Trying to link 2 e4200 routers together on same network via a switch

I have had my internet working fine for a long time with e4200 routers joined together via a 5port switch in the middle of the house. I have not ever been able to see computers however hooked from one router to those hooked to the other router. I have made the attempt to use the Advanced routing, but I get constant invalid static ip route when I put in the IP address etc of the other router. What am I doing wrong? I would like to be able to access computers in the other end of the house with shared directories, but I can not see them on the network. I also have a wireless printer that I am unable to see from one room to the other room.
Anyone that can help me set up the primary router that is plugged into the Cable Modem for internet access, to read with the secondary router that has the printer hooked up to, as well as other computer systems, and vice versa. internet goes through fine from secondary router through the switch to the primary router and out to the modem.

I suggest, you do the LAN-LAN router cascade. This link will guide you through it, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...
There is also a video for it, http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=26941

Similar Messages

  • I've forgotten my Wi-Fi password for a network set-up years ago and am trying to include a new iMac on the same network. How can I do this?

    I've forgotten my wi-fi password for a home network set-up years ago on a Powerbook. I'm now trying to add a new iMac to the same network so I can have 2 hooked up. How can I retrieve my password for the network I created or can I set-up a new one? I did try the latter, but it didn't seem to work on the new iMac for some reason. Thanks in advance for any suggestions!

    HI, Welcome to the Forums...
    The password may be stored in your keychain on the system you set up the original PowerBook.
    Run KeyChain access in the utilities filder and see if you have a Airport base station password entry, from this you can reveal the password.
    Regards,
    Shawn

  • 2 routers on the same network

    I have installed 2 Linksys routers type WRT160N and a WRT160Nv3. Both ar DHCP installed, channels are 1 & 10, IP adresses are divided so Linksys 1: 192.168.1.1 - 149 and Linksys 2 :192.168.1.150 - 200. If anybody have another idea please come forward. Many thanks in advance. 

    You are trying to cascade routers. There are 2 ways to cascade routers: LAN to WAN and LAN to LAN.
    LAN to WAN is connecting the LAN connection of the Router 1 to the WAN port of the Router 2. [Use this if you want the computers to be on 2 different networks.]
    LAN to LAN is connecting the LAN connection to one of the LAN ports of the Router 2. [Use this method if you want the computers to be on the same network]  
    The complete steps on how to do this is explained in this article, click here.

  • What is the best way to link 4 Airport units together wirelessly?

    Hi guys,
    I have a home with tick walls and creating  a decent wireless network was always a challenge. Recently I’ve decided to go for Apple products since I had a 4th gen airport express that worked well for airplay.
    I bought a new time capsule, airport extreme, and one airport express. So in total I have 4 apple devices that I can use for creating a good wireless network. But what I found out is that having a full signal doesn’t mean that you will have good speeds, and speeds are really slow like 3Mb/s max on some places on the house.
    The way that everything is configured at the moment is that I’ve configured the time capsule to be the main router and with the other three I’ve spreaded them over my house and selected the option to extend a wireless network using Airport Utility 6.2 on OSX.
    What is strange that I have a full signal on almost all corners but very bad speeds. I did some research and found a tool that would show what the less crowded channel that you can choose for you wireless network (http://tools.meraki.com/stumbler)
    In all my experience of extending a wireless network I’ve always used routers with DD-WRT so I could select the router to be a repeater bridge (and have two distinct networks, with different names) or link the routers with WDS linking them using the MAC address. In both cases all the documentation I’ve read recommended to set all routers of the same network with the same channel.
    When I used the stumbler tool to see what channel my network was, since it was set as automatic because it’s the recommendation of Apple documentation, I found out that all 4 routers were operating on different channel on both 2.4Ghz frequencies and 5Ghz frequencies.
    What is strange with the wireless network is that sometimes when it is really slow the speed of the internet, if I disconnect from the wireless network and connect again it gets a better connection, like I was connection to a closer router. But after sometime speeds get crappy again, like it changed to the far router again.
    My question is, what is the best way to link all this routers together wirelessly? Is there a way to make them to be all on the same channel? Is that important?
    On the Airport Utility 6.2 I don’t see any field that would make possible to link this routers using WDS. On the internet I found some documentation for configuring the routers with WDS with the Airport Utility 5.6.
    All my routers are updated to the latest version (7.6.3). Please let me know how to proceed to have a decent network on my house. I wouldn’t mind having the network set with different SSIDs but it would be better to use the same network name on all the house.
    Thanks in advance,
    Tiago

    At the moment it is configured like this.
    [IMG]http://img254.imageshack.us/img254/6403/capturadetela20130210s2.png[/IMG]
    My problem is that the signal its strong but speed isn’t. On Wifi stumbler I saw that every router is set to be on a different channel, they had to be the same no?
    If its really slow if I disconnect and connect again from the network. It gets faster, like it connected to a closer router or something.
    All are set to extend a wireless network.
    Regards,
    T

  • OBIEE: Link Two Separate Queries Together

    Hi,
    I am trying to link two separate queries together in BIEE.
    I have a query that will give me the sales value in January 2012 (monthly query)
    But I would need to use the sales value of January 2012 to help derive the weekly sales value in another query (weekly query).
    How would you link up two queries together?
    I tried using union but it doesnt seem to be working.
    Thanks.
    Bill

    Hi Billy,
    Sure, My pleasure. Here are the basic steps what you could go through.
    1. Create an analysis with your Month (January) and Sales.
    2. Save this analysis as Report1.
    3. Create another analysis with Week and Sales.
    4. Create a filter on column:Sales using the option 'Based on Another Analysis'. The analysis editor will provide you an option to browse your other analysis which you want this analysis to be based on and just click on this browse button, and navigate to and select Report1.
    5. Once you have selected Report 1 through browse option, you get down in the same pop-up the relationship and use values in column.
    So sample entries in this pop-up might look like
    Column : Sales
    Operator : is based on results of another analysis
    Saved Analysis : /My Folder/Report1
    Relationship : is equal than
    Use values in Column : Sales
    6. If you run this analysis, you could get all weekly sales figures which are equal to the january sales figures.
    Hope this helps.
    Thank you,
    Dhar

  • Is It Possible To Run 2 Routers At The Same Time.

    This might be the dumbest question of all time but I am not computer savy. My two wireless PCs operate beautifully on my Linksys WRT54G. If, when I get the MacBook Pro, and for some strange reason I have connection proglems, can I get one of the airports and set it up just for the Mac. Read all sorts of problems of PCs not connecting to the Airports properly. I might be overly concerned but I don't have an Apple Store near me. I am driving 200 miles to Charlotte to justr try out and buy the Mac.

    You can put two routers on the same network, but you have to set them up correctly. You can put one of them in bridge mode, which means it will just act as an access point for the primary router, but won't do any routing itself. The second way is to set up a double NAT, with one router handling the Internet connection to the outside world and the second router handling the local network.

  • Link 2 Linksys WRT54G together

    Our office has 2 connections to the internet. Each connection comes into our building through a Linksys WRT54G router. I like to connect the routers together through their ethernet ports so that we can share resources such as printers and etc. Should I config each router such that they are actually on the same network? For example:
    Router 1:
    Router IP 192.168.1.1
    DHCP serves 192.168.1.100-150
    Router 2:
    Router IP 192.168.1.2
    DHCP serves 192.168.151-200
    Or do I have to configure each router to be on its own network and set up some form of routing between the routers?

    There are two ways to cascade a Linksys router to another Linksys router:
    Connecting one of the Ethernet ports of the second Linksys router to one of the Ethernet ports of the main Linksys router.
    Connecting one of the Ethernet ports of the second Linksys router to the Internet port of the main Linksys router. 
    Here is the link for the same: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=544875a49c5c4896bdae485fa7968550_4529.xml&pid=80&r...

  • How would I link different templates layout together

    Hi
    I'm new here but not new to Dreamweaver. But having said that I never used the "save as template" for multiple page layout, if that's possible at all.
    The website I'm working on has 4 different page layout and I'm wondering if I can link the templates together so I don't have to go over each templates to make changes to the navigation as the site grows.
    The site will eventually end up with hundreds of pages using the 4 layouts and possibly more down the road. Hence the reason why I'm trying to find a way to link all the templates together.
    I'm using Dreamweaver cc and the site is html.
    Any advice would be much appreciated.
    Thank
    Joe

    Nested Templates are bad news. There's no reason to use them.  Don't go down this slippery slope. In fact, there's no reason to use 4 Templates.  It unnecessarily complicates your site.  One template that contains  everything you need for your entire site is all that's required.  Learn to use "Optional Editable Regions" and embedded CSS code for page specific styles.  One Template makes your life so much easier .
    Nancy  O.

  • 2 ROUTERS TOGETHER?

    CAN i CONNECT 2 ROUTERS TOGETHER? IN ORDER TO CONNECT MORE PC'S?

    Yes, you can connect two routers.
    Follow this link
    Message Edited by Maximus on 08-07-2006 03:57 PM

  • HT5538 I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    HI,
    In effect this is a DNS block.
    You can do it.
    You need to be in an Admin Mac User Account that has  non blank password.
    Go to the Applications/Utilities folder and open Terminal.
    You should see your shortname (the one under the Little House icon) followed by the $ symbol
    Copy and paste the bold text below into Terminal after the $ symbol.
    sudo pico /etc/hosts
    This will load the file "hosts" into and editor that works in Terminal.
    Use the arrow keys to get to the line with Verisign in it.
    Now type the # symbol and it will be added in front of the character that is highlighted.
    The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
    Now use CTRL and O keys together.
    This Saves the changes.
    Quit Terminal.
    10:02 PM      Wednesday; May 1, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Linking up two routers

    I am having a big problem that Verizon just can't help me with. I am trying to link up the MI424WR which is a fios broadband modem and router with another wireless router WRT54G Linksys, but I can't get it to work. Can you please tell me how to set up this up in order to make it work. The MI424WR is in the basement and is hard wired, I can't pick up the wireless connection because the signal is weak, so I want to use another router upstairs to get wireless. How do I set up the routers?
    Message Edited by dat329 on 08-22-2007 05:51 AM

    I think this should be the way you make the connection:
    Internet -> MI424WR (modem/router) -> WRT54G -> computers
    You should configure WRT54G as access point only, then it should work.
    Hope helps..

  • I have two iTunes accounts.  When I view account info on a older account that I seldom use. It indicated that it was associated with one device;I.e., my IPad.  Ian trying to link it to the other account instead

    I have two iTunes accounts.  When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad.  I am trying to link it to the other account instead

    johnfromnorth andover wrote:
    I have two iTunes accounts
    Why?
    When I view account info on a older account that I seldom use, it indicated that it was associated with one device; I.e., my IPad.  I am trying to link it to the other account instead
    You want to uise the newer account with the iPad?
    Settings > Store.
    Tap account, sign out then sign in with the account you want.

  • Hi, I am trying to link my Ipad to my email account, and keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on.  Please help.

    Hi, I am trying to link my Ipad to my email address, but I keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on to. Can someone please help me?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I am trying to link to page in my document from the table of contents.  How can this be done?

    I am trying to link to page in my document from the table of contents.  How can this be done?

    The Table of Contents picks up selected named Styles in the text like Head 1, 2 etc.
    Have you actually applied the styles?
    Peter

  • Trying to  link EIPO foreign trade data to VBAK,LIPS,LIKP,KNA1,TVROT

    Hi
    I am trying to link table EIKO - Foreign Trade data on delivery item data to my existing Quickview which has the following tables,
    VBAK - Sales Doc header
    LIPS - Delivery item
    LIKP - Delivery header
    TVROT - Route
    KNA1 - general data in customer master
    But when added SAP says 'no relationship Found'
    Do i need to add another table as a common link ?- if so which one?
    Many thanks for your help and advise
    Tony

    Hi
    I'm not sure what you want to do. But the link is in EIKP-REFNR. With this field you can link to PO, deliv, invoice and so on.
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for