Trying to install SQL 2012 Std on Win 8.1Pro - Fails right away with no log

When trying to install MSDN SQL 2012 Std 64 or x86 on Windows Pro 8.1, i get an error immediately with no information posted to the summary log. Screen shot of error. Just Modal dialog with "SQL Server Setup" and a Big red X in it.
Any help would be appreciated.
-jeff

Hello,
Please enable .NET Framework 3.5 using Control Panel -> Programs and Features. If you have it already enabled, please repair it using
the following tool:
http://www.microsoft.com/en-us/download/details.aspx?id=30135
Open the Command Prompt as Administrator and run the following command:
winmgmt /verifyrepository
The result of the command should be “WMI Repository is consistent”.
SQL Server cannot be installed on a compressed or encrypted drive.
You need to run SQL Server setup with a Windows account with administrative privileges.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to install SQL 2012 Enterprise on Windows 8.1 OS

I had installed SQL 2012 Enterprise on my Windows 8.1 and was running successfully. I faced some SSRS & SSIS Authentication issue. So i decided to uninstall SQL and re-install it. On doing so, i am unable to install it.
Wizard disappears from this screenshot onwards.
Tried installing from Command Prompt.
Setup.exe /q /ACTION=Repair /INSTANCENAME=instancename /IAcceptSqlserverLicenseTerms=true
Still wizard disappears.

Hello,
I guess un-installation of SQL server is not complete and there are fragments remaining.Have you made sure you have uninstalled SQL server from add remove program completely.Make sure no features related to SQL server are present there.Please remove setup
support files as well.Refer below link to remove it completely
http://technet.microsoft.com/en-us/library/hh231731.aspx
Similar issue docemented here
If you face any issue below manual method for removing SQL server will be helpful
1. Uninstall the existing SQL Server 2012 and all the components from the control panel.
    2. Backup the registry.
    3. Delete the following keys in regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    6. Rename all the SQL Server folders in the computer.
    7. Reboot the machine.
Revert if you face any issue.
EDIT: IMP POINT installation of SQL server 2012 Enterprise edition On win 8.1 ( client OS machine) is not supported by MS.But it will not stop you from installation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?

What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache

Trying to install Adobe Photodeluxe (elements 13) I have box and cd sleeve with serial number, But registration won't let me type letters only numbers allowed. Help please.

Trying to install Adobe Photodeluxe (elements 13) I have box and cd sleeve with serial number, But registration won't let me type letters only numbers allowed. Help please.

You possibly have a redemption code which has to be converted into a serial number.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html

Trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

HI Bill,
Did you set Internet Explorer as the default browser? If not the set it as the default. Check to see if you can do custom install
Thanks
Scott
Here is the system req.
Photoshop Elements 6.0
Windows
Intel Pentium 4, Pentium M, or Intel Centrino 1.3 GHz (or compatible) processor
Microsoft Windows XP with Service Pack 2 or Windows Vista
256 MB of RAM (512 MB recommended)
1.5 GB of available hard-disk space
Color monitor with 16-bit color video card
1024 x 768 monitor resolution at 96 dpi or less
Microsoft DirectX 9 compatible display driver
CD-ROM drive
Web features require Microsoft Internet Explorer 6, Netscape Navigator 7.0, or Mozilla Firefox 1.5
Languages

Trying to install PSE13 from DVD. Stops when ask to sign in with Adobe ID

Trying to install PSE13 from DVD. Stops when ask to sign in with Adobe ID. How do I get by this?

I am having the same issue. I have contacted Adobe multiple times and keep getting the same answers."We are working on it and should have a answer in 1-2 days." I've been doing this for almost 2 weeks now. Have you gotten any answers yet?

Trying to install lightroom on desktop. Message says Installation Failed. I had no problem installing this on my laptop

Trying to install lightroom on desktop. Message says Installation Failed. I had no problem installing this on my laptop

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

When trying to install Mountain Lion I get an error message, Failed, recovery can't be created

My Mountain Lion install failed for the following reason:
OS X can't be installed on the disk Macintosh HD, because a recovery system can't be created.
The message went on:
Visit www.apple.com/support/no-recovery to learn more.
The page is about a different failure, but I'm assuming the reason for my failure is this one:
The disk has a non-standard Boot Camp partition setup, in which further partitioning was performed after running Boot Camp Assistant, or the configuration that Boot Camp Assistant created was manually modified.
The cure involves erasing the entire HD and starting from scratch, which in my case would involve backing up both the Mac and Windows sides, setting up Boot Camp again, reinstalling Windows XP and recovering everything from backups on both sides. I would rather not have Mountain Lion than go through all that, and I think it's unfair for Apple to expect me to.
Because I don't recall doing anything off-piste when I set up Boot Camp in the first place (for a start, I'm not clever enough), I consider this episode an inadequacy in the Mountain Lion installer. As I won't be using the download, is it possible to get my money back?

WSUS 3.2 on Server 2008 R2 with SQL 2012 STD

Hi
I have a Windows 2008 Server R2 with SQL server 2012 STD on it, his is a VM(hyper v) and not connected to the internet machine.
I want to install the WSUS Role on it an it fails every time..
When installing the Role it fails with this error:
"he update could not be found. there may be a network connection issue."
I tried installing it using the installation .exe from Microsoft website
and also faild with this message:
"Windows server upate services 3.0 sp2 setup cannot continue. please resolve the following issues, and the run the setup again.Internet Information Services (IIS) or additional IIS role service
must be installed.
please refer to windows server update services 3.0 sp2 release notes for more information about prerequisites"
I must point that IIS IS INSTALLED and running on this server.
Does anyone knows how to solve this problem?
Thank you!!

I want to install the WSUS Role on it an it fails every time..
While not directly related to your situation, it's important to note that SQL2012 is
not a supported platform for WSUS v3.2. Be sure to install with the Windows Internal Database instead.
When installing the Role it fails with this error:
"The update could not be found. there may be a network connection issue."
The key here is in understanding HOW the WSUS role gets installed on a Server 2008 R2 system. The binaries used to install the role are NOT present on the OS image, they must be either downloaded from the Internet or obtained from another WSUS server with
the Dynamic Installer approved.
My guess would be that this system does not have Internet access. If you don't have another operational WSUS server, then this system will need to have Internet access to download the required binaries from MU, or else you'll need to download the standalone
installer and install it manually.
I tried installing it using the installation .exe from Microsoft website and also faild with this message:
"Windows server upate services 3.0 sp2 setup cannot continue. please resolve the following issues, and the run the setup again. Internet Information Services (IIS)
or additional IIS role service must be installed.
I must point that IIS IS INSTALLED and running on this server.
Ahhh.. was it previously installed for some other application. Have you *verified* that it is installed in a configuration that is compatible with WSUS?
HINT: WSUS is, fundamentally, an IIS6/ASP.NET v2 application. My first guess would be that your existing installation of IIS7.5 does not have the IIS6 components enabled.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Trouble installing SQL 2012 CU7 on an AlwaysOn environment

Windows Server 2012 R2 Datacenter
SQL server 2012 Developer (64 bit)
Failover Cluster
AlwaysOn Availability Group running
Trying to install CU7 for SQL 2012 and get the following error:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Error details:
§ Error installing SQL Server Database Engine Services Instance Features
There was an error to lookup cluster resource types. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 4154. Description: Invalid object path.
Error code: 0x86D80018
Visit http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3393.0&EvtType=0xE8049925%400x42B4DED7&EvtType=0xE8049925%400x42B4DED7 to get help
on troubleshooting.
Has anyone run across this issue?

It doesn't appear to be what's happening here.  Below is the output from "ClusterResourceType":
PS C:\Windows\system32> Get-ClusterResourceType
Name                                                     DisplayName
DFS Replicated Folder                              DFS Replicated Folder
DHCP Service                                          DHCP
Service
Disjoint IPv4 Address                               Disjoint IPv4 Address
Disjoint IPv6 Address                               Disjoint IPv6 Address
Distributed File System                            Distributed File System
Distributed Network Name                        Distributed Network Name
Distributed Transaction Coordinator           Distributed Transaction Coordinator
File Server                                               File
Server
File Share Witness                                    File Share Quorum Witness
Generic Application                                   Generic Application
Generic Script
Generic Script
Generic Service                                         Generic
Service
IP Address
IP Address
IPv6 Address
IPv6 Address
IPv6 Tunnel Address                                  IPv6 Tunnel Address
iSCSI Target Server                                   iSCSI Target Server
Microsoft iSNS
iSNS Cluster Resource
Nat
Network Address Translator
Network File System                                  Network File System
Network Name
Network Name
Physical Disk
Physical Disk
Provider Address                                       Hyper-V Network
Virtualization Provider Address
RAM Disk (SuperSpeed LLC)                       RAM Disk (SuperSpeed LLC)
Scale Out File Server                                  Scale Out File Server
SQL Server Availability Group                      SQL Server Availability Group
SQL Server FILESTREAM Share                   SQL Server FILESTREAM Share
Storage Pool
Storage Pool
Task Scheduler                                           Task
Scheduler
Virtual Machine                                           Virtual
Machine
Virtual Machine Configuration                       Virtual Machine Configuration
Virtual Machine Replication Broker                Virtual Machine Replication Broker
WINS Service                                              WINS
Service
Thanks,
Darren.

Full-text search not available after upgrade from SQL 2008 R2 Std to SQL 2012 Std

We upgraded our production SQL Server from 2008 R2 Std to 2012 Std last week, and the installation logs show everything was successful, but now we are unable to do any searches against our full-text indexes. The resulting error is as follows:
"Full-Text Search is not installed, or a full-text component cannot be loaded."
When executing the query "SELECT FULLTEXTSERVICEPROPERTY('ISFULLTEXTINSTALLED')", the result is "0". The "Full-Text Daemon Launcher service is also running. When running installation again to add the feature, it shows
"Full-Text and Semantic Extractions for Search" as being installed and unavailable for selection in the list of features to add. As a side note, we did the same upgrade in our identical QA environment before production and everything was successful
and full-text searches are working correctly. We have run the "Repair" routine in the SQL Installation Center and it did not correct the problem.
The full-text catalogs still appear when browsing through the GUI in SSMS or querying sys.fulltext_indexes and sys.fulltext_index_columns. It is not possible to view the properties of the catalog in SSMS, though, as the GUI throws an error and an empty
dialog box is shown. Any other thoughts?
Thanks,
AJ

I have no idea what is going, but assuming that it is a little pressing to get this fix, I think the best path in this case is to open a case with Microsoft.
Erland Sommarskog, SQL Server MVP, [email protected]

Installing SQL 2012 SP2 - The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
I am trying to install the SQL 2012 SP2 in one of the servers. I am getting the error as :
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Error code 0x84B10001.
The same setup is working in other servers, but on a particular server I am getting this error.
Server configuration: Windows server 2008 r2 standard edition, servvice pack 1 , 64 bit OS
How to fix this?
Thanks

Hi Venkatzeus,
Based on my research, the issue is caused by that some .dll files are corrupt or missing during the installing of SQL Server 2012 SP2.
In order to troubleshoot this issue, please view the detail error message in SQL Server Setup Log Files. We can read the Summary text under %programfiles%\Microsoft SQL Server\110\Setup Bootstrap\Log\, and the Detail text in the place %programfiles%\Microsoft
SQL Server\110\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt. For more details, please see:
View and Read SQL Server Setup Log Files
Besides, here are some similar issues for your references:
https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Trying to install SQL 2012 Std on Win 8.1Pro - Fails right away with no log

Similar Messages

Maybe you are looking for