Trying to link SharePoint 2010 Enterprise with SharePoint 2013 Search Server raises error

Hi,
I am currently working for a multinational who has SharePoint 2010 Enterprise Edition installed, 2 WFE SERVERS, 3 APP SERVERS, 1 DB SERVER. They also installed SharePoint 2013 Exterprise recently.
   Microsoft have recently come in and set up the SharePoint 2013 Search Server to crawl content in SharePoint 2010 as the replacement search to SharePoint 2010 Search. So they have gone through process of certificates and permissions
setups I guess. I was told it was working, but recently failed. When I type in the search box on a web site for SharePoint 2010 I get the message:
         The search request was unable to connect to the Search Service.
I checked the Event log and the Critical error (in Task Category:Timer) I get is the notorious: 
The Execute method of job definition Microsoft.Office.Server.Search.Administration.CrawlReportJobDefinition (ID fa882704-80d9-415b-9b9d-eae5e9bdefd4) threw an exception. More information is included below.
        The search service is not able to connect to the machine that hosts the administration   
        component. Verify that the administration component 'e9172a05-22ec-4904-9508-
        e5431a180c2b' in search application 'Search_Service_Application' is in a good state and
        try again.
I know administration component is the crawler. I am assuming this is permissions.
The SharePoint 2013 Search Server is picking up SharePoint 2010 site collections items fine i.e. The SharePoint 2013 search shows items from 2010 as expected.  
On the SharePoint 2010 central admin box the search service enabled and running (checked with powershell). (SharePoint Server Search 14)
The Search Service id: e9172a05-22ec-4904-9508-e5432a180c2b
I also get the message in event log for gatherer on SharePoint 2010 CA and Search Server:
       Could not access the Search database. A generic error occurred while trying to access the database to obtain   
       the schema version info.
       Context: Application 'e9172a05-22ec-4904-9508-e5431a180c2b'
Details:
            (0x80040e09)
Is this permissions to delete something from crawler??????
I would appreciate if someone could help on this. I have tried to be as concise as possible.
Thanks.
John.

It was a case that someone had fiddled with the Service App Associations. Hadn't ticked SharePoint 2013 search. Was still point at 2010. Thanks.
The SharePoint 2013 Search works correctly for SharePoint 2010.
Can someone confirm that the Search Service Application on SharePoint 2010 still needs to exist and hence SharePoint Server Search 14 Service still needs to be running? I am guessing it would as you search from 2010 interface not 2013. I am getting a critical
error in the Event Viewer:
CrawlReportJobDefinition (Id <SharePoint 2010 Crawler>) 
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component <crawler id> in search application "Search Service Application" is in a good state and try
again.
I think this is related to the fact we have SharePoint 2013 doing the search instead of 2010.
Any ideas?
John.

Similar Messages

  • Migration from sharepoint 2010 enterprise to sharepoint 2013 standard

    Hi
    I need to do migration from SharePoint 2010 enterprise to SharePoint 2013 standard. We have only one content database and no custom deployments. I had tried database attach upgrade method. After I run Mount-SPContentDatabase PS Command. First it ran well
    for few minutes then it got stuck  for hours and finally failed . Please let me know if anyone came across this situation. How to migrate from SharePoint 2010 enterprise to SharePoint 2013 standard? Thanks in advance.

    Thanks norari,
    Yes ,following are the errors that i got during migration. 
    Event 5586(SharePoint foundation) of severity 'Error' occurred 6 more time(s) and was suppressed in the event log.
    Failure trying to synch
    web application a1c11f44-3bc3-4cce-ad2d-e1a459c46c67, ContentDB
    6681d540-313f-4ccc-a770-66608eecf3be
    string1
    System.Data.SqlClient.SqlException
    (0x80131904): Invalid object name 'TVF_EventCache_ReadPast_LEQId'. Invalid
    object name 'TVF_EventCache_Id'. at
    System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean
    breakConnection, Action`1 wrapCloseInAction) at
    System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
    stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at
    System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand
    cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
    TdsParserStateObject stateObj, Boolean& dataReady) at
    System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at
    System.Data.SqlClient.SqlDataReader.get_MetaData() at
    System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds,
    RunBehavior runBehavior, String resetOptionsString) at
    System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32
    timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at
    System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
    RunBehavior runBehavior, Boolean returnStream, String method,
    TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean
    asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at
    System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String
    method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
    behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
    command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean
    retryForDeadLock) at
    Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command,
    Boolean retryForDeadLock) at
    Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command) at
    Microsoft.SharePoint.SPChangeToken.GetCurrentChange(SqlSession session,
    Int64& changeNumber, DateTime& changeTime) at
    Microsoft.SharePoint.SPChangeToken..ctor(SPContentDatabase db) at
    Microsoft.Office.Server.UserProfiles.ContentDBSynchronizer.SynchContentDB() at
    Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean
    fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock,
    FinallyBlock finallyBlock) at
    Microsoft.Office.Server.UserProfiles.WSSProfileSyncJob.Execute()
    ClientConnectionId:a1e477c3-5e3c-4e38-818b-18504ae9b5ce Error
    Number:208,State:1,Class:16

  • Cannot open Sharepoint 2010 task with Outlook 2013

    Before I start, I have already gone through the "Unable to open Sharepoint 2010 task from any office application - cannot open new form (schema validation errors).  I have tried all the fixes listed in that thread to no avail.
    What I am wondering is if it there is something more complex happening because I have outlook 2013 but our SP server is 2010. 
    Can anyone tell me if there is a way to make this work?  I have tried everything that I have found and a lot more to try and resolve this, have been working on and off on this problem for more than 6 months.  Any help would be appreciated.

    Hi Matt,
    According to your description, the task cannot be open in Outlook 2013.
    The issue may be with any Multiple lines of text fields in Enhanced Rich text type in the SharePoint 2010 Task List or the associated task list for the workflow.
    I recommend to check for any Multiple lines of text fields(such as Description field) in the SharePoint 2010 Task List or the associated task list for the workflow, and change them to Plain text or Rich text instead.
    More information are provided in the link below:
    http://mysharepointkb.blogspot.in/2012/11/cannot-open-sharepoint-2010-approval.html
    If it cannot work, could you please provide more information in the ULS log?
    Please go to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14 to get the log.
    Best regards.
    Thanks

  • SharePoint 2010 functioning incorrectly after installing Search Server Express

    Hi,
    and thanks for taking the time to lend a hand and your knowledge. I have a Sharepoint Foundation 2010 site that has went crazy after I tried to install Search Server Express - which FAILED near the end.
    I have checked the logs for the correlation Id provided on the SPF site when it errors.
    03/05/2015 10:02:23.75  w3wp.exe (0x101C)      0x1264 SharePoint Foundation          Runtime                      
     tkau Unexpected System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()     at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs
    e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b5f617dc-5d0e-4c5b-92fa-1b7e5a12f2e3
    My issue now is that it appears I will need to remove the SSE install, but from what I can see online this can have a serious impact on the SPF site. I really want a few opinions as to what my best route to take would be on this issue.
    Also, I am wondering what would happen if I run the install again of SSE, would it resolve,
    OR
    is it going to be a matter of detaching the content database and reinstalling SPF2010, and reattaching the content database (P.s. I have a back up of this database of approx. 4Gb from before I ran the install that has ruined the last two days of my life!!!)
    Kind Regards,
    AG06

    Solution...
    Over the weekend I was able to detach the Database, delete the original Web Application on Port 80.
    Reattach the Database to new WebApplication and extended it to my current URL.
    This was brilliant and it required minor config in terms of redeploying some custom solutions and WebParts.
    The result was perfect and it confirms that because SearchServerExpress (which is now working perfectly I may add after a new install which ran without errors) failed to finish its installation.
    P.s. I recommend that if you complete this, you back up almost everything you possibly can (as I did) - better to be safe than to be sorry.
    P.s.s. Before I deleted the original Web Application on port 80, I had tested my theory on a new Web Application on port 400 (any port is fine providing it is not being used). This illustrated to me that it would work - I didn't just go deleting Web Applications
    for the fun of it!
    SOLVED

  • SharePoint 2013 Enterprise with SP1 on Windows Server 2012??????? What am I missing?

    Hi there,
    As per MS - SharePoint 2013 Enterprise SP1 is compatible with Windows Server 2012 R2.
    I have Windows Server 2012 R2 installed - now it does not let me install SharePoint 2013 Enterprise (Standard without SP1).
    AND SP1 can ONLY be installed AFTER SharePoint 2013 Enterprise is installed.
    So how to install SharePoint 2013 Enterprise with SP1 on Windows Server 2012?
    Thanks.

    You can download it at the Microsoft Volume Licensing Service Center:
    https://www.microsoft.com/Licensing/servicecenter/default.aspx 
    or at the Microsoft Developer Network:
    http://msdn.microsoft.com/ 
    Please note that if you do not have access to either, you will have to work with the vendor who sold you SharePoint 2013 to get you a new ISO with SP1, or you will have to find a way to make a slipstreamed version on your own.  I'm really hoping you
    have VLSC or MSDN access, as this will make things much easier for you.

  • LDAP/AD Role group user login issue in sharepoint 2010 FBA with LDAP

    Hi.
    I created sharepoint 2010 site with LDAP FBA.If I add the AD user as form based user and try to login to my site its working very well but if I add a AD Group in to my site and try to login with one of the AD user of this group its say "Access
    Denied".
    In my project we want add AD group in sharepoin Groups not a individual AD users.
    Can anyone help me with this please its urgant?

    I added both LDAP membership and LDAP Role provider.And I can also find groups in people picker in my Central Admin and FBA Web app site colleciton.  
    <add name="ADMembers"
    type="Microsoft.Office.Server.Security.LDAPMembershipProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C"
    server="company.com"
    port="389"
    useSSL="false"
    userNameAttribute="sAMAccountName"
    userContainer="DC=company,DC=com"
    userObjectClass="person"
    userFilter="(|(ObjectCategory=group)(ObjectClass=person))"
    userDNAttribute="distinguishedName"
    scope="Subtree"
    enableSearchMethods="true"
    otherRequiredUserAttributes="sn,givenname,cn"
    />
    <add name="ADRoles"
    type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
    server="Company.com"
    port="389"
    useSSL="false"
    groupContainer="DC=Company,DC=com"
    groupNameAttribute="cn"
    groupNameAlternateSearchAttribute="samAccountName"
    groupMemberAttribute="member"
    userNameAttribute="sAMAccountName"
    dnAttribute="distinguishedName"
    groupFilter="(ObjectClass=group)"
    userFilter="(ObjectClass=person)"
    scope="Subtree" />

  • Beginning SharePoint 2010 Development with Visual Studio 2010

    I am a beginner with SharePoint 2010 development with Visual studio 2010. Please guide me for some good, practical videos tutorials and books which would help me get started with programming. I need to build some workflow in VS2010 in C#. Please help!

    Hi PinkRuby, 
    There are some good videos on the MSDN site that give a general overview of developing on the SharePoint platform. 
    http://msdn.microsoft.com/en-au/office/dn448488
    Another good resource is PluralSight. You need a paid subscription (though it's not much), but it has lot's of great video content for learning. 
    http://pluralsight.com/training/Courses#sharepoint
    Regards, Matthew
    MCPD | MCITP
    My Blog
    View
    Matthew Yarlett's profile
    See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
    Upload and Crop User Profile Photos

  • Office Web Apps - Preview Sharepoint 2010 documents in Sharepoint 2013 Search Results...again

    Hi,
    I found a thread in this forum With an answere to a similiar question here:
    http://social.technet.microsoft.com/Forums/en-US/28bc1e27-4a65-4c61-9b3e-cb9dad17f779/office-web-apps-preview-sharepoint-2010-documents-in-sharepoint-2013-search-results?forum=sharepointsearch&prof=required
    ...With the answere:
    "OWA uses an access token to talk to SharePoint 2013.  It cannot use this when talking to 2010.  In order to work with 2010, you have to create a custom display template that converts the file url to an openurl link. "
    BUT...
    may anyone give more information how to do this?
    Links to articles? Links to description and samples?
    jik

    Hi,
    According to your description, my understanding is that you want to preview documents from SharePoint 2010 in search results in SharePoint 2013.
    Per my knowledge, the Office Web Apps is configured to work with SharePoint 2013, so it will not work with documents in SharePoint 2010.
    I recommend to configure Office Web Apps to work with SharePoint 2010
    and make sure that documents can be previewed in SharePoint 2010 using Office Web Apps to see if the documents can be previewed in SharePoint 2013 search result.
    http://technet.microsoft.com/en-us/library/ff431687(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated

    Hi,
    When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated, I get the following unhandled exception:
    ************** Exception Text **************
    System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: Instance validation error: '2' is not a valid value for Microsoft.PerformancePoint.Scorecards.SqlReportViewData.SqlReportViewDataServerMode.
       at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write1_SqlReportViewDataServerMode(SqlReportViewDataServerMode v)
       at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write3_SqlReportViewData(String n, String ns, SqlReportViewData o, Boolean isNullable, Boolean needType)
       at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write4_SqlReportViewData(Object o)
       --- End of inner exception stack trace ---

    Hi,
    According to your post, an error occurred when you integrate SQL Server Reporting Services with SharePoint.
    1. Please check the steps as the link below:
    http://technet.microsoft.com/en-us/library/ff724283(v=office.14).aspx
    2. Try to clean the configuration cache on all of your SharePoint servers and re-tested.
    http://blogs.msdn.com/b/josrod/archive/2007/12/12/clear-the-sharepoint-configuration-cache-for-timer-job-and-psconfig-errors.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Office web Apps preview of SharePoint 2010 source in SharePoint 2013 search results

    Hi Team,
    We have crawled SharePoint 2010 source in SharePoint 2013 and able to get results successfully. Now our requirement is to show Office Web Apps previes of 2010 documents in 2013 search results.
    Any guidance on this please.
    Thanks,
    Manjeera

    Hi,
    Take a look at this blog post on how to do this: http://blogs.msdn.com/b/murads/archive/2012/10/11/utilizing-web-apps-2010-to-get-powerpoint-previews-of-sharepoint-2010-content-from-sharepoint-2013-search.aspx
    Thanks,
    Mikael Svenson
    Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • HT1848 I'm trying to sync my ipad mini with itunes and i get an error message '' there is no free space on your ipad mini''..... any ideas on how to empty some space on ipad mini manually? currently i run on 6.0.2

    I'm trying to sync my ipad mini with itunes and i get an error message '' there is no free space on your ipad mini''..... any ideas on how to empty some space on ipad mini manually? currently i run on 6.0.2

    iOS device backups are stored in your iTunes library.
    Move your iTunes library to an external drive.

  • Access 2010, Sharepoint 2010 issue with adding field to access db table

    I needed to add an additional field to one of my access tables contained in the sharepoint list. 
    My application is a front end Access DB (run locally), and the backend is the 'data' database contained in the sharepoint lists.
    I added the field to the database (called BOM).  When I open the access list (from sharepoint) , and also look at the database in access, the field is there and things are fine.
    However, it does not show up in my linked front end.  I deleted the linked sharepoint tables from my front end, and then re-imported.  Now I see the BOM field I created, but it has replaced the 'ID' field, which was the primary key.  I had
    added the 'BOM' field as the last field in the table.  Now it is the first field, having replaced the 'ID' field. 
    What's going on here? 
    Thanks in advance!

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office, and the issue more related to Sharepoint 2010, I'll move your question to the Sharepoint 2010 forum
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointgeneralprevious
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    George Zhao
    TechNet Community Support

  • How to populate a sharepoint 2010 list from the active directory. How to populate a sharepoint 2010 list with all sharepoint user profiles

    How to populate a sharepoint 2010 from the active directory.
    I want a list of all the computers in the active directory,
    another one with all users.
    I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
    Thanks
    sz

    While
    the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources.  Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
    information that are already in the system?  Now you can with a little InfoPath customization on the contacts list. 
    Here’s our plan:
    Create the contacts list, and open in InfoPath
    Create a data connection to the User Profile web service
    Customize the form adding some text, a people picker and a button
    Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
    Let’s get going!  Before we begin, make sure you have InfoPath 2010 installed locally on your computer.  I also want to give credit Laura
    Rogers and Darvish Shadravan’s book Using
    Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step.  I know it looks like a lot of steps, but it’s easy once you get the hang of it.
    So obviously we need a contacts list.  If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
    From the list, click the List tab on the ribbon, then click Customize form:
    So now we have our form open in InfoPath 2010.  Let’s add our elements to the form. 
    Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
    Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon.  This will add a column to the contacts list called group.
    Below the people picker, insert a button control from the same section of the ribbon as above.  With the button still highlighted, click the Control Tools|Properties tab on the ribbon. 
    Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
    You can drag the button control a little larger to account for the text.
    We should end up with something like this:
    Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
    Add a data connection to the User Profile Service
    Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
    For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL.  Click Next.
    Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
    For the operation, choose GetUserProfileByName.  Click Next.
    Click Next on the next two screens.
    On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
    Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
    Tell the form to read the user from the people picker control
    Click the Home tab on the ribbon.
    Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
    In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
    Leave the condition to default (none – rule runs when button is clicked).
    Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
    For Field, click the button on the right to load the select a field dialog.  Click the Show advanced view on the bottom.  At the top, click the drop down and choose the GetUserProfileByName
    (Secondary) option.  Expand myFields and queryFields to the last option and highlightAccountName.  Click ok. 
    For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
    connection as Main. Expand dataFields, then mySharePointListItem_RW.  At the bottom you should see a folder called group (the people picker control we just added to the form).  Expand this, then pc:Person,
    and highlightAccountId.  Click Ok twice to get back to the Rules pane.
    If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user.  So we need to tell the form what user to load the data for.  We take the AccountID field from the people
    picker control and inject into the AccountName query field of the User Profile Service data connection. 
    Load the user profile service information for the chosen user
    Click the Add button next to “Run these actions:”, and choose Query for data.
    In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
    We’re closing in on our goal.  Let’s see our progress.  We should see something like this:
    Now that we have the user’s data read into the form, we can populate the fields in the contact form.  The number of steps to complete will depend on how many fields you want to populate.  We need to add an action step for
    each field.  I’ll show you one example and then you will just repeat the steps for the other fields.  Let’s update the Job Title field.
    Populate the contact form fields with existing user’s data
    Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
    For Field, click the button on the right to load the select a field dialog.  Highlight the field Job Title.
    For Value, click the formula icon. On the formula screen, click the Insert Field or Group button.  Click the Show advanced view on the bottom. At the top, click the
    drop down and choose theGetUserProfileByName (Secondary) option.  Expand the fields all the way down until you see the Value field.  Highlight it but don’t click ok, but click the Filter
    Data button, then Add. 
    For the first dropdown that says Value, choose Select a field or group.   The value field will be highlighted, but click the field Name field
    under PropertyData.  Click Ok. 
    In the blank field after “is equal to”, click in the box and choose Type text.  Then type the text Title. 
    Click ok until you get back to the Manage Rules pane.  The last previous screen will look like this.
    We’re going to update common fields that are in the user’s profile, and likely from Active Directory.  You can update fields like first and last name, company, mobile and work phone number, etc.  For the other fields, the
    steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change.  Here’s what the rules look like when we’re done:
    We’re all done, good work!  You can preview the form and try it now.  Click Ctrl+Shift+B to preview the form.  Once you’re satisfied, you can publish the form back to the library.  Click File –> Quick
    Publish.  Once it’s done, you will get confirmation:
    Now open your form in SharePoint.  From the contact list, click Add new item.  Type in a name, and click the button and watch the magic happen!

  • Cloning SharePoint 2010 farm with everything same

    Hi,
    I have one SharePoint 2010 farm running live with SQL server 2008 R2. SharePoint is in one server, Active Directory is in one server and SQL database is in another server. I am creating a clone of the existing SP farm.
    I have created a private network where all 3 clone servers are connected (SP, SQL and AD). Before that, I have updated windows server 2008 R2 with latest updates and service packs. I have prepared the AD server, SQL database server and SP server within the
    private network with same name, same IP address and everything same as my production server where production server is live. I have installed SP and connected with SQL database and AD with only the configuration database i.e only Central Administration is
    running now.
    Now I am wondering what will be the next procedure to-
    1. Install Nintex Workflow, MS Office Webapps and other related software in SP server and update all with latest packs.
    2. How to deploy the SSL certificates.
    3. How to restore the farm database.
    4. How to update SP with latest packs OR any other issues may arise during this process.
    Because, i want to keep my production server live while I prepare the clone environment.  
    Please give some advice.
    Thanks in advance.

    Hi,
    I have restored the farm backup and trying to access my web applications. I have two web applications one is Extranet and another is Intranet with SSL. 
    When I request for Intranet:-
    It asks which authentication I want and display a drop down list where only Windows Authentication is there; there is no login prompt for AD users. 
    When I request for Extranet:-
    It shows An unexpected error occured.
    I get the following error in the event log-
    1.
    Error: RuntimeFilter: Failed to load all runtime filter configurations or the runtime filter component. Exception has been thrown by the target of an invocation.
    Event Type: Error
    Event Source: SharePoint Foundation
    Event Category: Devices
    Event ID: 6631
    Task Category: Web Parts
    User: NT AUTHORITY\IUSR
    2.
    Load Control Template file/_controltemplate/ManageCrawlRulesControl.ascx  failed. Thread was being aborted .
    For any request it takes huge time to load including the central admin page.
    Waiting for your guidance.
    Thanks.

  • Unable to check in PDF into SharePoint 2010 Enviroment with MetaData tags

    Hi we have a client that is modifying a PDF file and then wanting to update and check it back into our SharePoint 2010 enviroment.  We enforce a  MetaData (Term Store) Feild to this Document Library.  When Adobe trys to check in the file it bombs and freezes.  If we remove the feilds we are able to check in the document.   Attached is a screen shot of the Data Fields.   Its odd that Adobe Acrobat X adds a GUID at the end of the tag.   Is there currently a fix for this to allow adobe acrobat X to be able to check in the files with the MetaData Feild?  Also We have updated Adobe Acrobat X to the most current update.

    Hi ,
    It looks to be a case of indexer problem on your UCM environment . Enable indexer* tracing with full verbose and capture server output with a new excel file check-in .
    Thanks,
    Srinath

Maybe you are looking for