Trying to install SP1 for Exchange 2010 on Win Server 2008 R2. A pre-req is KB982867. It is no where to be found. How to find it?

The SP1 wizard says "Install Hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867
However, that link no longer exists.
How to get this hotfix?
Another post said that the Win 7 hotfix would work. Windows6.1-KB982867-v2-x64 But I can't locate that either.
How to fix?
john11

Hi John,
Exchange 2010 Service Pack 3 is the latest service pack. It is recommended to install it. Service Packs are cumulative, Exchange 2010 SP3 includes all fixes included in previous RUs and service packs. Here is a blog for your reference:
Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Similar Messages

Trying to install Support for DTS packages in SQL server 2008

Hi all
I am trying to follow the instructions in the following link...
technet.microsoft.com/en-us/library/ms143755(v=sql.105).aspx
...to install support for DTS packages - when it says on the Feature Selection page, select Integration Services - none of the installs I have tried show this as an option - what should I be installing in order to see this and get this feature installed?
I just need to be able to view some DTS packages - help!
Thank you! James

Hello James,
as can be read in the article:
Microsoft SQL Server 2008 Service Pack 2 Feature Pack => SQLServer2005_BC.msi (BC
= backward compatibilty).
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to install rollup4 for Exchange 2010 SP3

Hi,
I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
I know that this process will take some time to complete but I have waited 10 hours.
I've tried to reboot the server and restart the setup.
Exchange is functioning perfectly otherwise.
Any help would be greatly appreciated :)
/Søren Emig

Hi,
I recommend you check if the anti-virus has been disabled before you start the upgrade process.
If you didn't ,the update could fail or take an extended amount of time.
Also, disable all other third-party apps/plugins that might be installed (like backup agents).
In addition,the following articles for your reference:
Install the Latest Update Rollup for Exchange 2010
When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
The installation takes a long time to complete.
You receive the following message during the installation: Creating native images for .Net assemblies
When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
To work around this issue and to reduce installation times, turn off the
Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Advanced tab, and then locate the Security section.
Clear the Check for publisher’s certificate revocation check box, and then click
OK.
After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
Generating NGEN images takes longer than expected
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Cannot install Exchange 2010 on Win Server 2k8R2

I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
Unable to access the 'Default Web Site' on this computer.
I have checked in Server Manager and IIS is definitely installed.
I opened the IIS Manager, and from there I *can* browse to the Default Web site.
For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
Any help is greatly appreciated.
Thanks
James.

Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing...
Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
Set-Service NetTcpPortSharing -StartupType Automatic
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
Exchange 2010 RC: Quick Installation Guide
http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
Thanks a lot!
I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
Ruud van Strijp
Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

Problem Installing EM Cloud control 12c in Win Server 2008

Hi All,
I having problem installing the EM in win server 2008 64bits. I already installed java run time but when i click on the setup.exe in the disk 1 after unzip it does not show the installation wizard and any error message. Did i miss out something? do i need to create the user group and user as stated in the installation guide as stated in this link Installing Enterprise Manager System - 12c Release 1 (12.1.0.1)?

Hi, can you open an SR for this issue and share the number. Lets check few basic things:
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder ?
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install      libskgxn      plugins     response     stage     WT.zip
jdk     oms     runInstaller      wls
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM   ( for windows it will be orInstaller.err and log )
You donot need any user group or any thing created.

ECP Page not loading after installing SP3 on Exchange 2010 CAS&HUB Server

I have installed SP3 on my Exchange CAS Server after that OWA was not working, hence I have reset owa, ecp,ews,oab, autodiscover & active sync virtual directory from EMC. After that OWA is started working.
But While accessing ECP , content is not loading properly. I have reset virtual directory of ecp 2 times but problem is still same.
Kashi

Did you tested different browser?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange 2010 on windows server 2008 r2 (VMware Virtual Machine)

Hello All,
I am trying to get an exchange 2010 test environment running.
This is a virtual deployment on windows server 2008 r2 sp1 and the actual exchange install passes the initial requisite checks, during the install it however fails on creating a hub transport tole with the following messages in the setup log.
[ERROR] An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
[1] The following 1 error(s) occurred during task execution:
[1] 0. ErrorRecord: An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
[1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
[1] [ERROR] The following error was generated when "$error.Clear();
install-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.".
[1] [ERROR] An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
[1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[1] Setup is stopping now because of one or more critical errors.
Any of you exchange gurus out there seen this before?
Any help is much appreciated.
Regards

Hi ,
I tried a Exchange 2007 SP3 install (over Windows 2008 R2 too) with the same error code message: "Error code
3221685951. Remote procedure call"
It occurs to me:
1-The Schema master is in another site.
2-There are two ISA Servers in between but I shut down the feature "Strict RPC compliance."
Beyond that, I really don't know what to do.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Installing Powerpivot for Sharepoint 2013 with SQL Server 2008 R2

Hi,
We are currently setting up a Sharepoint 2013 Enterprise farm with the backend database server being SQL Server 2008 R2 SP2 - my question is can you install Powerpivot for Sharepoint 2013 in this configuration and if so what are the steps?
Thanks in advance!

Here is Microsoft's documentation to Configure Power Pivot for SharePoint 2013
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

How to do the hard recovery for exchange 2010 (No Restore.env generated)

enrollment:Windows server 2008 R2, exchange 2010.
I want to test the fundamentally of eseutil /cc
so I backup the exchange database by Using the Windows backup, then I restore the database, and no Restore.env be found.But I found I can run the
eseutil /r.
what's happened?
1,why No Restore.env generated for exchange 2010 in Windows server 2008 r2?
2,why I can do the soft recovery after the restoring the database?
3, how to do the hard recovery for this situation(No Restore.env )?
Please click the Mark as Answer button if a post solves your problem!

Hi Eric,
From your description, I would like to clarify the following things:
1. Before performing the restore process, we need to dismount the Exchange databases that we want to restore. If the database is still mounted, the restore process will fail. If the restore process doesn't succeed, Restore.env won't be generated.
2. It is because the log files are healthy, you can run Eseutil/r and perform soft recovery.
3. In your case, you can continue to perform the soft recovery.
For more information about hard recovery and soft recovery, here are some helpful threads for your reference.
Exchange Server Soft and Hard Recovery
http://technet.microsoft.com/en-us/library/aa996168(v=exchg.65).aspx
Exchange Database Recovery – Using eseutil commands (Note: It isn't from Microsoft, please pay attention to refer to it.)
http://msexchangeguru.com/2009/07/12/exchange-database-recovery-using-eseutil-commands/
Hope it helps.
If there any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support
" If the restore process doesn't succeed, Restore.env won't be generated. "
thank you for you reply.The restore process succeed,otherwise I can't do the soft recovery after the restoring the database,but can't see the restore.env
Please click the Mark as Answer button if a post solves your problem!

Installing SP3 on Exchange 2010 - Error

Hi,
I'm getting an error message when trying to install SP3 on Exchange 2010.
I am currently running: Exchange 2010 SP1 - Windows Server 2008 Ent. 2 nodes, DAG
"The server side error is: 0x21a2 The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner."
So I ran dcdiag, and sure enough I get a replication error, several of them actually:
"The failure occurred at 2014-02-11 13:54:23.
            The last success occurred at 2013-05-30 00:51:00.
            32 failures have occurred since the last success.
         [Replications Check,EXCHANGE2010] A recent replication attempt failed:
            From EXCHANGE2010-2 to EXCHANGE2010
            Naming Context: CN=Schema,CN=Configuration,DC=mydomainname,DC=lcl
            The replication generated an error (8614):
            The directory service cannot replicate with this server because the time since the last replication with thi
s server has exceeded the tombstone lifetime."
The thing I'm not understanding is this: When I check the EMC looking at the DAG tab, it looks as though everything with the DAG is fine. Also, when I check the Organization Config->Mailbox, both copies of the Database seem to be Healthy.
So, I guess what I'm asking is what can be causing this error message and what steps can I take to try to fix it? I'm not an expert at this, which I guess is clear since I'm posting here!
Thanks,
mike

Thanks DarDevil,
Before you replied I came across an article that suggested I could force a replication.
So I ran the command they listed: ‘repadmin /syncall /AeD
It seemed to have worked, as I am now able to install SP3, which was the thing I was trying to do all along. I'm testing SP3 on this test system before I install on production.
Any particular reason not to run the force replication command above? Before running the command, I put in a registry key that would allow it according to another article I read. I have since removed the key.
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Allow Replication With Divergent and Corrupt Partner
Thanks!

How to test if Spam protection with Forefront for Exchange 2010 works

Hi there.
Installed forefront for exchange 2010 on Exchange Edge server.
We have tested virus protection with creating EICAR, but the question is, is there a way to check if SPAM Works fine, and how to?
with best regards
bostjanc

Hi bostjanc,
Since this is an issue on the Forefront side, I suggest ask Forefront Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FOPE
However, based on my knowledge, use the EICAR antivirus test file is the only built-in method to check whether the Anti-Spam configured correctly.
You can try to send some test spams to your Exchange server for testing, even if this is a stupid method : )
Thanks
Mavis Huang
TechNet Community Support

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

Error 1603 when installing Rollup 4 for Exchange 2010 SP2

Hi There,
I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems. However I have hit a problem with my 4th server.
I am receiving the 'common' error 1603 in my Application log and I have already ran through many potential fixes to this problem on various posts on this and other forums, but to no avail.
I have tried the following without success:
Turning off UAC
Running from elevated CMD prompt
Running from elevated Powershell command
Removing and re-adding "Exchange Trusted Subsystem" from the Administrators group
Re-downloading the RU4 install package to the local disk on the server
Adding more RAM and CPU resources
I have watched the installation process and it seems to update of the native assembly files and comes to the "Starting Services" process, with which it appears to do fine as I have watched the Services starting within Server Manager while this has been running,
but then all of a sudden just begins "Rolling back actions".
The only difference with this server to the others is the fact that a colleague of mine had to recover this server within the last 6 months and ran the Setup /m:RecoverServer command
to do so, could this have anything to do with it?
I have installed Exchange 2010 Service Pack 2 on this server since the recovery though.
I am running out of ideas so any help would be greatly appreciated.

skippy-85,
Any updates on this Issues?
In case if the issue stands
resolved, Please mark Solution for this Thread and close this.
In case if you still have
the issue with the RU4 installation do let us know!
Thanks
Exchangeexperts.in ~ ( Exchange | 2003/2007/2010/E15(2013)) ~Mark this if Helpful~ This Information is provided "AS IS" and confers no Rights!!

Installing Error in SP1 for SharePoint 2010

hi
i took a backup of share point site from staging server and tried to restore it on production server but when i get the following error.
SP1 for share point 2010 was installed on the staging server so downloaded a ubersrv2010-kb2775353-fullfile-x64-glb.exe for SP1 now when i installing it i am getting the follwoing error
please help why it's not getting installed

http://social.technet.microsoft.com/Forums/office/en-US/86c19106-e477-457a-bd67-5aa2e74bfcfa/sharepoint-2010-sp1-installation?forum=sharepointadminprevious
SharePoint 2010
Language Pack SharePoint Foundation 2010
Language Pack SharePoint Server 2010
Microsoft SharePoint Foundation 2010 SP1
Microsoft SharePoint Foundation 2010 Language Pack SP1
Microsoft SharePoint Server 2010 SP1
Microsoft 2010 Server Language Pack SP1
If you dont have WebApps you dont need to install SP1 for WebApps.
http://www.msdnques.info/135037/sharepoint-2010-sp1-installation/
If this helped you resolve your issue, please mark it Answered

Trying to install SP1 for Exchange 2010 on Win Server 2008 R2. A pre-req is KB982867. It is no where to be found. How to find it?

Similar Messages

Maybe you are looking for