Trying to install Oracle 8i on Windows XP
I had been trying to install oracle 8i on Windows XP with no success so far; Every time a start the setup the program just shutdown without any message. I changed the security of the Explorer to low but the result is the same.
Does anybody know why?
Thanks in advance....
This is an issue Intel Pentium 4 Processors, Sun JRE and Symantec JIT will encounter this problem.
Work around and info in the following links;
http://www.indiana.edu/~dms/databases/oracle/pentium_iv_bug_fix.htm
http://support.intel.com/support/processors/pentium4/issues.htm
Similar Messages
-
I am trying to install Oracle 9i on Windows Server 2008
Hi
I am trying to install Oracle 9i on Windows Server 2008.
While installing third CD it shows the following error message
"jrew.exe has stopped working"
Please guide me what to do next as early as possible.
ThanksWhy?
The general policy of Oracle is very simple:
it certifies against the current version of the OS.
It never re-certifies against new releases of the OS.
Windows 2008 didn't exist when Oracle 9i was released.
Sybrand Bakker
Senior Oracle DBA -
Can we install oracle 10g in windows vista
hi all
i am trying to install oracle 10g in windows vista ultimate ,
but it is not getting install in windows vista
wat is the version i have to use for windows vista ultimate ,
thank in advanceHi,
you can also check certification from http://support.oracle.com ---> certifications.
and read below thread.
http://forums.oracle.com/forums/thread.jspa?threadID=445907&tstart=0 -
Installing oracle 8i on windows me millennium edition
Help!
I'm trying to install oracle 8i on windows me millennium (oracle 8i personnel for windows 98) and it doesn't work. I don't know if it works for oracle 8i personnel for windows NT. I didn't find anything for windows me millennium. Is it possible to install oracle 8i personnel for windows me millennium or no?
Thanks for your help.
nullto read up the Install Guile/Release Notes
shipped w/ the oracle software on the info
about version,platform,prerequire...
[email protected] -
Install Oracle 11g on windows 7 Home Premium?
All,
I'm trying to install Oracle 11g on windows 7 home premium edition? Is there any one installed successfully?>
I'm trying to install Oracle 11g on windows 7 home premium edition? Is there any one installed successfully?
>
Do you have any specific issues with your installation? I don't see why you shouldn't be able to install Oracle 11g on Windows 7. Found a quick blog post for you:
http://mgrvinod.wordpress.com/2011/05/23/oracle11g-r2-on-windows7-home-premium-64bit/ -
Cant install oracle 8i in windows 2003 server
hi,
I am a newbie in Oracle.While Im trying to install Oracle 8i in Windows 2003 server , setup is not running.It didn't show anything.When trying to run from auto run, after splash screen nothing came.I formatted hard disk,changed two more hard disks,.changed machine...but cant install it in no way... It is the same case in Windows XP home edition.
But it is running in one of my friend's machine(windows 2003 server)
Please help me with valuable solutions.
Thanks in advanceDid your friend install on W2003 or upgrade from an older version of the OS?
When trying to run programs on an OS that is not certified for the programs, it is hit-n-miss whether the OS actually has the support files needed for the programs.
Think about this: the Oracle environment needs OS support in the form of DLLs and other files. The contents of the DLLs are made visible as APIs. Each time Microsoft releases patches, it is possible that the APIs that Oracle used are changed. This is extremely true when a new version of the OS is released, and even more true with stripped versions such as XP Home.
If your friend installed and then applied patches, [s]he may have hit the proper API combination. If you appled patches first, you may have skootched your APIs to the point that Oracle can not longer install.
Even if you happen to get it installed, you run the risk of getting clobbered any time you install a new Microsoft patch. The risk is minimized when you use a certified combination of the OS and application. -
Jrew.exe has stopped working when iam trying to install oracle on vista
hi,
iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving itDuplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista
-
DBCA errors while installing Oracle 10g on Windows 7
Hi all,
I'm trying to install Oracle 10g database on Windows 7 operating system. Software is installed without any error. But it gets following exceptions while running dbca from $ORACLE_HOME/bin/ directory...
java.lang.NullPointerException
at oracle.sysman.oii.oiix.OiixPathOps.concatPath(OiixPathOps.java:553)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(
OiicStandardInventorySession.java:426)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:254)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:229)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS
tandardInventorySession.java:178)
at oracle.sysman.emcp.util.OUIInventoryUtil.getInstallInventory(OUIInven
toryUtil.java:117)
at oracle.sysman.emcp.util.OUIInventoryUtil.getAllCentralAgentHomeLoc(OU
IInventoryUtil.java:586)
at oracle.sysman.emcp.util.CentralAgentUtil.getCentralAgentHomeAndURL(Ce
ntralAgentUtil.java:296)
at oracle.sysman.emcp.EMConfig.getCentralAgentHomeAndURL(EMConfig.java:6
16)
at oracle.sysman.assistants.util.OsUtilsBase.enumerateAgents(OsUtilsBase
.java:1638)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.initializePage
(ManagementOptionsPage.java:402)
at oracle.sysman.assistants.util.wizard.WizardPageExt.onSetActive(Wizard
PageExt.java:94)
at oracle.sysman.assistants.dbca.ui.ManagementOptionsPage.onSetActive(Ma
nagementOptionsPage.java:482)
at oracle.sysman.assistants.util.wizard.WizardExt.wizardSelectionChanged
(WizardExt.java:166)
at oracle.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:
237)
at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at oracle.ewt.button.PushButton.activate(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
It might be possible that I'm using wrong installation source for the same. It would be nice if anyone can lemme know which link from http://download.oracle.com to access for Oracle 10g R2 source on Windows 7?
Can anyone pls help me out to solve this query??
Thanks in anticipation.At which point did it occur to you that Windows 7 was developed and released after any version of Oracle 10g and was both uncertified and untested on this platform? ;)
10g will fall off the cliff into desupport in just two weeks. Toss it out and install 11.2.0.1. -
ORA-12154 while installing Oracle 10g on windows 7
Hi,
I am trying to install Oracle 10g express edition on my machine (core 2 duo 2.93) running on Windows 7.
The installation moves on perfectly for the 1st step and while running the 2nd step (Net configuration Assistant), it gives the ORA-12154 error.
The contents of my configuration files at this point are as follows:
Listener.ora
=============
SID_LIST_ORCL =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORCL)
(ORACLE_HOME = F:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
ORCL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
=============
And that of tnsnames.ora is:
=============
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
=============
After some googling around, I have found and installed the Microsoft Loopback adapter too (since my LAN is DHCP enabled) and also tried to turn on the firewall on my machine to check if it is not a problem with the port 1521 being blocked by the firewall.
However, even after all that I still get the error "ORA-12154: TNS:could not resolve the connect identifier specified." while running the Net configuration Assistant and/or running SQL Plus to connect to the SID - ORCL.
I can only see one service running in my services by the name : OracleOraDb10g_home1TNSListenerORCL
Any suggestions or advice on the error would be much welcome.
Is it anything related to Windows 7 ? Because I have managed to install using the same installer on another machine which runs Windows XP and everything seems fine there.
Thanking you all in anticipation.
Shreyasuser12753151 wrote:
Hmmm.. but then I'd have expected some installation error. I have read around that people have managed to install oracle on windows 7.
The error displayed seems to be indicating that there is some configuration or permissions issue.Check that the user has permission to write in the ORACLE_HOME\network\admin - UAC might be blocking that.
Install with software only, and run netca & dbca separately to create the database after the s/w install. (That's the way it is done in production anyway, so get used to it.)
But yes - you still may have problems. Those who did fake it out on Windows 7 usually understand what to do. If you are smart enough to actually do it, my hat is off to you. -
Ora-00604 while installing Oracle 10g on Windows XP SP2
I was installing Oracle 10g on Windows XP but the dbca was failling. So I tried to create a database manually.
But every time I launch this:
"SQL> startup nomount pfile="C:\oracle\product\10.2.0\admin\XP10G\scripts\initXP10G.ora";"
I always had:
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION
I tried to change some memory value in the init*.ora without more success.
So if anyone has been had such issue; he would be an help for me.
Thansks
MUGANGAinitXP10G.ora is a 3 Kbytes file created by OEM and updated by Dos edit program. Here bellow is the contain:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\XP10G\control01.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control02.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=150
processes=100
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\bdump
core_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\cdump
user_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\udump
# Miscellaneous
compatible=10.2.0.1.0
# Job Queues
job_queue_processes=10
# Database Identification
db_domain=""
db_name=XP10G
# SGA Memory
sga_target=177209344
# Processes and Sessions
processes=150
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XP10GXDB)"
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0\admin\XP10G\adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=58720256
shared_pool_size=83886080
nls_territory='SWITZERLAND'
nls_language='FRENCH' -
Not able to install Oracle 10g on Windows Vista Home Premium
Hi All.
I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?hi ,
please follow up the below link,
oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
http://www.psoug.org/reference/vista.html
regards,
Mohammed Mehraj Hussain -
ACL Error when install Oracle 10G on Windows XP
I tried to install Oracle 10G Personal Edition on my Windows XP box. I see the following error in the log file:
INFO: Calling Action w32OcxRegActions10.2.0.0.0 RegisterOCX
OcxPath = C:\oracle\product\10.2.0\db_1\oraconfig\oraconfigps10.dll
WorkingDir = C:\oracle\product\10.2.0\db_1\oraconfig
INFO: Calling Action SpawnActions10.1.0.2.0 Spawn
installcommand = "C:\oracle\product\10.2.0\db_1\oraconfig\ocfgperm" -aa {A1F205B4-4418-11D2-B2F1-00805FC19E2E} set ORA_DBA permit
deinstallcommand = null
WaitForCompletion = true
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: ERROR: Cannot add user to application access ACL.
No mapping between account names and security IDs was done.(534)
INFO: End output from spawned process.
In addition if I try to create a DB later via command line or via the DB Config tool I get all these windows dialogs popping up saying: "Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
Any ideas what might be wrong with my installation?
DavidHi David,
i got the same error on a Windows 2003 Server. At this time no password was set for the Administraor account!.
After setting a password for the Administraor i could install the SW withaout any Problem!
Rudi -
Installing Oracle 9i on Windows 2003 Server R2 Stansard x64 Edition
I'm trying to install Oracle 9i Release 2 (9.2.0.2.1) for 64-Bit Windows on a
Dell Server PE2950
equipped with intel(R) Xeon(R) CPU
E5405 @ 2.00GHz, 2.00GHz,
3.99 GB of RAM (It is planed to upgrade to 12 GB of RAM next week)
Running Windows 2003 Server R2 Standard x64 Edition
on install I receive message :
The image file D:\Disk1\setup.exe is valid, but is for a machine type other than the current machine.
Can you help me?I'm not sure there is a supported version for your O/S but if there is you will find it by going to the downloads page at http://otn.oracle.com.
If there isn't I'd recommend going with a currently supported version of the product rather than one whose full support has ended. -
Install Oracle XE on Windows XP Embedded
Can I install Oracle XE on Windows XP Embedded?
I'm not sure that anyone has tried that before.
Are you going to have enough memory? I think the answer might be along the lines of installing on XP Home... it could be done, but it will take a lot of time and a fair amount of voodoo. It also won't be supported.
~Jer -
Can't install oracle 10g on windows XP(Virtual Box)
Hi all,
I have installed windows XP in Virtual Box, trying to install Oracle 10g in it. It won't start the installation..no clue about it. I installed winrar(as the 10g setup was in rar format, had to extract it).
without any issues winrar got installed, where as Oracle 10g simply wont get installed...no error message is thrown..
in fact I have installed 10g on a XP PC just last week..not sure where what I am missing
i am using "Briged Adapter" Network
If anybody has experienced same issue, kindly let me know....
mohibHi Srini,
Thanks for helping me with the link to be frank I had looked into it long back...
yes the software worked just yesterday, I had installed on XP(different machine).
I added my PC to domain, logged in as Administrator & double clicked, same....no response.
At last I used "command prompt" and it worked!! not sure how or why...but worked.
Now my database is created successfully
Yes would like to know why this happened....and how things worked via command prompt & not by double click....would greatly appreciate if anybody helps me on this.
Maybe you are looking for
-
Storing arrays in a single file!!
Hello all, Is it possible to store two arrays into a single file either separately or together as a POJO. How to accomplish this??..Need some guidance
-
How can I put a passcode on imac ?? ( imac is from 2008)
How can I put a passcode on imac ?? Thank you for your help
-
-
I'm not seeing Numbers in order to update ... ?
Hi! I upgraded to Mavericks a few hours ago, and both keynote and pages updated. However, Numbers has not. I went to the app store and see "19.99" for numbers as opposed to "installed." Any ideas what's going on here ? Thanks!!!
-
Disable content indexing for passive nodes
I have three node DAGs where one node is DR in another site. Have noticed large amounts of traffic on my production network to DR and discovered it was indexing. Is it best practice to disable the indexing service on passive nodes? In the event of D