up on the screen and go edit the $ORACLE_HOME/bin/genclntsh script. Blank out the LD_SELF_CONTAINED env var. Save and execute the script. Hit the retry button on the installer. The alternative approach to this involves downgrading the binutils but that seemed to get awfully messy to me. (thanks to a post from Helmut Seruega for this fix)

Has anyone tried to install Oracle 11g R1 on Windows 7?

I'm planning to install Oracle 11g R1 (or R2) on Windows 7 but I don't see Windows 7 as one of the supported OS.

During installtion I got error
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
========================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
then I check the boxes(user defined)
Installation is done.
After installation I got tns listener error
then I tried these steps to fix the error and its working fine
On cmd prompt
set ORACLE_HOME=c:\oracle\ora11g
path=c:oracle\ora11g\bin;(path should contain bin folder)
set ORACLE_SID=orcl
set system environment variables also
restart pc
tnsping orcl
Add one line to the WINDOWS/SYSTEM32/DRIVERS/ETC/HOSTS FILE
IP_address hostname.domainname hostname
LISTENER.ORA
make sure host name is correct
tnsnames.ora
sqlnet.ora

Trying to install Oracle 11G R1 on AIX 6

While trying to start the installation on the AIX server am receiving the below message and the installation Stops and never continues.
can anyone help...
Module=/crmdb/OraInstall2011-03-01_04-17-10PM/jdk/jre/bin/libj9jit23.so
Module_base_address=090000000337F000
Target=2_30_20070131_11312_BHdSMr (AIX 6.1)
CPU=ppc64 (16 logical CPUs) (0x80000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/crmdb/core.20110301.161715.7733330.dmp'
JVMDUMP010I System Dump written to /crmdb/core.20110301.161715.7733330.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/crmdb/Snap0001.20110301.161715.7733330.trc'
JVMDUMP010I Snap Dump written to /crmdb/Snap0001.20110301.161715.7733330.trc
JVMDUMP007I JVM Requesting Java Dump using '/crmdb/javacore.20110301.161715.7733330.txt'
JVMDUMP012E Error in Java Dump: /crmdb/javacore.20110301.161715.7733330.txt
JVMDUMP013I Processed Dump Event "gpf", detail "".

Goodnight,
I have the same mistake I did the export of JAVA_COMPILER = NONE and I generate this error, you can help me to install Oracle 11.1 on AIX 6.1 ... Thanks
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 190 MB. Actual 1513 MB Passed
Checking swap space: must be greater than 150 MB. Actual 32768 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 1
6777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-03-29_08
-53-12PM. Please wait ...Mar 29, 2011 8:53:36 PM java.util.prefs.FileSystemPrefe
rences$2 run
WARNING: java.io.IOException: The file access permissions do not allow the speci
fied action.
Exception in thread "Timer-0" java.lang.SecurityException: Could not lock User p
refs. Lock file access denied.
at java.util.prefs.FileSystemPreferences.checkLockFile0ErrorCode(FileSys
temPreferences.java:956)
at java.util.prefs.FileSystemPreferences.lockFile(FileSystemPreferences.
java:945)
at java.util.prefs.FileSystemPreferences.sync(FileSystemPreferences.java
:751)
at java.util.prefs.FileSystemPreferences.flush(FileSystemPreferences.jav
a:844)
at java.util.prefs.FileSystemPreferences.syncWorld(FileSystemPreferences
.java:488)
at java.util.prefs.FileSystemPreferences.access$1200(FileSystemPreferenc
es.java:61)
at java.util.prefs.FileSystemPreferences$4.run(FileSystemPreferences.jav
a:447)
at java.util.TimerThread.mainLoop(Timer.java:527)
at java.util.TimerThread.run(Timer.java:477)
Mar 29, 2011 8:54:29 PM java.util.prefs.FileSystemPreferences$3 run
INFO: Created system preferences directory in java.home.
Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Unhandled exception
Type=Segmentation error vmState=0x00000000
J9Generic_Signal_Number=00000004 Signal_Number=0000000b Error_Value=00000000 Sig
nal_Code=00000033
Handler1=09001000A056FC78 Handler2=09001000A0567538
R0=000000011075CBE4 R1=0FFFFFFFFFFFBE40 R2=0000000000000006 R3=0000000000000001
R4=0000000111AE96A8 R5=0000000111AE96B8 R6=0000000111AE95E8 R7=0000000111AE95E8
R8=0000000000000008 R9=0000000111AE96B8 R10=0700000000613CC0 R11=0900000002831C3
8
R12=0000000110EE32D8 R13=00000001100138A0 R14=0000000111AE96E8 R15=00000001100A4
000
R16=0000000110F892F0 R17=0000000113197068 R18=09001000A05733B0 R19=0000000000000
02A
R20=000000011202FC98 R21=0000000111AE97E0 R22=00000001100A4080 R23=0000000000000
000
R24=0000000113226500 R25=0000000113226500 R26=070000000060C398 R27=0000000000000
000
R28=0000000000000031 R29=0000000000000000 R30=0700000000798C68 R31=0000000000000
000
IAR=0900000002831C38 LR=000000011075D42C MSR=A00000000000D032 CTR=0900000002831C
38
CR=8258584420000004 FPSCR=8200200000000000 XER=2000000482002000
FPR0 4024000000000000 (f: 0.000000, d: 1.000000e+01)
FPR1 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR2 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR3 3fee666660000000 (f: 1610612736.000000, d: 9.500000e-01)
FPR4 4530000000000000 (f: 0.000000, d: 1.934281e+25)
FPR5 3fbc28f5c28f5c29 (f: 3264175104.000000, d: 1.100000e-01)
FPR6 000000000000ffff (f: 65535.000000, d: 3.237859e-319)
FPR7 0000000082004000 (f: 2181054464.000000, d: 1.077584e-314)
FPR8 8000000000000000 (f: 0.000000, d: -0.000000e+00)
FPR9 4040874000000000 (f: 0.000000, d: 3.305664e+01)
FPR10 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR11 3fee666660000000 (f: 1610612736.000000, d: 9.500000e-01)
FPR12 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR13 400c1599a0000000 (f: 2684354560.000000, d: 3.510547e+00)
FPR14 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR15 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR16 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR17 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR18 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR19 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR20 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR21 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR22 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR23 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR24 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR25 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR26 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR27 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR28 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR29 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR30 0000000000000000 (f: 0.000000, d: 0.000000e+00)
FPR31 0000000000000000 (f: 0.000000, d: 0.000000e+00)
Module=/tmp/OraInstall2011-03-29_08-53-12PM/jdk/jre/bin/libj9jit23.so
Module_base_address=0900000002807000
Target=2_30_20070131_11312_BHdSMr (AIX 6.1)
CPU=ppc64 (24 logical CPUs) (0xf80000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/tmp/core.20110329.205434.4915342.
dmp'
JVMDUMP010I System Dump written to /tmp/core.20110329.205434.4915342.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/tmp/Snap0001.20110329.205434.491534
2.trc'
JVMDUMP010I Snap Dump written to /tmp/Snap0001.20110329.205434.4915342.trc
JVMDUMP007I JVM Requesting Java Dump using '/tmp/javacore.20110329.205434.491534
2.txt'
JVMDUMP010I Java Dump written to /tmp/javacore.20110329.205434.4915342.txt
JVMDUMP013I Processed Dump Event "gpf", detail "".

I Am Trying to Install Oracle WebLogic under Snow Leopard

Hello,
I am trying to install a Generic version of Oracle WebLogic App Server on my MacBook running Snow Leopard. The installation process asks for JDK selection
either a bundled JDK or a local JDK and one as to specify the location of the JDK.
I have tried to locate the JDK all over but have been unsuccesful. I would deeply appreciate it if anyone could point me to where the location of the JDK is under Snow Leopard, which will enable me to proceed with the installation of Weblogic.
Thanks in advance !

Take a look here
http://blogs.sun.com/wahmed/entry/installingweblogics_10_31
Hope that helps.
Message was edited by: Dave Sawyer

Trying to install Oracle 11.5.10.2 on AIX - first steps

Similar Messages

Maybe you are looking for