Trying to install windows on Mac using bootcamp, but windows won't install?
I've been working tirelessly on installing a burned to disk windows 7 on my MacBook Pro using bootcamp. Everything worked fine, I booted up windows but the problem was that it wouldn't install at all and just told me that the disk may be corrupted or missing? I noticed the disk was scratched so I reburned it to another disk. When I went to restart the Mac to boot up windows and try the installation again, a message came up saying: "NTFS - 3G could not mount /dev/disk0s4 at /volumes/untitled because the following problem occurred: dyld: library not loaded/ usr /local/libfuse.2dylib referenced from: /usr/local/bin/ntfs-3g reason: image not found." Could this be saying something about the disk? Is there an easy way to just install the **** thing?? In really tired with this, thank you do much for any help.
The Boot Camp Installation Guides are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Group is located here: https://discussions.apple.com/community/windows_software/boot_camp
Similar Messages
-
I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem
Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck. -
I was wondering if I can move the program files from my PC and re install on the mac using bootcamp, my pc has windows vista if BootCamp can run that.
Thankyou for answering my question, I have another one if you can please answer it. If when I have my macbook, and I put windows 7 on it, can I transfer files from my pc (which again is vista) onto wondows 7 on my mac?
-
I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks
Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden -
I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files. I am stumped.
If you have the original movie files, you'd be much better converting those, otherwise try MPEGstreamclip.
-
Im trying to restore my Iphone 4S using Itunes but get "unknown error -1 " Does anyone have a solution?
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service. -
I deleted/uninstalled iMessage on my Mac (using iTuneUp) but now I want it back. How can I do that? I have OS X Yosemite. Please help.
Hello ac4320a,
Thanks for using Apple Support Communities.
To reinstall any application which came with your Mac, you will need to reinstall OS X.
OS X Yosemite: Reinstall OS X
Have a good one,
Alex H. -
Ive tried to update my iphone by using wifi but the wifi connection got interupted and not my iphone wont work
Connect your iPhone to a computer and use iTunes to perform the update.
~Lyssa -
When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone? I don't really need a paper weight.
No not jailbroken. After the update which took about 45 minutes. The phone went black. Dead. Wouldn't restart. Using the new itunes I tried to restore it. It went through the motions; the white Apple and progress bar appeared on the iphone screen. Then I got a message "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes." Then the phone went completly dead again. I Repeated the process and got the same results. Is there another way to restore the phone if it's dead, besides itunes?
-
My lad is trying to set up iTunes on his computer but it won't let him. He just been given an iPhone 3 and needs updating
Hello Derrick,
If you needs to update your iPhone, check out the following article that will assist with updating your iPhone with iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I often use credit card for iTunes but also use iTunes but systems won't let me change back to my iTunes. I have redeemed and gives me a balance but I am unable to access.
If you can't find anything for exactly that amount then you can try contacting iTunes support and see if they will remove the balance for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I tried to install windows 7 using bootcamp, i did every steps, when the installation of the windows started i selected the partition created by bootcamp but it didn't install because it said that maybe something was corrupted, then i quit the installation but now my mac doesn't start up, the screen gets black and it says: no bootable device -- insert boot disk and press any key.
I try to press alt/option when it starts but nothing occurs. I don't know what is going on, i really need to use it urgently, i hope i won't loose my data. Well i hope someone could help me!!Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013. -
I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.
Go back to Boot Camp: on the 2nd page you get this:
Download the support software and as Windows is already installed uncheck the 2nd box. -
NEED HELP: Deleted windows from bootcamp but comp. won't boot into mac OS!!
Here is my problem -
I tried to install windows with bootcamp and couldn't get it to work because I had no valid product key for windows. So I deleted the windows partition to remove it from my mac. However, when I boot up the computer it goes to a black screen and tries to boot from a cd instead of just booting directly into leopard.
If I hold down the option key when I turn on the computer it bypasses that black screen and allows me to select the hard drive for leopard - then everything works as normal.
So my question is - how can I stop my laptop from trying to load from the cd and just boot directly into leopard when I turn on the computer like it used to.
Please help me - thank.
AdamFound the answer see following post -
http://discussions.apple.com/message.jspa?messageID=6592744#6592744
Maybe you are looking for
-
Unable to run a report with chart
I have report rel.6 NT version installed on Windows 2000.Now I want to run my report with a chart.But after I finished the chart wizard and try to run it,it gives me error.The error says that it is unable to create a PL/SQL Development Environment co
-
Camera quality get worst after unlock bootloader
Hi, I unlocked bootloader on my z2, after that I realize the Xreality mode not working, also the camera quality got worst. Is there a way to go back? I tried relocking the bootloader but got no luck. I may not need the xreality, but I really want the
-
Joins b/w Vendors from Suppliers tables and Territory (jtf) tables R12
Hi, I m trying to get the details of vendors using ap_suppliers & ap_supplier_sites_all. once i get vendor details, I should see if these vendors exist in Territory tables ( jtf_terr_rsc_all jtf_terr_qual_all jtf_terr_values_all jtf_terr_all) Coul
-
Hi Folks - I have a table of students and a table of student test scores. I want to create a query that lists students that do not have a score. Do-able? Michael
-
~ORA-16038: log 2 sequence# 140 cannot be archived~ORA-19809: limit exceede
~ORA-16038: log 2 sequence# 140 cannot be archived~ORA-19809: limit exceeded for recovery files~ORA-00312: online log 2 thread 1: '/u02/oradata/PROD/redo02.log' but my /u02/oradata/PROD/ is empty, mod is set to 777 What possible happened? Thanks.