Trying to load 4Loot. I get an arrow pointing to the bar at the top of the screen...but there's nothing there to click on, like with Google Chrome.
I had to remove 4Loot because of an issue. When I try to reload it now I can't. The program points to the bar at the top of the browser, but unlike Google Chrome where there's a tier of three bars to click on and load 4Loot search engine...there's nothing on Firefox. Need help.
A Google search indicates that 4Loot is questionable software, so you may want to reconsider reinstalling it.
*http://www.2-spyware.com/remove-4loot-toolbar.html
*http://botcrawl.com/how-to-remove-4loot-search-virus/
If this is a search engine then it should be in the searchplugins folder in the Firefox profile folder or installed as an extension.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Unable_to_search_or_add_new_engines
Similar Messages
-
my iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if I leave it for a night on charge the charge icon will remain on the screen but there will be zero percent of battery. I tried five different charges and plugs [ one in the apple store], same result. Any suggestions please?
You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup -
I received an Apple Ipad air 2 on Jan 6, 2015. I cannot get it to come on today. It is fully charged and I only get a black screen. Help!
Had a similar problem with an Air 2. For some reason, the battery had gone to 0 from 50% overnight, locked and idle.
Apparently, plugging it in with a 0 battery takes about 15-20 minutes to get to a point where the screen will show anything (about at the 2% battery level).
I had tried everything else (reset, power off, ...). Be sure you're using an Apple charger and Apple cable and try plugging it in and waiting a while.
It's been OK for the last two weeks. -
I tried to upgrade to ios4 by plugging my Ipad into Itunes on my desktop. I got an error message as it was downloading. Now my Ipad won't turn on at all. All I get is a pic of the plug and an arrow pointing to the Itunes logo. I tried to reset, but nothing works. When I try to plug the Ipad into my desktop and access Itunes, my Ipad doesn't show up on the Itunes screen.
You need to restore your iPad using recovery mode and the process is covered in this article.
iPad: Unable to update or restore.
http://support.apple.com/kb/ht4097 -
hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.
I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8
-
My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hello all, I got my ipod two weeks ago and it was ok.However, whilst charging it yesterday, I was buying something from Amazon and all of a sudden a message came up on the computer screen that i tunes had been encountered a problem.Since then all I get on the ipod is a picture of the i tunes logo, and a picture of the cable, with an arrow pointing to the i tunes logo, as if ive got to plug it in.Also since this happened, ive downloaded songs, but am unable to load these on to my ipod as the line on my page which allowed me to do this has disappeared.HELP!!!!
The unit is in factory reset condition. Connect to a computer that is running ITunes.
-
I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work
So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again. -
I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?
iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603. I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November - any ideas ?
Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I tried to update my 4s to the latest ios6. itunes came back and said there was an unexpected error. the screen on the phone is hung showing a usb cable and an arrow pointing to the itunes icon. itunes does not see the phone as being plugged into my computer. I restarted itunes, no difference. I can't seem to reset the phone. It comes up with the apple icon and then goes back to the usb plug screen. I'm totally hosed right now!!!
Error 1604:
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
From Apple Support page >
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Lightroom opens fine initially, but when trying to open a different catalog it will go through the process but never reopen again. I can't get it to open at all until the computer is reset. I have been using Lightroom 4 for 18 months now and this problem just started happening in the last month.
No error messages. It acts totally normal but just never reopens when I try to reopen a new catalog. I create a catalog for each of my clients....I have done this since I started using lightroom as it seems tidy to me. But, I have never had this problem until now. I am using a pc and vista and Lightroom 4. Thanks.
-
I installed Lion on my newish 15" MacBook Pro. When using Calendar I click the corner arrow to enlarge the screen. Now ithe calendar is MORE than full size, no arrow visible to return to small size. The Menu bar doesn't respond. when I try grabbing it to move the whole screen sideways. When I sweep I get back to desktop. I can sweep back to the calendar, but can't make it small again. Menubar options include changing font size, but nothing about reverting to smaller window size. Any suggestions?
I installed Lion on my newish 15" MacBook Pro. When using Calendar I click the corner arrow to enlarge the screen. Now ithe calendar is MORE than full size, no arrow visible to return to small size. The Menu bar doesn't respond. when I try grabbing it to move the whole screen sideways. When I sweep I get back to desktop. I can sweep back to the calendar, but can't make it small again. Menubar options include changing font size, but nothing about reverting to smaller window size. Any suggestions?
-
I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this? I don't know what operating system it runs, or what year it was manufactured, it is a chrome one.
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Maybe you are looking for
-
My iPod isn't showing up on iTunes or on Windows
I broke my 30G iPod Video screen a while ago and I recently got a replacement screen and installed it. Now, my iPod screen won't come on or show up on iTunes or on the computer. What's the problem?
-
External HD not recognized after incorrect ejection.
I recently unplugged my external HD from power while it was plugged in to my MacBook, though my MacBook was closed. When I opened my MacBook, I was informed that the drive was incorrectly ejected. Now, my computer refuses to recognize the drive. I
-
Well, I got into DW quite a bit today. Spent lots of time figuring out how <br />to do things I do in GL.<br /><br />However, this one got me: I searched help to no avail. Does DW have a way to <br />automatically put the JS for the behaviors you use
-
Why does my iMAC display start jumping left and right by itself?
This refers to a 2011 27" iMAC upgraded from Snow Leopard to Lion. The upgrade seemed to go smoothly. Sometimes the display jumps back and forth horizontally for a few seconds. It moves about an inch or so, not just one pixel. While that's happening
-
Recover_cancel returns 0 although DB not yet shut down
While using a script to "feed" a shadow database with logs, we quite often see, that a recover_cancel is issued, dbmcli returns with 0 but if another log is available and db_admin is executed, it fails with >db_admin ERR -24783,ERR_WRONGDBSTATE: Oper