Trying to install wireless usb card

I put in the driver disc and click on the right file then the box comes up and shows waiting for disc copy help and nothing else happens. what am I doing wrong? is it the wrong software?
Thanks
Robert

I would recommend maximizing the RAM with a 512 MB module in the one user-accessible RAM slot.
http://eshop.macsales.com/item/Other%20World%20Computing/100SO512328L/
Instructions for installing it can be found in this Apple Knowledge Base article:
http://docs.info.apple.com/article.html?artnum=111918
If you have the original install and restore CDs that came with it, and they include Mac OS X 10.2, you could get by with a 10.3 upgrade CD. This would be a little bit cheaper than the full install CDs, but if you ever had to install the system again, you would have to install Mac OS X 10.2 first, whereas with the Mac OS X 10.3 (Panther) full retail install set, you wouldn't have to take that extra step of installing Mac OS X 10.2 before upgrading again to 10.3.
http://hardcoremac.stores.yahoo.net/macosx10pare.html
http://hardcoremac.stores.yahoo.net/macosx10paup.html
The original AirPort Card will work with the iBook as-is (with Mac OS X 10.2).
Possible sources for the original AirPort Card:
http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
http://store.airportcardsdirect.com/
http://eshop.macsales.com/item/Apple/M7600LLE/
http://www.megamacs.com/v1/?action=view&pid=967052
Instructions for installing the original AirPort Card can be found here:
http://docs.info.apple.com/article.html?artnum=111919

Similar Messages

M72z - trying to install Wireless-N 2230 :/

Hi,
I'm trying to install Wireless-N 2230 in M72z but when i plug it inn and start the machine I get a communicat:
Error 1802: unauthorised network card plugged in - Power off and remove the network card.
Well - I thought that if I buy a card that is listed in Lenovo PSREF it will work :/
Seems I have to buy a part with CRU number. You know a source to find it?
Cheers
Edit: I just learned that this part has to be ordered via Lenovo service and mounted by Lenovo service - it has no CRU (Customer repleacable unit) - only FRU (Field repleacable unit - only trained service).
Topic to be closed.

Hi hdkimball,
How about trying to get into the setup page of your WRT160N v2? Launch your internet explorer or other browsers then you type in 192.168.1.1. Leave username blank and password in small letters admin. Here are the links on how to reconfigure your router.
Setting Up a Router with Cable Internet Service
Setting up a Linksys router for DSL Internet connection

I AM TRYING TO INSTALL A USB MODEM ON A MACBOOK PRO RUNNINGLION AND IT KEEPS TELLING ME I NEED ADMINISTRATIVE PRIVILAGES I AM LOGGED IN AS ADMINISTRATOR ANY IDEAS

i am trying to install a usb modem and it wont let me inslall the software it says i need to be the administrator i am logged in as admin on my mac any ideas

You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
Thomas Cannon Jr.

Sierra Wireless USB card will not connect

I have purchased a Sierra Wireless USB card (AT&T USB Connect 881) to use with a iBook G4. The green power lites are solid green. However, I can not get a signal from AT&T. No one has been able to help solve this problem. I am ready to return it to AT&T for a refund.

Thx for ur reply. I just checked the model of the USB adapter is Belkin Basic N150.
The xp is able to see and identify the iphone wireless network and shows it in available networks with full signal strength. Once I click on connect then an alert message says that it is detecting network type pls wait. Then another message appears stating that "selected network may be no longer in range. Pls refresh the list and connect again"
As suggested by you I will try it on windows 7.

Multiple PC's & one Sierra Wireless USB Card

? Can I use the one Next G Sierra Wireless USB card on my desktop PC and then take it away for use on the laptop when travelling. It asks me to "register" it when I plugged it into the laptop but it was registered to my PC. I do not want to sign up for another USB wireless device.

Hey Rowan, If you have the 'activation has not been completed' message follow these steps to resolve- - While holding shift, press the option button (the cogs)- a tab will become available called 'diagnosis'-click this tab and find the tick box that says "sign up has been completed for this device"-check the box and click apply and then OK.-hit the connect button and you should be away. The only additional thing you may need to do if its a bigpond service is input your bigpond email address and password into the account tab in the same options area to get it to connect properly. apart from that there shouldnt be a problem. Hope that helps

Help please - error message while installing mobi usb card modem

Hello,
I keep getting an error message while trying to install a mobi usb card modem onto my g4. The message is "error encountered while running the installationcheck tool".
I've never seen this message before, can't find any info about it. I'd really appreciate any help, we don't have any mac support where I live (and mobi have no idea).
Thanks!

Yzmina,
Make sure your USB card is compatible with the Mac and also, connect a USB device to see if the card is working.
You don't say what kind of Mac you have, but didn't most G4s have an internal modem.
What software are you trying to install - Macs usually don't need third party software for USB cards.
A little more information will help people solve your problem.

Trying to install a grapgics card on a p7-1267c

Hello
I'm trying to install a nivida geforce gtx 650 to my p7-1267c, i have upgraded the power supply and tried to update the bios, but the system still shows the old bios. I cannot get beyond the hp start up screen with the card installed. without the card in the computer boots up just fine. Any advise or trouble shooting that i can do? do i need a new motherboard?

According to specs, the GTX650 series cards require a minimum of a 400W PSU, and a PCIE 6pin power plug.
What PSU did you install? Is your BIOS UEFI? Is the card UEFI compliant?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Error Message access denied when trying to install on SD Card

Hi,
I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
ive1 /SkipPlatformCheck
Access is denied.
Does anybody know a solution?

Are you able to see the SD card in file explorer? When you performed the diskpart command sequence:
diskpart
list disk
exit
Did your SD card show up as physicaldrive1?
Is the SD card either 8 or 16 GB in size and Class 10?
Also, are you running this command on a Windows 10 install?
You might check that explorer or cmd don't have a reference to the SD card still. If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

MS-6714 trying to install new video card

Well, I have done everything I can think of short of sledgehammering my computer into oblivion. Just bought this comp it is a 2.8 celeron using the 6714. Thought I could just stick a new video card in. It recogzines the video card, but will not use it. Even when I disable the on board through the device manager. It just uses generic vga drivers. Any clue how I can get this card to be used?

Hi,
Which 6714 are you using???
Check link:
http://www.msi.com.tw/program/search/ser/SerConProRes.php?keyword=6714&kind=1
Also,
1)have you disabled the ONBOARD graphics in the BIOS???
2)which video card you trying to install and which version of drivers?
3)what PSU do you have and model number?
Every single piece of info you give, shortens the answer/solution time...
Del

When i connect ipod classic it crashes my wireless usb card?

I Bought an ipod classic 7gen 160 gb/
everytime i connect to sync with my comuter,
my wireless usb disconnects..... is it because, boht of them use usb?

If you are using an iPod Touch 4th generation, and your computer is a PC, soft boot the device (hold the power button and home button down at the same time). Once the device has "soft booted", see if the computer recognizes the device. If yes, then you are good to go. If it asks you to restore the device, then shut the iPod down using the power button only. Wait a moment and then restart the device. You may be prompted to install a driver, if so, then install it. Once the driver is installed you will be able to sync.
Now, for some reason I still have to plug the device into the computer, open iTunes and turn my device off and on before it will recognize it, but after that it works fine.

I tried to install AT-GPIB card to PC Window 98.

I just installed 488.2 for Dos/Win that included in the package AT-GPIB, but it causes my PC freeze. I tried to removed what I installed before by deleting directly AT-GPIB folder from C drive. Then I followed the procedure descriebed on NI web page (GPIB Installation Wizard):
- I downloaded atwin271.zip and I installed it
- I replaced the gpib-16.dll and gpib-32.dll files with those from the Compatibility Release. The error message display "File Copy operation failed-incorrect number of bytes written to disk - source file on destination disk may be corrupted - use chkDsk. Source:\GBIB-16.dll' Dest C:\Windows\System\GPIB.16.dll" while I tried to installed atwin271.zip. My questions are please tell me how to remov
e everything of GPIB that I installed before (it not displayed on "add & remove softwar") and how to correct the error.
When I tried to add new hardware (Control Panel) I got the error message:
"Setup cannot load the installer (GPIBI16.DLL) for the GPIB hardware being installed. Contact your hardware vendor for assistance." Another question is My test system run a program in C language on PC 386 with Dos environment. Now I tried to move the program and AT-GPIB to new PC with Window 98 operation system. Please tell me what is the best way to perform this task. Do I still use the program execute file of C language to new PC or I should run and combine a new execute file with the new PC system? Thanks
Anthony

Hi,
I think the following knowledge base article has the information you need:
http://pong.ni.com/public.nsf/websearch/862567530005F09C862566A3006B21CD?OpenDocument
DiegoF.

Trying to install wireless network, but can't find installation CD

Would like to get another CD to install a wireless network for Cisco wrt160n v2 router. I have rest the router to factory default. Would prefer to download the install wizard CD if possible.
Thanks in advance for your help!
Solved!
Go to Solution.

Hi hdkimball,
How about trying to get into the setup page of your WRT160N v2? Launch your internet explorer or other browsers then you type in 192.168.1.1. Leave username blank and password in small letters admin. Here are the links on how to reconfigure your router.
Setting Up a Router with Cable Internet Service
Setting up a Linksys router for DSL Internet connection

Cant install wireless internet card

I purchased a 15" mac book pro last week. For internet, i use a Huawei data card EC 168 C, which works fine on my windows laptop. But the app file wont install on the mac.
Is there any other app file i can use for installing.. or any other tip??
Thanks
Atul

Have you contacted your wireless provider to see if they have a modem script for Mac OS X? Have you checked the Huawei data card EC 168 C forums to see if anyone else has had a similar issue and/or resolution? Have you done any google searching?

Msi-6714 motherboard trying to install new graphics card

can anyone help me
i have tried installing an ati radeon 9600 graphics card on my msi motherboard and it wont take it
it will find it in bios but as soon as it boots in to windows it throws it out
the motherboard currently has onboard graphics which i have tried disableing but still cannot get the card to work
know the card is ok as it has been tested on another machine
yours hopefully

Normally, on-board VGA should get disabled when inserting a Graphiccard in AGP slot.
If not, this is done in bios.
According to your info, Looks like the Powersupply could be the issue.
Even if you don´t have the latest highperformance components, you still need at least some 400w with 18amp on the 12v line and 28amp on the 3,3v / 30amp on the 5v.
If it still not working you could remove PC powercable and clear CMOS jumper on MoBo ( read manual )
Please make full system spec incl. Powersupply.
There are some differant models of MS6714 MoBo´s.
Read between PCI slots on MoBo.
845GEM   MS-6714
845GEM (PCB 5.0)   MS-6714 V5.0
845PEM   MS-6714
845GVM   MS-6714
845GLM Combo-L   MS-6771
845GLM-L   MS-6714
845GVM (PCB 5.0)   MS-6714 V5.0

HT5293 Trying to install my CAC card reader. New to apple...

I am new to apple and need help installing my CAC on a macbook air. Can anyone assist me?

MilitaryCAC's Apple / OS X 10.9 (Mavericks) Resource page

Trying to install wireless usb card

Similar Messages

Maybe you are looking for