Trying to install Service Pack 1 from updates

I decided to restore my home computer to the Factory Setting Configurtion. Now when I try to install the Vista Service Pack 1,
it dose not install but it says it did install correctly after it was down loaded. My history says it installed 5 times now but
it has not. I am trying to update Internet Explorer 7 to 9 or higher but I can't get past installing Service Pack 1 which will
not install.I try installing service pack 2 which will not install becauce service pack 1 is not installed. This is a brand new
installation of Vista Home Pre. from Factory Settings Disk 2007. I have install all updates I can install. Then I also look at
Windows updates in my computer and it is not there, thow it shows in History Updates.Please Help MCSE Richard Sedore
Thank You.

For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.

Similar Messages

Problem installing service pack 3 update

I have windows XP up and running on a seperate drive in my Mac Pro. I am now trying to update Windows by installing service pack 3 update via the Windows Update option in the control panel.
I get an error everytime saying there is not enough disk space. My hard drive have 109GB of free space so I don't know what the problem is.
Any ideas?

jperkinski:
Here is a solution for you that should work:
Boot into Windows XP and get to the desktop.
Click on the START Button
Click on RUN
Type Regedit in the windows and click on OK
*Navigate to*
HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
In the right pane, Right-click and select New - String value
Name it as “BootDir” and set its value to “C:\”
Try installing SP3 now and it should work.
Axel F.

Trying to install service pack 2 for WLS 6.0

Hi !
I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
2.2.14-6.1.1smp on an i686
When I try to install the service pack 2 this happens:
===============================================================================
Choose BEA Home Directory
1- /home/bea/wlserver6.0
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.0 not found
WebLogic Server Service Pack 2 Installation failed.
You do not seem to have WebLogic Server 6.0
installed for BEAHOME /home/bea/wlserver6.0.
What is happening?
Thanks in advance
Sergio Ríos

Daryl,
That is really strange...i just tried downloading from the same link and it is working fine for me.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
-Anil

T-500 running Windows Vista - Error trying to install Service Pack 2

I just spent my entire Saturday trying unsuccessfully to install SP2 for Windows Vista on my T-500. My laptop has Vista Home Premium as the OS and is fully patched with SP1.
The message I get is "Error_not_found (0x80070490)" when I try to install SP2
I ran SFC /Scannow and got a message that there are corrupt components and a direction to C:\Windows\Logs\CBS that has a huge file I cannot comprehend.
I also ran the "System Update Readiness Tool" prior to trying to install SP2 with no apparent effect.
I have tried various approaches to this such as running System Restore and reapplying everything with reboots in-between.
I confirmed no spyware and also disabled my antivirus program (NOD) during updates with no effect.
Has anyone else out there had a similar problem who might be able to offer advice?
Thanks,
The Hoy

Are you sure you have the proper file downloaded for your system? x86 if you are running 32bit Vista and x64 if 64bit.
Other than that, you might try to use Windows Update. Note that you need to install all updates, possibly including IE8 before Windows Update will offer you SP2.
You might also try installing all updates from Windows Update and then running your stand alone SP2 installer, to see if that solves the problem.

Trying to instal Service Pack 2 under WLS 6.0

Below you can find my original message posted five days ago.
Just as comment: I don't have a beta version. It is <release level="6.0" Status="installed".
Any help?
Thanks
Sergio Ríos
PS: please don't erase !!!
Hi !
I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
2.2.14-6.1.1smp on an i686
When I try to install the service pack 2 this happens: ===============================================================================
Choose BEA Home Directory -------------------------
1- /home/bea/wlserver6.0
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.0 not found -----------------------------
WebLogic Server Service Pack 2 Installation failed. You do not seem to have WebLogic
Server 6.0 installed for BEAHOME /home/bea/wlserver6.0.
What is happening?
Thanks in advance Sergio Ríos

Hi.
You can get individual service packs by logging into your esupport
account at http://support.bea.com. Alternatively you can download
WLS6.0 with service pack 2 from
http://commerce.bea.com/downloads/weblogic_server.jsp.
Regards,
Michael
Alexandre Portella wrote:
Hi,
From where can I download the sp2 for WLS 6.0 on Solaris?--
Michael Young
Developer Relations Engineer
BEA Support

Errors when trying to install Service Pack 3 for Exchange 2010

I have 2 Exchange 2010 servers that are running SP2 and I am trying to install SP3 on both.
They are installed in a DAG and so I am running the .\StartDAGserverMaintenance.ps1 script before attempting to install SP3. When attempting to run the SP3 setup I get the following errors:
Setup cannot continue with the upgrade because the 'powershell' (Machine: P-E10-2.company.com) process (ID: 5296) has open files. Close the process and restart Setup.
AND
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
I can download the hotfix and apply it but has anyone had any issues with this particular hotfix? Does anyone have any ideas about the powershell error?
thanks for your help.

Hi,
That hotfix relates to a known issue implementing DAG's across data centres (an issue particularly with Windows failover clustering). As a best practice is should always be installed. Please review the following article, which describes why it should be
installed:
http://blogs.technet.com/b/exchange/archive/2011/11/20/recommended-windows-hotfix-for-database-availability-groups-running-windows-server-2008-r2.aspx
In regards to the open files, as the other poster suggested, there will be another user logged onto the server who has a powershell window open. Ensure all other users are logged off the server before performing the upgrade.
Best Regards

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Crystal Reports 2008 Error Installing Service Pack 1

Hello,
I am trying to install Service Pack 1 for Crystal Reports 2008 on Windows 2008 Server as an adminstrator and I get the following error message:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a fold containing the installation package "CrystalReports.msi" in the box below."
Also, I have been unable to complete the registration wizard because I do not get a 10-digit registration number when I complete the registration process at www.sap.com/solutions/sap-crystal-solutions/productregistration . I don't know if this problem might be causing the Service Pack 1 to not install.
Thanks,
Michele

Hi Michele,
Windows 2008 is not officially supported yet but it is for Vista and Windows 7 after SP 2.
To get it to work uninstall first, make sure you keep your keycode and then download SP 3 full build:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
Then it should work.
Thank you
Don

Install service pack 2 in sharepoint medium form

Hi
i have a sharepoint medium form in production environment and i want to apply service pack 2
form has :
2 Application servers
2 Web front end servers
2 Index servers
1 Database server
Servers
Operating System
Configuration Database version
Services Running (check the attached file for details services running in all server)
1 Application Server
Windows server 2008 R2 Enterprise , Service pack 1
14.0.6029.1000
Central administration Service running in this server Only
For other services check the attached file
2<sup>nd</sup> Application Server
Windows server 2008 R2 Enterprise , Service pack 1
In two Web front end servers
Windows server 2008 R2 Enterprise , Service pack 1
Web applications deployed in these servers (these are load balanced servers)
Microsoft SharePoint Foundation Web Application running
Search service is running in these server
In two Index servers
Windows server 2008 R2 Enterprise , Service pack 1
Search service is running in these server
Database server
Windows server 2010 Data center
I want to take advise for from which server I will start install service pack 2
Or before applying service pack 2, Is I need to upgrade operating system if I update can I face any problems ?
adil

           Leaving function Command.this[string key]
03/27/2014 00:13:12 14 INF                    Leaving function Farm.TryIsJoinedToFarm
03/27/2014 00:13:12 14 INF                  Leaving function Farm.IsJoinedToFarm
03/27/2014 00:13:12 14 INF                  The parameter upgradesessionid is chosen, so returning the value as c81cccd6-5e02-4a35-b627-923fb6da03e9
03/27/2014 00:13:12 14 INF                  Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF                    Setting the upgrade mode to inplace
03/27/2014 00:13:12 14 INF                  Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF                  Creating security token service application for this farm ...
03/27/2014 00:13:12 14 INF                  Successfully created security token service application
03/27/2014 00:13:12 14 INF                  Creating service connection point for this farm ...
03/27/2014 00:13:13 14 WRN                  Failed to add the service connection point for this farm
03/27/2014 00:13:13 14 INF                  Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 INF                    Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
03/27/2014 00:13:13 14 INF                    Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection
Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
03/27/2014 00:13:13 14 INF                  Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 WRN                  Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container
exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=test,DC=com doesn't exist in the directory.
   at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
03/27/2014 00:13:15 14 INF                  Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF                    Spawing off the upgrade job
03/27/2014 00:13:15 14 INF                  Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF                  Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF                  Entering function ServiceHelper.TryToStartService
03/27/2014 00:13:15 14 INF                    Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF                    Entering function ServiceHelper.Start
03/27/2014 00:13:15 14 INF                      Trying to start service SPAdminV4 and waiting 180 sec to do so
03/27/2014 00:13:15 14 INF                      service SPAdminV4 is Stopped, will try to start it
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF                      Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:44 14 ERR                      An exception was encountered when trying to start service SPAdminV4
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                        Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                          Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                            Resource id to be retrieved is ExceptionInfo for language
English (United States)
03/27/2014 00:13:44 14 INF                            Resource retrieved id ExceptionInfo is An exception of type
{0} was thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                          Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                        Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR                      An exception of type System.InvalidOperationException was thrown. Additional exception
information: Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
03/27/2014 00:13:44 14 INF                    Leaving function ServiceHelper.Start
03/27/2014 00:13:44 14 ERR                    Failed to start the SPAdminV4 service.
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                        Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                          Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                        Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR                    An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
03/27/2014 00:13:44 14 ERR                    Task upgrade has failed with an unknown exception
03/27/2014 00:13:44 14 ERR                    Exception: System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception:
The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                      Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                        Resource id to be retrieved is ExceptionInfo for language English (United States)
03/27/2014 00:13:44 14 INF                        Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
03/27/2014 00:13:44 14 INF                      Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                        Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                          Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                        Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR                    An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
   at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF                    Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                      Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                        Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                          Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF                        Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF                      Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF                    Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF                    Entering function get CommandCollec
adil

Volume Keys not responding after installing service pack 1.

Okay, I've scoured the internet, and I can't find anyone else with a similar problem or a way to fix it, hopefully ya'll will have an answer:
I recently just updated my Vista Ultimate Operating System (using Bootcamp) to service pack 1. Prior to installing service pack 1, when I pressed F3-F5 on the keyboard, they would respond in the same manner that they would on OS X where F3 would mute, F4 would make the sound lower, and F5 would increase the sound.
However, after Service Pack 1, the buttons do nothing more than mute and turn on the sound. I reinstalled the Boot Camp drivers, ran all the software updates (found no updates on both apple and windows), and tried to repair Vista from the original install disk. Nothing helped.
However, here's the thing: When I press the buttons the same little overlay comes up displaying the sound volume, but there's a big 'denied' circle on the bottom of it. To describe it slightly better, there's a circle with the line through it(looks like a no smoking sign), placed over the squares representing the volume on the overlay to show volume control.
I'm lost as to what to do since all the other keys work, including the brightness control, and they worked before I installed Service Pack 1. Has anyone else had this problem or know how to fix it?

i just uninstalled SP1 and it went back to normal,
go to Control Panel and on the left side theres something called "view installed updates" go there and just uninstall SP1 and your fine. but if you need sp1, i don't know how to help you there.

Fix for continuous reboot after installing Service Pack 3 in Windows XP

After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
Issue: The computer reboots continuously after installing Windows XP service pack 3
Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
Cause:
On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
Symptoms:
Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
Solution:
If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
Step 1: Please try to log on the system in safe mode.
1. While using Safe mode open the command prompt.... Start, All Programs, Accessories, Command Prompt
Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
Step 2:
If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
2. Using recovery console:
If you booted into the recovery console, from a command prompt, type: disable intelppm
Step 3: Please check in registry.
3. Using windows registry:
1. Run regedit
2. Click on HKEY_LOCAL_MACHINE
3. From the File menu, select "Load hive"
4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
5. Name it something you can remember, such as "horked"
6. Navigate to horked\ControlSet001\Services\IntelPPM
7. Double click the Start value and set it to 4
8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
9. Repeat steps 6-8 for the other control sets.
10. Reboot
Reference:
http://support.microsoft.com/kb/888372
Additional information:
Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
For future reference: Service pack 3 Installation steps:
Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
Step 1:
Uninstall service pack 3 from add/remove programs:
1. Click Start.
2. Select Run.
3. Type appwiz.cpl in the run field.
4. Click OK.
5. Click change or remove programs.
6. Select the program -service pack 3 that you want to uninstall or remove.
7. Click Remove button.
8. It will pop up the message stating that "Are you sure you want to remove the programs".
9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
Using Microsoft System Restore in Windows Me and XP:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Step 3:
How to obtain the latest Windows XP service pack :
http://support.microsoft.com/kb/322389/
Steps to take before you install Windows XP Service Pack 3:
http://support.microsoft.com/kb/950717/en-us
I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

Service Packs, Security Updates and Cumulative Updates

I would like to find a document that would help me understand and clarify Service Packs, Security Updates and Cumulative Updates versions and relationships.
Things like. Cumulative Updates include old Security Updates. Cumulative Updates do not overwrite applied Security Updates, etc.
For instance,
I am upgrading a server from: 10.0.5512 (SQL 2008 SP3, After Security Update MS12-70) To: 10.0.5861 (SQL 2008 SP3 CU17).
Would the MS12-70 (2754849) I installed still be present after installing CU17? The reason for doubt was that I saw another version of MS12-70 that includes
CU 1 to 7(KB2716435). So makes me wonder about it.
I am probably not able to explain myself right but, the idea is to find a document that can explain how the build information and versioning works.
Some how I have the idea that Cumulative updates would not include Security Updates.
Thanks beforehand
Paulino

Hi,
Below will give you list of Service packs and Cumulative updates for SQL Server
http://support.microsoft.com/kb/321185
http://sqlserverbuilds.blogspot.co.uk/
Security updates are for Windows not SQL Server. SQL server releases Cumulative updates after that a comprehensive service pack is released which includes all fixes that were done in Cumulative updates.
Cumulative updates fix only a certain type of problem(for which they are created) and should only be applied if facing issue
Service packs are more through and Inclusive and should be applied and contains many fixes and sometimes introduces few features as well. SP are more thoroughly tested as compared to CU For Cumulative
update from Microsoft:
We recommend that you test hotfixes before you deploy them in a production environment.
This cumulative package is intended to correct only the problems that are described in this article. Apply it only to systems that are experiencing these specific problems.
This cumulative update contains all the hotfixes and all the updates that were included with the previous SQL Server 2014 update release.
Windows patch has hardly any relation to SQL server SP and CU.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

How can I open a picture file in PS Elements after installing service pack 2?

Since I installed service pack 2 on my HP computer a week or two ago, the Photoshop "Open" tab no longer appears at the top of my Pictures screen, but rather a "Preview" tab, and I haven't been able to open a picture in Photoshop. Instead, when I double click on a picture, it opens in Windows Picture Gallery. Not long after I installed service pack 2, I also changed my default browser from Internet Explorer to Mozilla Firefox, so I don't know if that has anything to do with it. Thanks...

Reinstall PSE or manualyl adjust your file associations.
Mylenium

Trying to install Service Pack 1 from updates

Similar Messages

Maybe you are looking for