Trying to make a real music video

ive use the old imovie on a imac g3 an it has a music video title effect an i was wanting to know how to make a music video on imovie 11 because i cant find the music video title effect

1) Make sure that your project is in the same aspect ratio as your camera. If your camera shoots 16:9. make a 16:9 project.
2) Check the clip inspector for the clip in your project to see if Image Stabilization is turned on. Stabilization works by zooming in, so you may want to turn it off.

Similar Messages

  • I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • When i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

    when i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

    1) Make sure that your project is in the same aspect ratio as your camera. If your camera shoots 16:9. make a 16:9 project.
    2) Check the clip inspector for the clip in your project to see if Image Stabilization is turned on. Stabilization works by zooming in, so you may want to turn it off.

  • How to make my own music videos?

    Ok,
    so this might be a rather stupid question.
    But I gotta ask.
    I would very much like to use the TV shows and music that I bought via Itunes to make
    my own music videos. I just got a new macbook pro...
    Is there a way to do that?
    Do I need a complicated/expensive software?
    Is itunes locked against such use?
    Does Mac come with it's own software for that?
    I would be very grateful if somebody could help me out.
    Even if just to say ..no way girl!
    Thanks ahead
    J

    Your assumption is incorrect. Whether the content is being used to make money or not doesn't matter, nor does it matter whether you paid for the content or not. You get rights only to play the content, not to repurpose it and use it for something else without a license to do so, though again "fair use" comes into play. In addition, the terms of sale for the iTunes Store prohibit use of anything obtained from them for other than your own personal use, which therefor prohibits posting or distributing in any fashion to anyone else.
    And yes, at least some videos in YouTube may well be illegal, which is why the content owners such as Viacom have filed lawsuits against YouTube over the years. Or the creators of the videos may have obtained permission to use the content, or the video may fall within the "fair use" guidelines. This isn't the place to disuss "fair use" since it is too complex and vague a subject to address without a lot of discussion.
    Finally, again, TV shows from the iTunes Store are copy protected and cannot be edited even if you believe they would fall under "fair use", as are a number of music videos, though not all.
    Regards.

  • Trying to make imovie incorporating trailer, video and slideshows

    i am trying to make a video in iMovie starting with a trailer, then a movie (video clip), then a slideshow, another movie, another slideshow, another movie, then my last slideshow.  I burned a copy, but it won't play continuously.  I have to keep going back to the menu to choose the next section.  How can I set it so it goes from the trailer right into the movie then into the slideshow, etc.....?

    i didn't mean to say iMovie.  I meant to say iDvd.  I have finalized the trailer as an imovie and I have exported the slideshows into itunes and dragged them into my iDvd.  They are all there and will burn just fine, I just don't know how to get them to play continuously without my intervention when they burn!!!!

  • Trying to make Scratchy Old Tv Video Effect

    I am trying to make a kind of scratchy older video effect of FCE, and really can't get the effect I want. Does anyone have any suggestions on some ways to do this? Thanks and any opinions would be appreciated!

    hello there,
    check this , is a free download old age movie , you can download this here:
    http://www.cgm-online.com/cgi-bin/dve_downloadcount.pl
    and do the following:
    Locate the folder
    "Macintosh HD/Library/Application Support/Final Cut Express Support/Plugins"
    at your System Harddisc.
    - Drag the folder "CGM Aged Film LE" into your "Plugins" folder.
    - Sometimes the following dialogue appears:
    'The item "CGM Aged Film LE" could not be moved because "Plugins" cannot be modified.'
    - Select "Authenticate" and type in your Administrator password.
    it works fine in fce (at least 3.5.1)
    rgds

  • Error message when trying to play movies and music videos

    I am getting the below message on my TV screen when i try to play movies via my iPad device through airplay. The irony of it is that I watched a whole movie before this problem developed.
    "This content requires HDCP for playback. HDCP  is not supported by your HDMI connection. This content required HDCP for playback"

    Make sure your HDMI connection is secure, try a reboot

  • Need help immediately! I am trying to make a interactive music game...ettin

    I was called by a friend and told he has a flash project that was due yesterday and the guys he paid to do it aren't getting it done.
    It's suppose to be a game where the player presses the space bar in line with a melody of a song....
    Does anyone know some code I could accomplish this with?
    Any help is appreciated

    Sorry, you cannot transfer videos from the video app to the camera roll.

  • Music videos & tv shows

    I have been trying to sort my videos out on my touch. In itunes I sorted them all out and named them, clicked on the video tab in info and labelled them either 'music video' or 'tv show' (I don't have any films yet). My videos were then disappeared from the video page and the tv show reappeared in the tv show library as expected, the music videos went into the music library. This all looked fine displayed on my ipod in itunes. However when I looked on my ipod itself there were now videos whatsoever in the video page, and I couldn't find a folder for tv shows anywhere!! Where are my tv shows hidden??? If I redo the info on my ipod in itunes and label them all as movie videos they all appear in my video section on my ipod no problem. Can anyone explain?? I just wanted to keep them all in separate sections instead of a mishmash of different types of video content!

    What version of itunes are you using, have you updated to the latest, 7.5? If so when you connect your ipod to the computer, and select the ipod from the right hand pane in itunes, the main window should change to show a overview of your ipod. Across the top of the overview pane there should be different tabs music/movies/tv shows etc. In the music tab make sure sync music videos is selected, under the tv show tab choose sync all tv shows. Also if you have itunes set to only sync checked items make sure that all of the videos and tv shows have the check mark next to them. Resync your ipod, and they should show up in the appropriate category under videos on your ipod. (The music videos will also show up in the music section of the ipod, but will only play the audio if you select them from there)

  • Need Help with ACTIONSCRIPT for Interactive Music Video

    I am trying to create an interactive music video in After Effects and Flash.
    The concept is that while the music video is taking place the user can  decorate the hair of the woman with any of the objects they select.   There will be predetermined animations and destination spots but the  user can choose whatever objects they select to be delivered to the  predetermined spot.  I need to figure out how to let the user to select  an object that will become part of the animation.  I created a PDF  Roughly explaining what I am trying to do.  If anyone can help me I'd be  very grateful as I am more versed in After Effects, I don't know  ActionScript well enough to execute what I am trying to do.
    Below is a rough example of what I am trying to do.  There will be a music video of an animated woman singing.  As she is singing the user will be able to click any of the objects , below the numbers 1-10.  Below it is illustrated that the user wants to press the blue number 2.  If the user presses the 2 the 2 will animate in the mouth of a bird to a predetermined pre-animated spot.  I assume I need to send a movieclip to a blank  holder on the timeline and use a gotoAndPlay() action ???  I am not well versed in ActionScript so any advice would help
    Now whatever number (movieclip) the user chooses next needs to be placed in another blank spot in the timeline? Below the user selcts the Pink 5.
    If the user just wanted to Place two "Blue 2's" then the "Blue 2's" would follow the same animated path and end up at the same predetermined space.
    If the user selected just 5's and 7's they would go to the predetermined preanimated paths
    How would I go about writing the Actionscript for this?

    Look, I hope you don't have false expectation that by knowing one piece of AS capabilities you will be able to accomplish your task.
    If I say that the code for placing one MovieClip into another is:
    clip1.addChild(clip2);
    will it make any difference in terms of implementation?
    Also, you say "select." This may mean a lot of thing: click, drag and drop, mouse down, etc. I am saying that implementation tightly depends of definitions that you give.
    I don't know the extend of your AS skills, so it is not easy to figure where to start helping. Also, forum, perhaps, is not the medium where someone will write a lot of code for you. It is good for getting answers to very specific questions and solutions. This is when you have some code in place already.
    What I would suggest is to start developing a very rough concept - no video, no birds, no numbers - just a static background image of the person you have in your first post. If you advance to an application that will allow user to select a square, place the square into another one - it will be a good start.

  • Need Help Syncing Live Music Video with Studio Recording

    Hi.
    I'm trying to put together a 'music video' using live video footage and studio recorded audio. The live footage was played at a different speed than the studio recording. Any hints on how to get this to look good?
    Can I pick a bunch of points in the song, say the start of a verse, set markers, and stretch the video between the markers to try to get it close? (I think I've done this before - but it was years ago..) Will the transition from slow video back to regular speed look funny? I do have other footage that will get spliced in at times, but maybe not enough to use at every transition.
    I'm thinking this is going to be really difficult to accomplish. Any ideas to make this easier would be appreciated.
    Thanks!

    My suggestion is to try Fit to Fill: this edits a video clip to a predefined section of the timeline (e.g. using IN and OUT points in the timeline) by stretching it or shrinking it to fit that section; the speed of the clip will be adapted accordingly.
    Piero

  • Video icons under "Music Videos" HELP!!!

    I have tried re tagging all my music videos. I do not get it... Some will have the artist listed one time but, it may say "u2" 3- videos.. then you click on "u2" and it jumps to the next screen of the 3 videos right? right.. However, I have 3 artist out of 20 that list each video on the first display page.. So why do some list one icon with multiple videos under it but others just list multiple icons. I am anal... I knnow but, it bugs me.....
    Thanks guys
    oh yeah,, I had one of the bad screens before. I took it back waited 2 weeks.. Got the new one today and it is Beautiful!

    That makes TOTAL sense now that I look at my list.. Thanks for helping me sleep hahah
    this thing is AMAZING. Now that my screen shows black right and all my pixels work. hehe
    thanks again.
    John

  • Is it possible to make a real 3D path in Motion?

    Hi guys,
    it's still me...
    Now I'm trying to make a real 3d path using the paint stroke.
    The problem is the paint points have only 2 parameters (X and Y) and I can paint it only on a 2d plain and not in a 3d world.
    I would make something similar to:
    http://www.youtube.com/watch?v=GBKAk53tMNM
    Is it possible using Motion?
    Thanks in advance,
    Alessandro

    Paint strokes are always on a 2D plane in 3D space, and always in "local 3D" which means they cannon interact with other objects (unless you keep them as 2D).
    However, you can animate particle emitters and replicators along a motion path in full 3D space and wrap around objects.

  • How to edit video info to music videos or t.v. shows

    i have a bunch of music videos but how do i edit the info so it'll appear as music videos on my ipod?
    i can edit them one by one but i have a lot so i just want to select everything and make'em as music videos
    Customized (AMD 64 X2 3800+, EVGA 7800 GT, 2GB PC3200 RAM, Black iPod Video)   Windows XP  

    i have a bunch of music videos but how do i edit the info so it'll appear as music videos on my ipod?
    i can edit them one by one but i have a lot so i just want to select everything and make'em as music videos
    Customized (AMD 64 X2 3800+, EVGA 7800 GT, 2GB PC3200 RAM, Black iPod Video)   Windows XP  

  • SCRAMBLED MUSIC VIDEOS

    I RECENTLY UPGRADED ITUNES, THEN WHEN I TRIED VIEWING ONE OF MY MUSIC VIDEOS THE PICTURE WAS ALL SCRAMBLED BUT THE AUDIO WAS OK. ANY NEW VIDEOS I BUY ARE OK JUST THE OLD ONES I HAD BEFORE I UPGRADED ARE MESSED UP! CAN ANYONE HELP???
    [email protected]

    http://docs.info.apple.com/article.html?artnum=303706
    Thank you Skita for your suggestion. It has helped me fixing the same problem too.
    Farfallakedanza

Maybe you are looking for

  • How can I get my songs purchased through iTunes to play on a windows phone

    My wife recently got a HTC One M8 (windows) phone and wants to transfer her music purchases over to her new phone. How can the AAC protection be removed so the music will play on something other than an Apple product?

  • Adding/Reading XMP Metadata in a psd file

    Hi, I'm having some troubles to understand how to add and read XMP metadata on a psd file. I followed the Panel developer guide tutorial, and try to look on the internet for some answers, but I'm still stuck ... Here is the simple example I'm trying

  • HDMI Signal Issue

    I don't understand why these issues keep recurring? After the the 12/1 handshake resolution i figured that the Samsung / Motorola HDMI issues were resolved but now I cannot get a signal with the HDMI connection and have to use component connection. A

  • Delta in LO Extraction

    Dear all,' Whenever we are running the init info package first time. 1.with data transfer . 2.without data transfer. My doubt is how many records will come in RSA7 with. 1.with data transfer . 2.without data tarnsfer. Let us assume there are 100 reco

  • My ipod has died, nothing is coming on when I hold the button in

    My ipod was plugged in my computer. The computer sent a message not recognizing the usb device, my ipod won't turn on now.