Trying to install Panther, could not find DVD player

While trying to install panther 10.3 if would get to the end and give the message that there were errors installing the software. I was asked if it would play a dvd and found out it wouldn't. The dvd icon would come up but when i clicked on it there would be a couple of things video and audio. Nothing would work and then I tried to find the DVD player and it wasn't in applications or anywhere else I could think of.
I don't have the original 10.2 disks, just the 10.3 upgrade.
Any ideas?

I replaced the CD with another and it works fine -- I guess its the drive.

Similar Messages

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Font error when trying to run dot: "Could not find/open font : Times-Roman"

I installed the graphviz package from fink. I then tried to build a simple graph using a command from the Graphviz website and I got the following error:
$ echo "digraph G {Hello->World}" | dot -Tpng >hello.png
Error: Could not find/open font : Times-Roman
I don't know much about how graphviz and UNIX fonts are configured, so I don't know how to go about debugging this. The only suggestion Googling turned up was to run fc-cache. I did this, but it didn't change the problem.
Anyone else hit this? Any suggestions for how to get dot working on my machine?
Message was edited by: billmcn

A bit more Googling turns up a workaround.
$ echo "digraph G {Hello->World}" | dot -Tpng -Nfontname="/System/Library/Fonts/Times.dfont" >hello.png
I'm still not sure how to fix the problem.

Could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run when trying to install itunes, could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run when trying to install itunes

I treiws upgrading my itunes to the b=newest version and I got the following error:
"could not write value APSDaemon to \Software\Microsoft\Windows\Current Version\Run. Verrify that you have sufficent access to that key or contact you support personnel"
I then went to that key and changed the permissions on it so that for Everyone - it was Full Controll instead of limited and I also changed the permissions for my administrative account which also didn't have full control. I tried to go back to the Itunes installer but it still wouldn't let me continue the process.
Any help would be much appreciated.
Musicalrabbi2k3

Reinstall the system.

Could not find a Hyperion Reporting and Analysis in workspace

i installed hyperion 9 system them with reporting and essbase ..
after configured all .. configure shows sucess but after shared services configuration failed in BI
unable to open workspace
when i tried to open Workspace
"Could not find a Hyperion Reporting and Analysis in workspace9 server running on server at port 6800. Please verify your server connect string and confirm that the server is up."
Edited by: user1624634 on Mar 10, 2010 12:28 AM

Hello
May i suggest adressing this question to a Hyperion/Essbase forum:, here is the link i am certain you'll get your answer quicker.
Essbase
Thanks

I am trying to install OSX and I get "could not find installation information for this machine" what do it do?

Trying to install OSX and i get "could not find installation information for this machine" what do i do?

someone will be by to edit, in the meantime, NEVER post your serial number.
They wanted you to go to the Hardware section of System Profile and the part that looks like
MACBOOK PRO N,1
Anyone here has Mac Pro of 1,1 thru 6,1
http://www.everymac.com is a good place to look at model specs and history of that model, max RAM and other features.

I get a message of "Could not find installation information for this machine." after trying to Reinstall Mac OS X.

I would like to repartition the Main HD to two Partitions but could not do so and keep on getting an error message of "Could not unmount disc.." so I tried choosing the "Macintosh HD" partition and tried Partitioning it but the option is not available. So to my frustration I tried clicking on "Erase" to see whether doing so would allow me to finally partition my HD but still can't. And now since I erased my Macintosh HD partition I could no longer boot to Lion.
Before doing the above steps I downloaded the Lion Recovery Disc Assistant and created an external Recovery HD using an 8GB flash drive. I used this as startup destination by choosing it as boot destination from pressing Option before startup. I tried using Mac OS X Utilities to Reinstall Mac OS X from the external drive but I only get "Could not find installation information for this machine." message. I also tried booting from the Recovery HD partition on the HD but i also get the same message.
I have a new iMac that came with OS X Lion 10.7.
Anybody have idea how to fix this?

Partitioning on-the-fly may fail if the disk is too fragmented. You cannot run Erase for the internal disk as it contains its system components. The same if trying to run Boot Camp in order to create the Windows partition, it may fail if disk is too fragmented.
If I correctly understand what you want, then you must boot from an external disk, therefore copy Lion to a 4 GB (or higher) flash drive, run the installer, and then choose the option to partition the disk, this is done after rebooting into the installer from the external drive. You cannot do that if the Lion installer is on the internal drive as it cannot erase or repartition itself.
If this fails (did you try this?), then perhaps you can try to create a Lion boot flash or DVD by using a non-Apple app called Lion DiskMaker, when ready restart, after chime press option / alt key, then choose to boot from this newly created boot disk or flash drive. This reportedly works OK (tried with an older version of Lion, not recently, was OK). It is better to work with a flash drive, Lion is not optimized to run from optical media.
WARNING: disregarding the method, you MUST always back up your data when repartitioning or installing / reinstalling.
Hope this helps to solve you issue. Before any attempt, backup, backup, backup.

Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txt

Duplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette.

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Problem installing iTunes. "Could not find key..."

Hi,
I am unable to install iTunes. When I try to install either iTunes or Quicktime, the message "Could not find key......." comes up. I have tried to clear my registry, change permissions and a few other things but none have worked. The only account on my laptop is an administrator account and I have tried runing everything "as administrator".
I am also unwilling to reinstall my OS.
Any help is appreciated.
Regards,
ZeroAlpha

... Drat, one of those. They can be tricky, and I don't have a one-size-fits-all solution for them (it depends on the precise nature of the problem with the key). But the following set of instruction is a good place to start:
http://discussions.apple.com/thread.jspa?threadID=2475687&tstart=30

[Solved]NetworkManager...I can't install it!, could not find or..

Hi, i have a problem!
i hope someone can help me..
im trying to install networkmanager, but when i type "sudo pacman -S gnome-network-manager" i recive this error message: "error: 'gnome-network-manager': could not find or read package"
why? iḿ doing what is here! : http://wiki.archlinux.org/index.php/Net … C3%B1ol%29
thx, and sorry for my english, im from mexico
Last edited by cuacha_ (2010-09-29 04:31:22)

RaisedFist wrote:
have you tried pacman -Ss networkmanager?
also, I think you're looking for network-manager-applet, maybe the wiki is outdated.
i just deleted wicd, i dont really like it, i use networkmanager on ubuntu, openSUSE, sabayon and linux mint to share the internet with mi xbox 360...but i guess is imposible to do it with wicd...hmmm im a noob on arch! xD
i typed that and i recived this:
extra/network-manager-applet 0.8-3
GNOME frontends to NetWorkmanager
extra/networkmanager 0.8-1
Network Management daemon
extra/networkmanager-openconnect 0.8-1
NetworkManager VPN integration for openconnect
extra/networkmanager-openvpn 0.8-1
NetworkManager VPN plugin for OpenVPN
extra/networkmanager-pptp 0.8-1
NetworkManager VPN plugin for pptp
extra/networkmanager-vpnc 0.8-1
NetworkManager VPN plugin for vpnc
community/cnetworkmanager 0.21.1-2
Command Line Interface for NetworkManager
what is it?XD

It says "can not install the driver: could not find media for this driver"

I am havin problem with sound in my Compaq presario V6406TU. When i try to install, it says "can not install the driver: could not find media for this driver", how ever i get a beep for every error message. In my device manager there is no UAA and in services.msc windows audio is started.
I have tried almost everything on net but not able to solve this, plz help.

vendor wrote:
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
Yes My Sound Card is exaclty SB0220. I have downloaded the patch and start it. After that I configured the installer and now I have creative drivers. But are they the best for my sound card? After all I`ve pathed the installer and some sort lied it. If the drivers are for my model, why should I path it's
Yes, I've seen a true SB0220 too on a picture after writing that comment so there is true SB0220 model. But, are you sure your card is SB0220? Did you look the number from a sticker on card board w/ serial number lik MSB022xxxxxxxxxxx where the SB022x is the true model number for your card.
Why you didn't got drivers installed for your card is, because the installer doesn't support the model SB0220 (supported cards are listed in ctcomp.dat -> this is the file ctcomp.exe patches).
IIrc, those drivers are the latest ones for your card. If you like to, you can try soft-mod your card the way, you can use Audigy series drivers (which are a bit newer) -> http://www.tech-pc.co.uk/audigy-2.php (i.e. you just use ctcomp.exe utility to patch the installer for Audigy drivers (use these drivers st - http://www.station-drivers.com/telechargement/creative/%20audigy%205.2.0.042.exe) (newer installer maybe can't be patched w/ ctcomp).
jutapa

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

"Could not find the application that created this file" error when trying to combine files

I am working with a user that is trying to combine a pdf & word doc (docx). When they try to combine the files she gets the error: "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer". The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
Recentley the user was running Acrobat 6, and this error did not occur. It is only after upgrading to Acrobat X that this is happening. Any help with this issue would be appreciated.

This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
Solution: move the files to a shorther path (perhaps the desktop) and try from there.
I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.."

Trying to install Panther, could not find DVD player

Similar Messages

Maybe you are looking for