Trying to join another network that needs wpa p/w. i no p/w but OK button g

So.. im trying to join a network in order to use a printer but it wont let me"ok" the password. Why is this?

Which encryption protocol -- TKIP or AES/CCMP is being used by the wireless network that you are trying to connect the printer to? (Note: For AirPorts, WPA Personal uses TKIP, and WPA2 Personal uses AES/CCMP.)

Similar Messages

TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG

Why do I keep getting an "authentication failed" message when trying to join my network?

Why do I keep getting an "authentication failed" message when trying to join my network?

You may have to shut your computer off and pull the power adapter from both your ISP's Modem and your Router and wait 5 minutes and restart them in the following order.
1st your ISP's Modem and wait a minute to get your signal and lights.
2nd do the same with your Router and again you have to wait the minute.
Last restart your computer and boot in OSX use Safari.

I am trying to download an app that needs 501 MB and my iPod has over 1 GB, but the App Store says that I do not have enough memory left.

I am trying to download an app that needs 501 MB and my iPod has over 1 GB, but the App Store says that I do not have enough memory left.

Do you have a question?
That sounds right.
Most apps require more than double the size of the app available in order for installation.
Make more room.

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

My wifi button is frezon and I tried turning my phone off for a period of time and reset my phone but the button is still frezon it want slide over to turn on my wifi. Is there any other way to fix without going to apple to get it fixed?

My wifi button is frezon and I tried turning my phone off for a period of time and reset my phone but the button is still frezon it want slide over to turn on my wifi. Is there any other way to fix without going to apple to get it fixed?

Hey Posada143, You can still try the rice thing, but do not expect much, as roaminggnome has stated. The rice only works if you do it ASAP and leave the iPod off-- do not attempt use, turn on or charge until it is completely dried out. This is probably academic at this point but remember this for the next time: The drying can take 10 days. You put the uncooked rice and iPod in a sealed bag, change the rice every couple of days. This creates a low humidity environment and draws the moisture out of the iPod, but it takes time. Turn your iPod on to earlier, and you run the risk of shorting out, damaging the components inside. Even if done correctly it can spotty. If you do get the iPod to work (and this may require Resetting, Restoring or attempting to place it in DFU recover mode) the first thing you do is make backups, because you never know how long it will continue to work. As for your pictures, if you can't get your iPod to work, you can try data retrieval companies, however; there is no guaranty it will work and it tends to be very expensive. In the future get in the habit of as making backups, because you just don't know. And invest in and use a water tight case. Hope this helps, Good luck. Cheers.

New iphone. Trying to join family network with correct password. Says unable to join

I have a new iPhone. I am trying to join my wireless network with the correct password. I get the error message "Unable to join...". My network is fine, because my itouch works OK. Any hints?

Hi jrzldy,
Here are some troubleshooting tips that may help to resolve your issue:
http://support.apple.com/kb/TS1398
Cheers,
GB

My MBP keeps joining another network!

Hi,
I live in an inner city location. My MBP can see several WiFi networks. It used to join my Airport Express network on power-up, and stay firmly attached to it. Now it often joins another nearby, insecure, network. This can happen any time. When I try to re-join my network, I am prompted for the password.
What to I have to do to purusade my MBP to stay joined to my house network and not keep joining this other one!

Try this.
Head to System preferences > Networks
Select Airport in the left hand pane if it isn't already
Click on the "Advanced" button in the right hand pane
Select the "Airport" tab in the new window if it isn't already selected.
Delete any networks in the list that you don't want to use
Drag your primary network to the top of the list
Click on "OK"
In the original window click on "Apply"
You should now be done.
Cheers
Rod

When I got my iphone4 I imported data from my pc. Now, when I text people get my old company name. I deleted my contact entry and reenteredthe correct information. It still sends my old company name. Is there another place that needs to be correted?

When I got my iphone 4 I imported data from my pc. Now, when I text people my old company name comes up. I deleted my contact info and reentered it. Still the old company name. Is there another place I need to change the info? Thanks so much!

Tank you Blake,
Your not alone thinking this is a nightmare and if this not a topic concerning all old apple costumer's Mr Roger you never been on the support pages before. If you not believe me search "merge multiple Apple ID" on support page or Google it, I know you know this because you always trying to help frustrated people by saying this is not possible...
Thank you again Blake

TS1398 I just got I5 and when I tried to join my network it says it is not allowed? How do I fix this?

I got 15 and when I tried to join my wireless network it states I can not join any ideas?

I assume your wifi network requires a password to join to it. IF so enter the password when the phone asks for it when attempting to join the wifi network

How do you uninstall software? I have tried to download printer software that needs to be reinstalled and I cannot proceed until the original version is completely uninstalled.

I have installed printer software that needs to be uninstalled and reinstalled and I keep getting an error message saying that the application is running and needs to be closed before proceeding. I do not know how to close applications and uninstall software. Any help????

If its an actual application and appears as an icon in applications then click and hold over the icon and drag it to the trash can. That should uninstall it as far as I know.
If its like the HP printer software then there is an uninstalled icon within the folder.
Hope it helps.

HT1451 I am trying to restore my playlists that disappeared yesterday. I have followed these instructions but when I get to step 7, I can't find File Library Import playlist. What am I missing?

I am trying to restore my playlists that disappeared yesterday. I have followed the instrutions on the support page but when I get to step 7, I can't find File>Library>Import Playlists. What am I missing?

I suspect the menus have changeed slightly since that document was written...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Is it possible to set up Time Capsule on one network and then access its stored data (movies) using Back to My Mac from another network that also has Apple TV to play them?

I recently purchased a Time Capsule to store data at my office. I have an Apple TV at my home that I would like to start using to play my movies. With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV. Does this sound possible? We have an iMac at the office that remains on 24/7 connected to the TC.

ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more.

Trying to join two views that have different column types

I want to join view1 and view2 on region and city int columns. Need to break apart View1 varchar field into two Int fields and replace any non-numeric values with zeros.
View1 has a single Region_City field that is VARCHAR. the last record is erroneous. the individual values for Region and City should always be Int.
0001-8374
0222-0034
3333-0001
XXA-EEE
View2 has Region and City as two seperate Int columns (i will seperate with comma just for display)
Region,City
1,8374
222,34
3333,1
I want to create two new individual columns in view1 that will have Region and City each as a Int. And for any Region_city that is invalid numeric just use zeros in Region and City.
I currently have this (in house ParseDelimited sproc), but am having trouble with the invalid numeric values (XXAA-EEE)
REPLACE(LTRIM(REPLACE(dbo.ParseDelimited (Region_City, '-', 1), '0', ' ')), ' ', '0') as Region,
REPLACE(LTRIM(REPLACE(dbo.ParseDelimited (Region_City, '-', 2), '0', ' ')), ' ', '0') as City,

This is a way to do it, by no means the only way, but a way. (The other way to achieve this would work fine, but would require functions inside functions inside other functions, including repeating at the very least "Patindex('-', RegionCity)"
a few times. In this situation, the APPLY statement comes in handy by making it a little easier to read.
Declare @ExampleTable Table (RegionCity Varchar(99))
Insert @ExampleTable /* This is just to recreate a test table */
Select '0001-8374'
UNION ALL Select '0222-0034'
UNION ALL Select '3333-0001'
UNION ALL Select 'XXA-EEE'
UNION ALL Select 'a really bad error, no numbers or dash at all'
UNION ALL Select '1-2'
UNION ALL Select '12345678-98765432'Select RegionCity
   , Cast( Coalesce( Case When IsNumeric(RegionCode) = 1 then RegionCode else '0000' End, '0000') as Int) as RegionCode
   , Cast( Coalesce( Case When IsNumeric(CityCode) = 1 then CityCode Else '0000' End, '0000') as Int) as CityCode
From @ExampleTable
Outer Apply (Select CharIndex('-', RegionCity) as DashPos) CaDash
Outer Apply (Select Substring(RegionCity, 1, DashPos - 1) as RegionCode
                   , SubString(RegionCity, DashPos + 1, 99) as CityCode where DashPos > 0) as CA2
You didn't mention how bad the source data might be, how unpredictable it might be, whether it's always coded exactly as listed. This way is reasonably flexible.
EDIT: I used "IsNumeric" in this example. It's quite an imperfect function, often best avoided, but I used here just because it's probably OK in this example.
This is probably better: "Case When PatIndex('%[^0123456789]%', CityCode) = 0 Then CityCode else 0 End"

Just another person that needs help, yes in a rush and yes is very upset

I installed the ipod program into another computer today and when I went to open it all my songs were gone. On the computer it was orginally on I have all my songs in my library but can't put them into my ipod. it won't let me. i uninstalled the program and reinstalled it and all my songs were still there but I still couldnt transfer them into my ipod. Mean while the program is working on the other computer but I have all my songs on the other computer. Please help me get my music back into my ipod. please!!!!!

if you installed iTunes on a new computer, there will be no music in the Library since it was a clean install
you either need to:
1) start downloading/importing music from iTMS or ripping CDs
2) or copy the contents of your iPod into iTunes
with your ipod connected, go to iTunes--Preferences--iPod
change Automatically Manage to Manually Manage songs

Trying to join another network that needs wpa p/w. i no p/w but OK button g

Similar Messages

Maybe you are looking for