Trying to maintain consistent field orders.

is 1080i30 lower field first blu-ray legal? trying to do a menu lead in for blu-ray that is all after effects graphic animations, and then an SD video in 480i30 lff. i figured i could do the whole thing from top to bottom LFF, but noticed that all the presets for HD are UFF, does it matter? can i do 1080i30 LFF for disc legal? i susally avoid these complication, but basically i have to do it with this project.

Do your encoding prior to importing into Encore.
Does not matter which field is used, Encore does not re-encode.

Similar Messages

  • Field Order on Final Burn

    Hello,
    What I did. I made video in PP CS3. Exported to mpeg-2 using adobe media encoder. Made dvd from adobce encore cs3. I then deleted the original dv-avi (need to buy more storage but didn't have time); DVD Played fine no problems; I then saw I needed to fix an error. So I only had the mpeg-2 file. Went back in PPcs3 and fixed the error. Used Adobe media encoder again to export as mpeg-2 again all default didn't change field order. When I compile the DVD the second time around in Encore cs3 the dvd plays back like I chose to do upper field first this time. Fast motion is strobe like.
    Does re-encoding an mpeg-2 file cause problems??
    Any suggestions or comments would be great for this newbie.
    Thanks

    Burning to DVD would not cause this to occur.
    Recompressing to MPEG-2 is the most likely the source of the trouble. It sounds as simple as the field order not matching. You could start by trying to find the field order of the source and the MPEG-2 setting.

  • Maintaining min sales order value

    Hi,
    I am trying to maintain minimum sales order value of Rs 500,if not order should not be created . please help me.
    thank you,
    pranay

    Dear pranayreddy,
    You can use these 2 condition type AMIW and AMIZ.
    For these you need to maintain the condition records for reference condition type.
    You can set the value in the condition record, if the sales order value is not reached against the condition record value then system will add the rest of the amount and showing it as a surcharge.
    I hope with this process you can't stop the order to be created.
    Check and revert
    Thanks&Regards
    Raghu.k

  • Fields need to be maintained in Sales order

    Hi gurus,
           I wan to maintain two fields in sales order, one is agent(middlemen who facilitate sales) and companies sales representative fields for 3 respresentatives. Anyway these two were defined in Partner functions and assigned to account group. I want these  person names to display in sales order since these persons will get commission on their sales. And also pls let me know how to assign commission amount to theim , do i need to create any seperate G/L account.
    (I will create condition type to maintain condition records for each sales representative and agent seperately)
    waiting for reply, pls help
    Regards

    To have these partners show up on the sales order, you need to assign them to the sales order header partner determination routine.
    You can use an accrual condition to compute and account for a commission. If you have different rates for different sales reps, you will probably need to add the partners to the SD pricing communication structure - which requires a little bit of ABAP coding.
    In terms of needing a different G/L account for commissions payable: in all likelihood you will. However, this is normally an accounting policy decision.

  • Maintain z-field in VBEP in SD Order processing

    Hi,
    i have to add a CHAR field to VBEP which has to be maintainable within Sales order processing.
    I found the additional fields DYNPROS for Order Header and Order item.
    How can i add now my VBEP field for UI input?
    User would prefer the VBEP table control for direct input.
    BR

    I searched on this some time ago and found that it's not feasible to add custom fields to VBEP by using any of the "kosher" methods. We ended up creating a custom transaction to maintain additional data in a Z table.
    Not sure if this is feasible by using some hardcore modification, but this option just wasn't acceptable for us, so we didn't explore that.

  • Motion and Field Order Stupidness

    I'll try not to rant too much.
    But what is up with Motion and working with DV NTSC video with fields? I have had nothing but headaches. I am a long time After Effects user, and I was glad to get Motion 2 (2.1.2), but I've just spent the last hour and half trying to get it to render DV NTSC video correctly without it getting field jitter on a project that needed to be over-nighted to go on the air. And it still doesn't look totally correct. (I'm not a happy camper)
    Here's the deal, I took DV captured footage from FCP using the standard DV/DVCPRO - NTSC preset I've used forever. That footage was imported into a Motion project that was using its own NTSC DV project preset (all lower fields -even). But every time I'd play it back in Motion, or render it out (still using the NTSC DV render preset), I get serious field jitter on DV output.
    Eventually I found under the Inspector-Media tabs that the footage was imported as Field Order- None (why I have not a clue). So I changed all the footage to Lower (even). That worked on any footage where size, rotation, or position was not changed. If any of those attributes was changed I get the field order jitter. It seems to me that Motion is not able to render out field ordered video properly and the quality looks poor or jittery.
    Now that might seem hasty to say that, but I've been doing the same thing in AE for years, never having to change the imported field order to get it to look right and I have always captured, imported, work with projects and rendered using the QT DV/DVCPRO - NTSC presets.
    Can someone help me because I can not believe I've had to change so many setting to try to get video to look right from Motion while using the same settings during the entire workflow.
    Thanks, and sorry for the rant.
    PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4   Mac OS X (10.4.7)  

    Hey, thanks for the replys.
    [....you might want to try using the animation codec..millions of colors...]
    I gave that a shot this morning, and I'm having the same problem. See what's going on now is after changing the Field Order to even for the footage media, all of it looks decent except for the ones on an angle, croped or resized and I see this in both Motion's preview and the final render when I play it back in FCP. So as per your suggestion I rendered with the animation codec (filed rendering) and it still has it. Its just odd to me that it does that, like I said before I've worked in the DV/DVCPRO - NTSC codec with FCP and AE for years with no quality degrade. The reason I have always do that is that's what I capture to and that what my FCP project is so to keep it all consistant. BTW, this is going network and cable, no different than I usually do.
    [...are you enabling field rendering in the Canvas or in the export settings?]
    Yes I am, sorry, I should have pointed that out. I have done combinations of different QT codecs with and without field rendering turned on to see different results. None of course resolves this issue.
    Thanks
    PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4   Mac OS X (10.4.7)  

  • Trying to create a sales order in CRM with BAPI_BUSPROCESSND_CREATEMULTI.

    hi all,
    I am trying to create a sales order in CRM using the BAPI BAPI_BUSPROCESSND_CREATEMULTI.
    I need the sales order number as the out put. So I am declaring OBJECT_ID as the export parameter.
    This is my source code, I donu2019t get an error, but the sales order is not generated and I donu2019t get any output for my export parameter OBJECT_ID.
    I am setting the tables HEADER,ITEM ,SALES,PARTNER, ORGANISATION, RETURN and
        SCHEDULELINE in BAPI_BUSPROCESSND_CREATEMULTI. But still unable to display the sales order number. Please help me with information
    This is my code
    ***********************************Define the Internal Tables*************************
    DATA: IT_HEADER TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS WITH HEADER LINE.
    DATA: IT_SALES TYPE STANDARD TABLE OF BAPIBUS20001_SALES WITH HEADER LINE.
    DATA: IT_ITEM TYPE STANDARD TABLE OF BAPIBUS20001_ITEM WITH HEADER LINE.
    DATA: IT_SCHEDULELINE TYPE STANDARD TABLE OF BAPIBUS20001_SCHEDLIN WITH HEADER LINE.
    DATA: IT_PARTNER TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS WITH HEADER LINE.
    DATA: IT_ORGANIZATION TYPE STANDARD TABLE OF BAPIBUS20001_ORGMAN_INS WITH HEADER LINE.
    **Values for Internal Table IT_HEADER**
    IT_HEADER-PROCESS_TYPE  =  'YWEB'.
    IT_HEADER-DESCRIPTION   =  'Web Order'.
    IT_HEADER-POSTING_DATE  =  'SY-DATUM'.
    IT_HEADER-CREATED_BY    =  'SY-USER'.
    APPEND IT_HEADER TO IT_HEADER.
    **Values for Internal Table IT_SALES**
    IT_SALES-PO_NUMBER_SOLD = '1'.
    APPEND IT_SALES TO IT_SALES.
    **Values for Internal Table IT_ITEM**
    IT_ITEM-NUMBER_INT  =  '20'.
    IT_ITEM-ORDERED_PROD  =  '50000180'.
    IT_ITEM-ITM_TYPE  =  'ZABC'.
    APPEND IT_ITEM TO IT_ITEM.
    **Values for Internal Table IT_PARTNER**
    IT_PARTNER-REF_PARTNER_NO  =  '100000620'.
    IT_PARTNER-REF_PARTNER_FCT = 'CRMH04'.
    APPEND IT_PARTNER TO IT_PARTNER.
    **Values for Internal Table IT_ORGANIZATION**
    IT_ORGANIZATION-SALES_ORG = 'O 50000100'.
    IT_ORGANIZATION-DIS_CHANNEL = '30'.
    IT_ORGANIZATION-DIVISION = '80'.
    APPEND IT_ORGANIZATION TO IT_ORGANIZATION.
    **Values for Internal Table IT_SCHEDULELINE**
    IT_SCHEDULELINE-QUANTITY  =  '2.268'.
    APPEND IT_SCHEDULELINE TO IT_SCHEDULELINE.
    **Call BAPI_BUSPROCESSND_CREATEMULTI for creating a sales 0rder******
    CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
      TABLES
        HEADER                  =  IT_HEADER
        ITEM                    =  IT_ITEM
        SALES                   =  IT_SALES
        PARTNER                 =  IT_PARTNER
        ORGANISATION            =  IT_ORGANIZATION
        RETURN                  = IT_RETURN1
        SCHEDULELINE            = IT_SCHEDULELINE.
    ****************CALL COMMIT WORK**********
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
        WAIT          = 'X'
    IMPORTING
       RETURN        =  IT_RETURN2.
    ENDFUNCTION.
    Edited by: jessica sam on Dec 10, 2008 1:45 AM

    Hi am getting the sales order but the item data is not available in sales order. Also should I generate a new guide always for HEADER, ITEM, PARTNER, ORGANIZATION, SCHEDULELINE,u2026u2026for the tables that I use?
    I  mean do I need to create a new guide each time for all the tables that I use and finally pass only header guide to the  bapi 'BAPI_BUSPROCESSND_SAVE'.
    I donu2019t know why I am not getting the product data in the saved sales order please help me.
    this is my code
    ***TABLES
    DATA: IT_HEADER TYPE TABLE OF BAPIBUS20001_HEADER_INS.
    DATA: IT_INPUT_FIELDS_FILL TYPE TABLE OF BAPIBUS20001_INPUT_FIELDS.
    DATA: IT_ITEM TYPE TABLE OF BAPIBUS20001_ITEM.
    DATA: IT_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS WITH HEADER LINE.
    ***WORK AREA
    DATA: WA_INPUT_FIELDS TYPE BAPIBUS20001_INPUT_FIELDS.
    DATA: WA_HEADER TYPE BAPIBUS20001_HEADER_INS.
    DATA: WA_ITEM TYPE BAPIBUS20001_ITEM.
    DATA: IT_EV_GUID_32 TYPE GUID_32.
    DATA: IT_EV_GUID_32_1 TYPE GUID_32.
    *Create GUID
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        EV_GUID_32       = IT_EV_GUID_32.
    * Fill the HEADER
    WA_HEADER-GUID                      =  IT_EV_GUID_32.
    WA_HEADER-PROCESS_TYPE              =  'ZWEB'.
    WA_HEADER-DESCRIPTION               =  'WEB ORDER'.
    WA_HEADER-CREATED_BY                =  'jiopidn'.
    APPEND WA_HEADER TO IT_HEADER.
    *For each FIELD of HEADER fill INPUT_FIELDS
    WA_INPUT_FIELDS-REF_GUID               =  IT_EV_GUID_32.
    WA_INPUT_FIELDS-REF_KIND               =  'A'.
    WA_INPUT_FIELDS-OBJECTNAME             =  'ORDERADM_H'.
    WA_INPUT_FIELDS-LOGICAL_KEY            =  '1'.
    WA_INPUT_FIELDS-CHANGEABLE             =  ' '.
    WA_INPUT_FIELDS-FIELDNAME              =  'PROCESS_TYPE'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    WA_INPUT_FIELDS-FIELDNAME              =  'GUID'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    WA_INPUT_FIELDS-FIELDNAME              =  'DESCRIPTION'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    WA_INPUT_FIELDS-FIELDNAME              =  'CREATED_BY'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    *Create your own GUID
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        EV_GUID_32       = IT_EV_GUID_32_1.
    * Fill the ITEM
    WA_ITEM-GUID              =  IT_EV_GUID_32_1.
    WA_ITEM-NUMBER_INT        =  '10'.
    WA_ITEM-ORDERED_PROD      =  '000000000070000000'.
    WA_ITEM-ITM_TYPE          =  'ZTAN'.
    WA_ITEM-MODE              =  'A'.
    APPEND WA_ITEM TO IT_ITEM.
    *For each FIELD of ITEM fill INPUT_FIELDS fields
    WA_INPUT_FIELDS-REF_GUID               =  IT_EV_GUID_32_1.
    WA_INPUT_FIELDS-REF_KIND               =  'A'.
    WA_INPUT_FIELDS-OBJECTNAME             =  'ORDERADM_I'.
    WA_INPUT_FIELDS-LOGICAL_KEY            =  '1'.
    WA_INPUT_FIELDS-CHANGEABLE             =  ' '.
    WA_INPUT_FIELDS-FIELDNAME              =  'GUID'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    WA_INPUT_FIELDS-FIELDNAME              =  'NUMBER_INT'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    WA_INPUT_FIELDS-FIELDNAME                 =  'ORDERED_PROD'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    WA_INPUT_FIELDS-FIELDNAME                 =  'ITM_TYPE'.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS_FILL.
    REFRESH: CREATED_PROCESS.
    ***** CALL BAPI_BUSPROCESSND_CREATEMULTI
                   CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
                     TABLES
                       HEADER                  = IT_HEADER
                       ITEM                    = IT_ITEM
                       INPUT_FIELDS            = IT_INPUT_FIELDS_FILL
                       CREATED_PROCESS         = CREATED_PROCESS
                       RETURN                  = RETURN.
    IT_OBJECTS_TO_SAVE-GUID = IT_EV_GUID_32.
    IT_OBJECTS_TO_SAVE-OBJECT_TYPE = 'BAPIBUS20001'.
    APPEND IT_OBJECTS_TO_SAVE TO IT_OBJECTS_TO_SAVE.
    **** CALL 'BAPI_BUSPROCESSND_SAVE
    CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
      EXPORTING
        UPDATE_TASK_LOCAL       = true
        SAVE_FRAME_LOG          = true
      TABLES
        OBJECTS_TO_SAVE         = IT_OBJECTS_TO_SAVE
        SAVED_OBJECTS           = ITAB_SAVED_OBJECTS
        RETURN                  = itab_return.
    **** CALL BAPI_TRANSACTION_COMMIT
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
        WAIT = true
      IMPORTING
        RETURN = RETURN1.
    Edited by: jessica sam on Dec 12, 2008 3:50 AM

  • Need to setup Premiere CS6 sequence for two file types with different field orders

    I have a client who has shot video for me using two cameras, one camera was set to progressive, and the other to interlaced upper field first. I need to use both file types in the edit and have been struggling to set up the sequence to get the best look for the end product, a DVD. I have several videos to do for her that were all shot in the same way, so I need a solution!
    I would appreciate help figuring out how to set up this work flow from beginning to end.
    Should I convert one of the files from the beginning so they match field orders before going into a sequence? Or do I just need to do some adjusting of the files once they are in the sequence? Is it just as simple as changing the transcode settings to favor the upper field first? I'm definitely having issues once the video is transcoded in Encore and you can see a lot of jagged edges and lines especially during movement. My client isn't happy and I've tried several workarounds, but to no avail.
    Here are the two file types I have:
    File extension: .MOV
    H.264, 1920x1080, Linear PCM, 16 bit little-endian signed integer, 48000 Hz, stereo
    FPS 29.97
    No Fields: Progressive Scan
    File extension: .MTS (my Mac finder can't read these files, but they are read in Premiere)
    Image Size: 1920 x 1080
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - compressed - 6 channels
    Pixel Aspect Ratio: 1.0
    Upper Field First
    I am using Adobe Premiere CS 6.0.2
    Encore 6.0.1
    Media Encoder 6.0.2.81
    I am running it on an iMac 27-inch, Mid 2011
    with Mac OS X Lion 10.7.5
    Processor  3.4 GHz Intel Core i7
    Graphics  AMD Radeon HD 6970M 1024 MB
    I've just been setting the sequence to match the .MOV files since they look much better than the .MTS files. I've done the opposite as well, setting the sequence to match the .MTS files and it doesn't seem to help. I've also changed the field order of the files once they are in the sequence by changing the field options and have tried converting the .MTS files in the Media Encoder, but nothing I've done has worked.
    Any help would be so appreciated! The client I have is a photographer, so she wasn't aware of this issue when she first shot these videos. So I have 10 videos with these issues I need to get back to her, hopefully issue free! I'm struggling as an editor because my last job I was using FCP and was working with videographers who knew what they were doing, so I've never faced such problems before. Plus I'm new to the Adobe software. Not a good combination. Please forgive me if I didn't give all the information you need. I will happily respond with whatever more information you may need to help me out!
    ~KTrouper

    I wonder if you could do your edit ignoring any visual issues of the interlaced footage but keeping the different sources separate ( checkerboard edit Vid 1/ Vid 2 )
    Lock it down then export the interlaced part of the edit as a Digital Intermediate.
    Maybe Export the other source as well to the same codec. DI
    Bring them back together in a New Sequence. You wold have to deal with the black spacing.

  • Dumps when trying to Maintain master data

    Hi All,
    When we are trying to Maintain master data for a master data object 0WBS_ELEMT, we are getting a short dump "CALL_FUNCTION_NOT_FOUND" in our BI 7.0 system.
    What we are doing is Right click on 0WBS_ELEMT info object and Maintain master data, then we get the above dump. Saw in one of the forums that by making the info object in active and activating it again it will solve the issue but even after doing this the issue still persists, we still get the dump. Would need help from all of you.
    regards,
    Suman Pitta

    Hi Suman,
    The dump is due to the fact that 0WBS_ELEMT has an attribute which still
    uses the POSID conversion exit. Attribute 0PROG_POS should use
    conversion exit POSBW. And in fact, in RSD1 of this infoobject, POSID is
    Still maintained. However, if you go to the DDIC object in SE11
    (SE11 -> choose "Domain" -> /BI0/OPROG_POS -> Display), you will
    see that the conversion routine POSID still appears. This is the reason
    you get the dump.
    In order to resolve this issue, go to RSD1 -> enter infoobject
    '0PROG_POS' -> choose maintain -> Set object status to inactive and
    reactivate the InfoObject. The reactivation should regenerate the DDIC
    objects (you can check this in SE11 again).
    Alternatively change to the version from content which utilises POSBW
    already.
    regards,
    Colin

  • In IPhoto 11 I have made an album and rearrange the photos in the order I require them. When export the album to allow me to burn them to disk to be viewed in Windows they do not maintain the same order. What am I doing wrong?

    In IPhoto 11 I have made an album and rearrange the photosin the order I require them. When export the album to allow me to burn them todisk to be viewed in Windows they do not maintain the same order. What am I doingwrong?

    When you sort the Album in iphoto are you sorting manually? Or by date of the photos?
    When you sort in the Finder how are are you sorting?
    Here's one way to do what you're trying to do:
    Create your Album and sort the pics as you want them. Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the Finder and you end up with a folder full of images in the same order as the Album in iPhoto.
    Regards
    TD

  • HDV, ProRe, and field order

    Hi all.
    I'm having a field order issue. I have many Quicktime movies in HDV 1080i60. I am trying to convert these to ProRes LT for editing, and then encode the result with a compressor preset for DVD.
    If I use the ProRes LT for interlaced material preset, everything seems fine until I encode that to mpeg2. Compressor detects the ProRes file as interlaced, and I have frame controls off for the mpeg conversion. But the field order appears wrong upon viewing; it appears right if I change the native field dominance to "progressive" before encoding to mpeg2.
    So can anyone tell me why the ProRes behaves as if it is always progressive? I can't figure out what is missing.
    Thanks.
    Jeremy

    Hi all.
    I'm having a field order issue. I have many Quicktime movies in HDV 1080i60. I am trying to convert these to ProRes LT for editing, and then encode the result with a compressor preset for DVD.
    If I use the ProRes LT for interlaced material preset, everything seems fine until I encode that to mpeg2. Compressor detects the ProRes file as interlaced, and I have frame controls off for the mpeg conversion. But the field order appears wrong upon viewing; it appears right if I change the native field dominance to "progressive" before encoding to mpeg2.
    So can anyone tell me why the ProRes behaves as if it is always progressive? I can't figure out what is missing.
    Thanks.
    Jeremy

  • PE4 File Export giving wrong field order

    In PE4, when I execute File-Export with the following settings:
    General/File Type: Microsoft DV AVI
    Video/Compressor: DV PAL
    Keyframe and Rendering/Fields: Upper Field First
    It creates the AVI OK, but GSPOT shows that the AVI is Lower Field First, not Upper Field First as specified in the settings.
    Why?  Is this a bug or does selecting DV force LFF (if so, then why isn't the UFF option greyed out in the settings?).
    What I am trying to do is create some smaller sub-projects in the form of AVI's, which I will eventually import into a final large project.  The source files for the subprojects are mpgs from an HD camcorder, so they are Upper Field First (UFF), and so I am using the PAL Harddisk project preset, which expects source files to be UFF.
    Since my final project will include both UFF mpgs and those AVI subprojects, I want the AVIs to be UFF also, so that I don't have to selectively reverse field orders etc.
    Is this wrong?
    Thanks
    Dave

    ==> "You can even use Premiere Elements for the conversion by applying field order reversal and then exporting to DV-AVI."
    Splitting hairs I know, but again to clarify for me:
    For the initial conversion to DV-AVI, if I start a project in PE4 with a UFF preset, bring in my UFF mpgs, then export to DV-AVI (WITHOUT applying field order reversal), is this doing the same as what you suggest?  That is, in this case, the field reversal is taken care of by PE4 behind the scenes because I told it to do so by using a UFF preset?  Or do I still need to manually reverse the fields?
    Sorry to be dense, but there seems to be many ways to do the same thing, and I'm trying to figure out the simplest and least error prone way to do it.
    Dave

  • Field order issues after export to DV Pal from uncompressed

    We are experiencing some difficulty exporting clips from FCP to our Omneon Server for TX.
    We are capturing 8 bit uncompressed (AJA and Blackmagic) from digibeta for our edit and all editing stays in uncompressed until final output. Our transmission system demands DV PAL files so we export finished items as DV PAL in FCP and drop onto the server
    Our problem is that on playback from the server, the field order is incorrect. Although the exported DV clips properties show lower field order, the clip is obviously playing upper field first. If we capture and edit in DV and export the DV file to the server, then we have no problems. I have tried
    exporting uncompressed clips to DV via Compressor and changing the field order in frame controls but no success. It seems that when a clip is captured and edited in upper field it hangs onto that status even after conversion to DV!! Any thoughts greatly appreciated!

    when you drop one of your 8 bit uncompressed source clips into your DV PAL timeline, is FCP correctly adding the Shift Fields filer to those timeline instances?
    do you edit in 8-bit uncompressed and then export direct to DV PAL or do you nest your 8 bit uncompressed sequence into a DV PAL sequence first and then export as Quicktime Movie w/ current settings? if not the latter, try it (and make sure your nest has the Shift Fields filter applied)

  • Error in update rules when trying to add a field

    Hi Gurus,
    I would appreciate if u could help me out.
    I am trying to add the field Cumulative order quantity in sales unit ( 0CML_OR_QTY) in the update rule of 2LIS_11_VAITM. The field already exists in transfer rule and communication structure. When i am trying to add the field its giving and error message :No routine has been created for InfoObject BP:Business Partner Group (from Hierarchy) (data ield: Cumulative order quantity in sales units).
    I have tried to make the BP field as initial value. But still the same error persisted.
    Kindly let me know as to how to proceed.
    Thanks & Regards,
    Kapil

    Hi,
    Are you creating update rules for a ODS or a cube. If it is an ODS please make sure that none of your Key Fields are referring to the routine.
    Now first please add this 0CML_OR_QTY to your data target and activate it. Once you do that you will see that it will automatically come in the update rules and will be not assigned. Now once this is done you can assign the required value
    Regards,
    Pramod

  • Interlaced footage in secondary preview - wrong field order.

    I just got CS5 Production Premium and an EVGA GTX 465, which is basically a GTX470 with less CUDA cores (352 instead of 448). I added the card to the list in the Premiere CS5 txt file (the so called hack) and everything seems to work perfect except for one thing. When I play back interlaced footage that I shot with either of my two AVCHD cameras (Canon HF100 and Panasonic AG-HMC40), the footage in the TV set (which is setup as my second monitor) will play with the fields in the right order but after a few seconds it will start playing as if it were progressive, or as if the fields were in the wrong order. Then, eventually, it will go back to play the fields in the right order, and then the wrong order, and go back and forth like that. It switches every ten or twenty seconds. This happens both when the footage is played back in the source window and in the timeline.
    Thanks to the GPU acceleration, it plays smoothly always even with added effects and even with different tracks at different opacity levels (I tried three tracks, one at 25%, another at 50% and the other at 100% and it played without skipping a frame), but I don't understand why it doesn't always send the right field order. I wonder if it has anything to do with the cable that goes to the TV set, since it's DVI on the end that I connect to the video card, and HDMI on the other end. Regardless of that, I purchased the cable from Monoprice and it's a very thick, well shielded cable. The card comes with a mini HDMI output, but the cable that comes with it is not long enough to reach the TV. Still, I'm not sure that it would make a difference.
    Is this happening to any of you? Could this be a problem with the card itself, with my footage, or with Premiere?
    Note: I had switched the "Multi-display/mixed-GPU acceleration" to "Compatibility mode" in the Nvidia control panel and it didn't make a difference in anything related to CS5, whether it's this particular problem or anything else.

    JSS1138 wrote:
    We should probably just get the details, instead of speculation on what hardware is being used.
    Oh, the system is pretty fast, but Premiere always took a huge toll when external preview was enabled, it was like that in CS3 and CS4 as well. But here are my system specs just in case:
    AMD 1090T @3.8 Ghz (stable)
    16 GB of DDR3 G.Skill RAM
    Gigabyte GA-890FXA-UD5
    Western Digital 1.5 Gb Black Edition (as one of the video drives, the OS drive is a standard WD)
    EVGA GTX465 1 GB
    So while this may not be the fastest computer in the world, it's more than fast enough for HD, with 6 cores and 16 GB of RAM.
    This is something that's either wrong with Premiere's design, but maybe there's a workaround, which is what I'm trying to get to. I've been trying many things in the "Manage 3D" section of the Nvidia control panel, but nothing seems to work. VSync on or off, Triple Buffering, etc, etc, the problem is still there.
    Obviously if I right click on the monitor window and instead of "Both Fields" I choose either first or second field, I get just that, but I don't see why do I have to edit interlaced video with just one field instead of both.

Maybe you are looking for