Trying to load SAP online documentation to SAP GUI

Hi -
I'm trying to load the SAP online documentation to the front end. I've put the "htmlhelp\helpdata\en" directory and sub-directories on our server. I've then go in and execute SR13 and have entered the following for the HTMLHELPFILE tab:
Variant : HTML Help
Platform: WN32
AREA: IWBTRAIN
Path:
zeus\public\documents
Language: EN
Default: <checked>
But, when I go to the help dropdown and choose SAP Library I get the following:
No documentation available
Message no. SH720
Diagnosis
Online documentation is not currently available.
Any ideas what I am doing wrong?
Thanks.

Update your Flash from Adobe's website.   If that doesn't work, tell the webmaster they aren't using a portable version of Flash that is as compatible with as many browsers as possible.
Please don't use all uppercase.  In internet etiquette it means you are shouting.

Similar Messages

  • I was trying to load an online game, and it said "Shockwave Player Error-to view movie, please switch to 32-bit mode." IT WOULDN'T WORK WHEN I TRIED IT! WHAT SHOULD I DO!  PLEASE HELP SOON!

    I was trying to load an online game, and it said "Shockwave Player Error-to view movie, please switch to 32-bit mode." IT WOULDN'T WORK WHEN I TRIED IT! WHAT SHOULD I DO!  PLEASE HELP SOON!

    Update your Flash from Adobe's website.   If that doesn't work, tell the webmaster they aren't using a portable version of Flash that is as compatible with as many browsers as possible.
    Please don't use all uppercase.  In internet etiquette it means you are shouting.

  • How to check the previous loaded SAP GUI patch number

    Hi
    now I am installing patch#24 SAP GUI ,now where to check the previous added patches,where I need to check, please mail the path

    Yes, Rolf is right.
    For every patch run there is a sapsetup<n>.log.
    Look at the file timestamp for the sequence.
    But what you see is a very indirect clue what you have installed.
    You see a very verbose installation protocol which is obviously targeted to developers of SAPGUI to troubleshoot installation issues...
    What they forgot to trace is the name of the patch file...
    The clues for the versions involved are texts like
      File version of source file is: 6405.5.24.1016
      File version of target file is: 6405.5.23.1016
    In this case I have updated 6.40 GUI Patch 23 to Patch 24
    HTH, Rudi

  • Error while Loading SAP portal on windows Vista

    I am getting the fowwloign error on step 36 out of 41 while trying to load SAP Portal /WAS on Windows Vista on my laptop.
    ERROR 2008-12-12 14:17:35.669
    FCO-00011  The step configSLDMainLocalImportContent with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalImportContent was executed with status ERROR .
    ERROR 2008-12-12 15:05:48.182
    CJS-30059  Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Connection refused: connect:: '.

    Hi,
    I believe VISTA is not a recomended OS for SAP Portal, I tried for a week to install and finally gave up
    check this
    Adventures with NetWeaver Portal 7 - Vista Installation
    jo
    Edited by: Ravi Joseph on Dec 12, 2008 11:51 AM

  • Which user is supposed to install the online documentation?

    Hi -
    I am trying to install the online documentation (post install step of solution manager). I am logged in as sap* and have run transaction SR13, but after entering in the values for variant, platform, area, path and language, I try to save the data, but SAP Gui tells me that "No changes for user SAP* allowed"  "Changes cannot be made, display user only". (Message no. TR026)
    Is there another user that I should be using for this?

    Check the new guide that was uploaded in http://service.sap.com/solutionmanager => Media Library => Documentation => How to Install SAP Solution Manager Documentation

  • Store Business Document via SAP GUI for HTML

    We are trying to use SAP GUI for HTML via UWL in Portal to deliver Workflow. When we try to attach files for the "Store Business Document" step, it gives an informational message "Store business document Access via 'NULL' object reference not possible"  but the documents themselves never get attached. We are on ECC 6.0 and Portal 7.0. Any help is greatly appreciated.
    Thanks!
    - Rao

    I've found a working solution a minute ago: See SAP Note: 510007
    Best regards
    Danny

  • SAP GUI for HTML

    Hello Everyone,
    I have successfully implemented XSS on our portal. Also, UWL is configured and working correctly. However, upon trying to access SAP GUI for HTML through the UWL, I get an error. This is an example of an error:
    Transaction SWNWIEX+CURRENTWINDO is unknown
    This is when clicking the link of a PCR request in the tracking tab of the UWL. It opens SAP GUI for HTML in a new window using the UWL - Launch SAP Transaction iView.
    Does anyone have any idea why this happens?
    Regards,
    Motaz

    Hello Motaz,
    First of all, you are welcome to join the ITS/WEBGUI forum [here|Internet Transaction Server (ITS);.
    About your issue, I am not sure about the SAP_BASIS version of your system, but maybe SAP note 1360904 is the solution!
    At last, but not least, you may find [this Wiki article|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22375] interesting.
    I hope this helps.
    Best regards,
    Cristiano

  • Problem in installing sap gui 7.1?

    hi all,
    i am trying to instal sap gui 7.1 from my official website ....
    but while installing its givina a mesage..
    microsoft .net framework 2000 needed to intsal before installing sap gui 7.1..
    now i first uninstalled the old spa gui and tried to reinstal the new one but still it gave the same message..
    now i went to microsoft website and searched for microsoft .net framework 2000
    but many options are coming....my os is microsoft 2000..
    can you plis tell me which one to install....( which option from microsoft website)...

    Hi,
    We didn't apply SAP setup patch 12 which is a pre-requisite for applying patch level 57. Now it is working fine. Anyway, thank you for your guidance.
    Thanks,
    Sharmila

  • Unable to install SAP GUI 710

    Hi,
    I am trying to install SAP GUI 710 on my system which has Windows Vista as the OS. I have downloaded 3 zip files from the SAP Market place. They are
    50083078_2.zip
    50083078_4.zip
    50083078_5.zip.
    None of these zip files contain the .exe file which will help me in installing the SAP GUI.
    Let me know if there is any other link to download the GUI files.
    I do have SAP GUI 470 on my system now.
    Thank you in advance.
    Shankar.

    Hi Dieter,
    You are right that there are .exe files in that folder. But when I try to execute them, it says that the exe file NWSAPSETUP.exe is not present in its respective folder. And after that the execution stops.
    I doubt that there is something else which i need to do, can you please forward me or let me know the steps involved in implimenting the SAP GUI 710.
    Thank you in advance.
    Regards,
    Shankar.

  • Problemin installing SAP GUI 7.10 Patch level 11

    Hi,
    I am trying to install SAP GUI 7.10 FRONT END components on windows vista but it is giving the problem that
    patch level 11 is not present . We are using the SAP ECC Version 6.4 and i want to install SAP ECC 7.10
    front end components on windows vista but it giving the problem .
    Plzz provide me guidelines tosolve this problem.

    Hello
    please download the compialtion 3 cd of sapgui 710.
    http://service.sap.com/installations
    Entry by Application Group
    SAP Frontend Components
      SAP GUI FOR WINDOWS
       SAP GUI FOR WINDOWS 7.10 CORE
        Installation
    Compilation 3 cd is delivered with the sapgui patch level 11!
    Also the sapgui patche you can find in
    http://service.sap.com/patches
    Best Regards
    Sven

  • SAP CE 7.2 works fine is it possible to use sap gui with this version ?

    Hello Dears,
    Just installed CE7.2,
    Very easy install thanks for SAP !!!
    Is it possible to use sap gui with this version ?
    I'm trying to use Sap Gui 7100.3.11.1042 but can't get the prompt.
    Thanks for you help.
    Olivier

    Hello,
    So I tried to find the right software but I found only B1DESetup_2.1.zip.
    https://downloads.sdn.sap.com/BusinessOne/B1DESetup_2.1.zip
    Do you have any idea about the right link to download or this is the right file ?
    Thanks
    Olivier

  • Installing SAP online documentation and integrating with SAP.

    bold Dear all
    I am trying to integrate SAP library with CRM server.
    I have followed the steps mentioned in the Online documentation CD ( Read me and online
    documentation PDF fils).
    I am trying to install HTMTHelp library.
    I have followed the following steps :
    1.  Copy the directory Htmlhelp\Helpdata\<language key> with all its subdirectories
         from the DVD to the documentation directory on the server.
    Later defined the setup variants.
    1 . T.code SR13
    2 . select the HtmlHelpFile tab page.
    Switched to the change mode and entered the following details :
    Variant = saphelp
    platform = windowsNT
    Area     = IWBHELP
    Path      = c:\sapdcoument\HTMLHelp
    Language = EN
    Defaul = enable
    I have saved the changes and it asked me to create the change request.
    i have made these changes in the client 000 ***
    When i click on the Help -> Application help or SAP library under the help menu
    it is giving me the error " No Documentation available ".
    Could some one help me with this.
    Regards
    Kiran

    Dogboy49
    I have shared the helpdirectory which is located on the server and
    it is accessible in the network from all the PC ( frontend ).
    But when i try to accesss it is throughing an error and when i look
    in the SAPDOCCD log file located in the Windows directory i find this error.
    I am posting the SAPDOCCD file. kindly suggest if you have any solution
    Program path =     C:\Program Files\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
    SHH version  =     7.1.0.4
    Command line =     
    "TYPE=5&SERVER=&PATH=
    idescrm\SAP\CRM\HELPDATA\EN\EN&SYSTEM=CRM&_CLASS=IWB_STRUCT&_LOIO=
    &_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=500&IWB_COUNTRY=&IWB_INDUSTR
    Y=BBPCRM&_SCLASS=IWB_STRUCT&FRAME=X"
    Info:          --- Default settings from command line ---
    Info:          HelpType=HtmlHelpFile
    Info:          HtmlHelpFilePath=
    idescrm\SAP\CRM\HELPDATA\EN\EN
    Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
    Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program
    Files/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program
    Files/SAP/FrontEnd/sapgui/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini"
    Warning:     Could not read any profile
    Info:          --- Starting HtmlHelp ---
    Info:          CHM file="
    idescrm\SAP\CRM\HELPDATA\EN\EN\e18e5134\1a06084d\e1000000
    \9b38f83b\frameset.chm"
    Info:          HTM file=""
    Error:          Could not find file "
    idescrm\SAP\CRM\HELPDATA\EN\EN\e18e5134
    \1a06084d\e1000000\9b38f83b\frameset.chm" *
    Regards
    KiranKumar
    Edited by: kiran kumar on Feb 25, 2008 7:40 AM

  • DBD: An error occurred while trying to load the provider for transport sap.

    Hi,
    I just installed the BO XI 3.1 SP2 & SAP integration KIT 12.0 and could able to import all the roles from SAP client in BO CMC.But when i am trying to create new Universe & creating a connection to SAP it is throwing an error " DBD: An error occurred while trying to load the provider for transport sap.System error message:The specified module could not be found ".
    I even applied FIX packs 1.7 & 1.8 for both BOXI 3.1 & SAP Integration KIT,but still throwing the same error.
    Could any please help me out in this issue.
    Thanks in advance,
    Sanjay

    Hi,
    this looks like a Bug:
    Check SAP Note - 1365062
    I would recommend installing SP2 for BOXI 3.1
    Regards
    -Seb.

  • Configure sap library-online documentation in EHP4 system

    Hi,
       How to configure SAP Library - Online Documentation on (EHP4 systesm) OS level.
    Thanku

    Via SR13 as in any other version... read the documentation.
    Regards
    Juan

  • I tried to connect SAP BW7.0 with use Jco2.1.7...

    I tried to connect SAP BW7.0 with Jco2.1.7(64bit Itanium) in Microsoft Windows 2003 on IA64 and x86_64 with SUN JSE 1.4.2 (64-bit VM).
    But I got error as followings.
    java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjcorfc in java.library.path]. java.library.
    path [C:\fds2\jrun4\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WI
    NDOWS;C:\WI
    what's wrong?
    one more question
    What is the "Microsoft C runtime libraries version 7"?
    Message was edited by: kooknam han

    Hi,
    I think it's not possible to create a Universe directly on ECC 6.0.
    You need to use a Data Federator for this to work. A Data Federator view is created on top of the ECC source using the connector then you can create Universe on top of Data Federator.
    Check the below for more info on the same.
    SAP BusinessObjects Web Intelligence Reporting for SAP ERP
    Data Federator Installation Guide:
    http://help.sap.com/businessobject/product_guides/boexi3SP1/en/xi3_sp1_df_install_en.pdf
    User Guide on Data Federator:
    http://help.sap.com/businessobject/product_guides/boexi3SP2/en/xi3_sp2_df_userguide_en.pdf
    Hope it helps.
    Regards,
    Raghu

Maybe you are looking for

  • How can I batch process CR2 raw files to tif's without losing color adjustments?

    Working in BRidge and Photoshop CS6: I have 160 color adjusted hi-res CR2 RAW files from my photographer, thought I was getting tifs. I need tifs for my INdesign file. I tried using the photoshop image proecessor through brige by selecting all my ima

  • How do I fix a charger that has been used on an incompatible device?

    I lent my charger to a friend, and when I got it back it started acting up. First it told me to reset my Ipod in Itunes, but before I could it suddenly refused to show up anywhere on my computer. It doesn't even register as a blank disk, and it doesn

  • My £2000 MacBook Pro 17'' is falling apart???!!!

    I gave the case, keyboard and screen a wipe down with a dry lint free cloth earlier and am shocked!!! There is a thin silver bar runing along the bottom of the keyboard, its painted SILVER - why, this area must get a hammering and my machine is 4 wee

  • Select from internal table

    Hi, i need to select data from some internal table. data : wa_vcera type /BIC/ASUSP00 . "VCERA" is not defined in the ABAP Dictionary as a table, projection view, or database view. What should I do? Thanks    Radka

  • What program uses to create transparent images?

    I use paint shop pro 5, selecting the zone of image that the program must show, and saving it as alfa channel. But in Samsung E800 it does not funcion, it shows images in a rectangle. Perhaps could be because paint shop pro is too old? what program u