Trying to launch Lead Search UI

hi
iam trying to create z component like Component BT108S_LEA
in the output ,
iam geeting the Search View, but not geting the Result view (i made it as table view)
error comes
Cannot display view ZLEADSEARCHUI11/Result1 of UI Component ZLEADSEARCHUI11
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'RESULT' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39

by make changes . i resolved my issue/
*************ques closed***********

Similar Messages

When accessing eBay with Firefox and launching a search, I get less results/hits with Firefox then when using Internet Explorer, why? Try it, you'll see.

For example access eBay with Firefox and launch a search on the word Frankenstein: you'll get something like 23,671 results (if you search in ''All categories''). Then quit the Firefox browser and load Microsoft Internet Explorer instead; access eBay again and repeat the very same search: this time you'll get 25,383 results. These are reral figures that I tried at 19:21 on March 20, 2014. Why does a search on eBay through Firefox report less hits than the very same search through Internet Explorer? Using Firefox rather than Microsoft Internet Explorer automatically means missing hits/results/items on eBay: that doesn't make sense but it does happen. Why is it so? Thank you, somebody, for shedding light on this problem.

Try this steps and try to load the same once again!!!
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Tried to launch photoshop CS 5.1 suite, messages said I had to unistall it - and then reinstall it but needed to download Java se 6 I installed java and was given Java for Ox 2014-001 then uninstalled PS I have been unable to reinstall PS 5.1 I don't kno

I tried to launch photoshop CS 5.1 design premium suite. It did not launch.( Have not had a problem before this) Received a message which said that I had to uninstall it and then reinstall....but first had to download Java se6. I installed Java...
it gave me Java OX 2014-001.Message: that version supercedes all previous versions of Java.
Went back to PS suite icon and uninstalled all. I have been unable to figure out how to
reinstall this program. The only thing that I could find was a very grey icon with an arrow that said "finder".
Went to the finder icon, searched with NO SUCCESS. Please help. I have read several blogs and many people seem to be having
this problem. Note. I recently upgraded to Yosemite. jude obscure. Thank you

Thanks for reply. Will search for the answer on forum . Just found the forum website about 2 days ago.
Adobe help contacted me. Offered an $1,800. upgrade to PS 6. Not a good choice. Was very happy
with PS 5 design suite. Will try to figure out how to download PS updates and manually apply them.
Adobe person walked me thru a download process for PS 5....last night.
After 2:30 am I installed PS 5 design suite. I now have a PS 5 D.S. icon with a red disc on desktop..
but am unable to install it. Will continue to search for way to apply it. thanks again.

System trying to launch deleted app

Hi - The console is telling me that the system is constantly trying to launch a deleted app, "reachmyfile". Any suggestions about how to get the system to stopping searching for it? I've done the usual stuff...repaired permissions, cleaned out system caches, etc.
Thanks in advance -
Dan
3/7/13 10:39:25.034 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[649]) Exited with code: 1
3/7/13 10:39:25.034 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware) Throttling respawn: Will start in 10 seconds
3/7/13 10:39:35.036 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[651]) Job specified non-existent working directory: /Applications/ReachMyFile.app/Contents/Resources/Java
3/7/13 10:39:35.219 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[651]) Exited with code: 1
3/7/13 10:39:35.219 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware) Throttling respawn: Will start in 10 seconds
3/7/13 10:39:45.219 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[655]) Job specified non-existent working directory: /Applications/ReachMyFile.app/Contents/Resources/Java
3/7/13 10:39:45.396 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[655]) Exited with code: 1
3/7/13 10:39:45.396 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware) Throttling respawn: Will start in 10 seconds
3/7/13 10:39:55.397 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[658]) Job specified non-existent working directory: /Applications/ReachMyFile.app/Contents/Resources/Java
3/7/13 10:39:55.578 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[658]) Exited with code: 1
3/7/13 10:39:55.578 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware) Throttling respawn: Will start in 10 seconds
3/7/13 10:40:05.580 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[659]) Job specified non-existent working directory: /Applications/ReachMyFile.app/Contents/Resources/Java
3/7/13 10:40:05.770 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[659]) Exited with code: 1
3/7/13 10:40:05.770 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware) Throttling respawn: Will start in 10 seconds
3/7/13 10:40:15.771 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[660]) Job specified non-existent working directory: /Applications/ReachMyFile.app/Contents/Resources/Java
3/7/13 10:40:15.957 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware[660]) Exited with code: 1
3/7/13 10:40:15.957 AM com.apple.launchd[1]: (com.reachmyfile.desktopsoftware) Throttling respawn: Will start in 10 seconds

Go to one of the following folders and locate the file called "com.reachmyfile.desktopsoftware.plist" and then remove it. You can get to these folders by selecting each line below individually and right-clicking the selection and then choosing "Reveal" or "Open" from the Services contextual submenu.
/Library/LaunchAgents/
/Library/LaunchDaemons/
/System/Library/LaunchAgents/
/System/Library/LaunchDaemons/
~/Library/LaunchAgents/

I am trying to launch Firefox 9.0.1 on Windows 7 but the application window isnt visible even though there is a firefox.exe process running in task manager.

I am trying to launch Firefox 9.0.1 on Windows 7 but it isnt working. I try to launch it and the application window does not show. When I look at the task manager and then look at the Applications tab, Firefox isnt listed. If I go to the Processes tab, there is a firefox.exe*32 process listed. Each time I double click the Firefox icon, a new firefox.exe process is spawned but there is never a visible instance of the Firefox application.
There are no errors in the application logs. I end up just having to kill the processes.
I tried launching in safe mode by holding down the shift button but the same thing happens.
Any suggestions on what to try? It has never worked since upgrading from version 8. I tried un-installing and re-installing

I went through everything mentioned in the link you posed and nothing detailed there resolved the problem.
The Profile folder didnt exist so I created it. Made sure the perms were good and that it was not read only.
There are no default folders appearing under the profile folder when I start Firefox.
I have Firefox installed to my E drive.
Nothing happens. The process appears in the task manager but no application shows up.
Cant start it in safe mode, cant run the profile manager.

I am trying to launch my external hard drive through maxtor central access manager. It will not launch and I keep receiving a KERN_PROTECTION_FAILURE error. Through discussion threads, it sounds like it may be a disk utility, repair issue. Please advis

I navigated to disk utility and verified disk, which returned no errors.

I'm not sure what you mean when you say that you're "trying to launch" an external hard drive, but you don't need Maxtors software to mount it on the desktop. Is this a new drive? Have you formatted it using Disk Utility?

I am having a painful problem with itunes 10, everytime I go into the itunes store to search for a song, even if I type one letter in it will instantly launch into search mode and doesn't stop, so I'm unable to find

I am having a painful problem with itunes 10, everytime I go everytime I go into the itunes store to search for a song, even if I type one letter Itunes will instantly launch into search mode and doesn't stop, so because I can never get past putting in the first letter or two, I'm unable to search and download any songs. I am on the latest Imac Intel core i7 Mac OS X, can anybody help?
Thankyou.
Beckyg.

Having this problem too: IT'S REALLY REALLY ANNOYING!!! Anyone have an idea how to sort this?

I tried to launch iCloud on iMac. I Changed my e-mail address recently, and iMac doesn't seem to know it. Even worse, it doesn't know any password I've used with Apple ID. Can anyone help me?

I tried to launch iCloud on iMac. I Changed my e-mail address recently, and iMac doesn't seem to know it. Even worse, it doesn't know any password I've used with Apple ID. Can anyone help me?

No, i don't. if i did i would have tried it. do you have to sign up an appled ID for iCloud? If the answer is yes then they should mention that in the set-up instructions.

Get error message when trying to launch bridge from CC 64 bit.

Get error message when trying to launch Bridge from Photoshop CC 64 bit. "Cannot complete command because extension cannot be loaded." Need fix. Thanks.

Hi Adobe Bubba,
Please uninstall the software, run the cleaner tool, restart your machine and install again.
Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
Regards,
Romt Sinha

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Ple

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Please re-install the software... I have no idea where my software is... That was many many years ago? HELP!!

When you go to the download page, you must do two things:
Download this file: PhSp_CS2_English.exe on the download page.
Use the serial number on the download page in order to install your non-activation copy.
Do not use your old CD or serial number. It no longer works.
If you have Windows 7, the advice is to turn off UAC and run the installer as Administrator.
Gene

When trying to launch iTunes it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." I am unable to enter a uname or password. Please help!!

When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.

That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2

Error 0x80070490 trying to launch VM without SCVMM on Windows 2008 Server R2

Hello everybody,
I get a weird issue trying to launch a VM.
This is the current situation : I get a server, Windows 2008 R2. I've only install Hyper-V and Failover Cluster. I can create a VM but when I try to launch it, I get an error message into a popup (translated from french) : "The application encountered
an error during modification of 'vm_name' state". "'vm_name' could not be initialize". "Could not initialize machine remoting system. Error 'Element not found'. (0x80070490). "Could not find a usable certificate. Error: 'Element not found'. (0x80070490)."
So, I'm unable to launch my vm's.
I'm not using SCVMM yet. I want to resolve this issue before.
I read some articles and posts about SCVMM certificate issue but I'm not using SCVMM.
More fun, I read articles about this issue but on Windows 2008 Server (not R2) : problem resolved by a fix, unapplicable on my Windows 2008 R2 :)
I'm totalyblocked and ain't got no idea how I can resolve it.
If someone gets I idea ...
Cheers,
Nicolas

Environment: Windows 8.1 in an Active Directory Domain (2012R2) with MS Certficates Services support NAP/Health Registry, etc.
Error: Attempts to start a Hyper-V VM on a machine generates the error message Error 0x80070490 trying to launch VM:
"'vm_name' could not be initialize". "Could not initialize machine remoting system. Error 'Element not found'. (0x80070490). "Could not find a usable certificate. Error: 'Element not found'. (0x80070490)."
Note:
VMM can manage other Hyper-V servers in environment from same machine, just not local machine.
VMM on remote machine generates same error message when attempting to manage new VM machine
Certificates - Service (Hyper-V Virtual Machine Management) on Local Computer shows 0 certificates under vmms\Personal
Fixes Attempted and Failed except for #5!
1) hotfix directly: Windows6.0-KB967902-x64.msu -> Failed: 0x80096002, Windows Update Standalone Installer. The certificate for the signer of the message is invalid or not found.
2) hotfix via pkgmgr: PkgMgr.exe has been deprecated. Please update scripts to use DISM.exe. 0x80070307
3) Reset Certificates:
Start > Run > MMC
Add the Certificates Snap-In
Select Service Account
Under the Select Account to Manager, select Hyper-V Image Management Service
Complete the Snap-In Wizard
Expand the Certificates under Personal Category
Notice the certificate generated has been created ‘for the future’ (assuming you’re suppose to revert the date & time to 2010, the certificate should display as invalid because it was created at 2013)
Delete the Certificate(s)
Go to the Services Console and Restart all Hyper-V Services
Result: No certificate auto generated
4) Uninstall / reinstall hyper-v service and management service addons from Windows features.
5) ‎did the following from http://technet.microsoft.com/en-us/library/ff935311(v=ws.10).aspx (WORKED!!! -> Note, their PS script has an error, add a dash(-) before the word recurse)
reg add "HKLM\Software\Microsoft\Windows NT\CurrentVersion\Virtualization" /v "DisableSelfSignedCertificateGeneration" /f /t REG_QWORD /d 1
24 ca 36 b5 bd 6d ef 7e eb aa a5 74 df e5 fd 41 ef ab 1c 29
$certs = dir cert:\ -recurse | ? { $_.Thumbprint -eq "24ca36b5bd6def7eebaaa574dfe5fd41efab1c29" }
$cert = @($certs)[0]
$location = $cert.PrivateKey.CspKeyContainerInfo.UniqueKeyContainerName
$folderlocation = gc env:ALLUSERSPROFILE
$folderlocation = $folderlocation + "\Microsoft\Crypto\RSA\MachineKeys\"
$filelocation = $folderlocation + $location
icacls $filelocation /grant "*S-1-5-83-0:(R)"

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Mac 10.9.5 trying to launch Illustrator CS6 for first time and prompts Java even though I have Java 8 installed.

Mac 10.9.5 trying to launch Illustrator CS6 for first time and won't launch, prompts for Java 6 even though I have Java 8 installed!
Apple says Java 6 is very insecure and not to use it. I have the latest Java installed. Why won't Illustrator launch? What else can I do?

tm,
I believe you should be able to get round the issue by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Trying to launch Lead Search UI

Similar Messages

Maybe you are looking for