Trying to make out this license plate

I have been trying to make out a license plate for some time now.  It from cctv footage taken at night and I am wondering if there are any plugins or suggestions of how to go about it.  I would appreciate any suggestions.  Thank you.  I realize there is probably no way to make out the numbers but worth a try.

Now, if you could only get your hands on a copy of Photoshop CSI:
I think that Noel might be the only person, outside of TV, who has a copy...
Good luck, and I have been exactly where you are. In my case, I had daylight images, and the community's security camera got a good shot of the license plate. That part, plus my video, all went well. The one thing that was missing was a 100% positive ID of the driver. The community added two more cameras at the gate, to record both the driver's face, plus any front-seat passenger's face. However, that was too late in my case.
Hope that you can extract that data,
Hunt

Similar Messages

  • Trying to figure out this setup...

    I currently have an Airport Express (AX) from a few years back.  I'm interested in getting the new Airport Extreme (AE) for improved range and speeds, guest network, etc.
    My cable internet enters my house right by my home theater.  So, I have the modem there plugged into my AX.  My Mac across the room gets wireless from the AX (along with our iDevices), and sends Airplay back to the AX which is connected to my stereo.
    If I put in an AE after my modem, it will then put out the network for my Mac, and I will have my AX right next to it for Airplay.  Does it make sense to have the AE and AX next to each other?  Is there any easier way to setup Airplay?  I feel like it's a waste to have the AX right there, rather than using it somewhere else in the house to extend the network, but I can't figure out a better setup.
    Thanks for any and all help!!!
    Brian

    Do you mean connect the AE and AX via ethernet?
    Yes
    Is Airplay then going through the AE to the AX?
    AirPlay goes through the main router first before it reaches the AX, no matter whether you are using wireless or Ethernet to connect.
    Will the wireless on the AX then be disabled somehow, since the AE will be putting out the network?
    There's no reason to have two routers that are close together both putting out a wireless signal, so the wireless on the AX would be disabled to avoid the potential for wireless interference that is likely to occur when two wireless routers are in close proximity.

  • I keep getting different errors when i try to upgrade why? i have been 5 hours trying to figure out this ? im soo freaked

    help please.
    im on firmwere 4.3.5 im trying to go up to 5.0...

    Windows 7 includes DirectX 11 in its baseline and it is not necessary to install another version of it.  Your problems may be caused by the installation of the version of DirectX you installed.  Uninstall the one you installed and see if you
    still have the errors.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Dreamweaver Newbie making first site.  Trying to figure out this CSS thing...

    This is my first attempt and first site with DW and am having some newbie issues.  The website is www.accuvisionvideo.com.  The site is based on a DW template I picked up from a website.  If you go to the page you will see a menu on the left hand side and the body of the page mostly in the middle.  I am using Studio VII pop menu magic for that menu.  I want to make the thing horizontal, but still keep the side bar area (the photos and such underneath the menu)  However when I make the menu horizontal it removes everything from the left side space and does not give me the option to work in there any more.  How do I place images and text in the left column?  If I am not mistaken its a CSS thing...Also is there anyway to place images anywhere on the page.  Now when I insert an image it seems to have to be either fltlft or fltrt, I can't put multiple images on the same line?   Anyway I know these are noob questions, thank for any help guys.

    GasMaskProductions wrote:
    This is my first attempt and first site with DW and am having some newbie issues.  The website is www.accuvisionvideo.com.  The site is based on a DW template I picked up from a website.  If you go to the page you will see a menu on the left hand side and the body of the page mostly in the middle.  I am using Studio VII pop menu magic for that menu.  I want to make the thing horizontal, but still keep the side bar area (the photos and such underneath the menu)  However when I make the menu horizontal it removes everything from the left side space and does not give me the option to work in there any more.
    The PVII menu will insert into any div on your page.  What you need to do is create a brand new div just below your header div and insert the pvii menu into that div.  This way the new div won't take any styles from any of the current div styles on the page.
    How do I place images and text in the left column?  If I am not mistaken its a CSS thing...Also is there anyway to place images anywhere on the page.  Now when I insert an image it seems to have to be either fltlft or fltrt, I can't put multiple images on the same line?   Anyway I know these are noob questions, thank for any help guys.
    If the images are too wide, they will drop down to the next line (like the images at the bottom of the entry page now.)
    the fltlft and fltrt,are classes, that float and image to the left or to the right, so you can have text surrounding the image.
    Also, for such a simple page you have over 78 errors when you put the page throught he html validator:
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.accuvisionvideo.com%2F
    The majority of them will certainly need fixing before creating any further pages using a similar layout.
    Just notice this also:
    .style5
                                        font-family :
                                        "Charlemagne Std";
                                        font-size :
                                        xx-large;
                                        color :
                                        #000000;
    That's not a web-safe font, if someone doesn't have that on their system, they will not see that font, they'll be served the default font
    of their browser set.
    More about Web Safe Fonts:
    http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://twitter.com/nadiap
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    http://csstemplates.com.au/

  • Trying to figure out this error

    I have a Flex website that I created and I'm getting the
    following error when I try to call to my ColdFusion RemoteObjects:
    [RPC Fault faultString="Send failed"
    faultCode="Client.Error.MessageSend"
    faultDetail="Channel.Connect.Failed error
    NetConnection.Call.Failed: HTTP: Failed: url: '
    http://reevespro.com/flex2gateway/'"
    I haven't a clue where or to fix. And I have no idea why it's
    trying to call flex2gateway, the directory doesn't exist. Anyone
    have a clue?
    Thanks

    Hi,
    If you are using the ColdFusion adapter for BlazeDS/LCDS,
    please open remoting-config.xml and see which channel your Remoting
    destination is using. In services-config.xml, you should be able to
    find channel used above configured. You should be modifying the end
    point URL of the channel.
    Hope this helps.

  • "Call Fail" error when trying to make out calls.

    Hi, I'm on iPhone 4S with iOS 6.1.3 . Recently I've been experiencing this problem of doing  outgoing calls. It keeps on having this "CALL FAILED" error. Previously it sometimes came but went back normal after an hour and I thought It might be caused by my network carrier . But its been 4 days now. Do take note that Im still be able to receive all incoming calls, SMS, Apps Messaging as well internet surfing & others. Pls guys help me to resolve this issue. Tq.
    P/S
    My location = Malaysia
    My ISP & cellular network carrier = Celcom

    Hello zipinabag,
    Thank you for all the information you provided regarding the issue you are experiencing when making a call on the iPhone. I recommend reviewing this tutorial:
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to Blur License Plate Tags in Video?

    I video of my car at the local race track that I'm cutting up for a project and would like to blur out my license plate tag. In some parts, my car is centered in the video and in others, it's moving around in the frame. How can I go about doing this in Premiere Pro CS3? I'm running on Windows, if it matters. I tried searching and couldn't come up with anything. It's been a while since I've used Premiere so be easy on me. Thanks in advance for any help.

    there are hundreds of examples and tutorials on the web.
    click on this link:
    http://www.google.com/search?q=blur+face+in+premiere
    or go to www.wrigleyvideo.com and look at the tutorials: http://www.wrigleyvideo.com/videotutorial/tut_premiere_6x.htm
    This one has exactly what your looking for: http://blogs.adobe.com/bobddv/premiere_pro/
    just scroll down the page.

  • I am trying to find out if I can change a setting of the calendar in my iPhone.   When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change? SS

    I am trying to find out if I can change a setting of the calendar in my iPhone. 
    When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change?

    Hello SMEvans32
    You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
    iCloud: Calendar sharing overview
    http://support.apple.com/kb/PH2689
    iCloud Setup
    http://www.apple.com/icloud/setup/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I'm trying to make this work, but can't figure it out. Please help.

    I am trying to make a Presentation to email for others to see without a browser, but when I do, it doesn't show. I've downloaded Adobe Flash Player 10.0 r22, I've built the presentation, I've published the presentation and uploaded to my hosting. I have tried everythiing I can think of. It works on my machine; however, when I try to view it out of it's containing folder, it doesn't show anything but the preloader. Can someone please help me?
    I can send you an example of a working Presentation along with a Zip file containing my presentation with everything I've built if my explanation isn't quite clear. Please help.
    Thank you,

    Yes,
    I need to remove it from this forum.
    Sorry about that,
    R.A

  • Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen.  They presently move from one to another way too quickly...also need a different pan and zoom option.  Wher

    Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen.  They presently move from one to another way too quickly...also need a different pan and zoom option.  Where are all the options I had in PS10?  Also...Can I burn this to a DVD?

    The changes have brought improvements but also drawbacks compared with the old slideshow editor.
    The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

  • While editing photos in Aperture, I'm trying to make an "auto" adjustment to the exposure but the button is grayed out and consequently doesn't perform any function, please help! Thank you, Mike

    While editing photos in Aperture, I trying to make an "auto" adjustment to the exposure,
    but the "auto" button is grayed out and will not allow any auto function to take place.
    Please help!
    Thank you,
    Mike

    Mike, are you working with raw images?
    For some raw images auto exposure is not available, have a look at this manual page:
    http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=9%26tasks=true
    Note: Automatic exposure adjustment is available for Aperture-supported RAW images only. If you want to adjust the exposure of another file type, such as JPEG or TIFF, see Working with the Exposure Controls. For a list of supported RAW file types, go to the Apple website at http://www.apple.com/aperture/specs.

  • Dead HD trying to find out about this mac

    I am fixing a Macbook for a friend and his hard drive is dead. Almost all the numbers on the back of the computer are worn off. Is there a way to find out what the computer has in it by way of terminal commands possibly? I am trying to find out if I can buy him Mountain Lion and install it on a new hard drive.
    Any help would be appreciated. Thanks
    Laura Drew

    Once you've put in the new hard drive and formatted it for the Mac you'll want to put OS 10.6 Snow Leopard on it. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Put your 10.6 install DVD into the optical drive (CD/DVD drive) and reboot.  As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
    Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
    You can now follow the instructions on the install screen             

  • HT5312 im trying to make a purchase on itunes and its asking for my security question and i dont remember them its been years since i made this account how can i reset them

    im trying to make a purchase on itunes and its asking for my security question and i dont remember them its been years since i made this account how can i reset them

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (98991)

  • Should I delete older licenses,(iTunes, Line 6, etc), once a new one is saved on my drive? I'm trying to make space on my Mac.

    Should I delete older licenses, (iTunes, Line 6, etc), once a new one is saved on my drive? I'm trying to make space on my Mac.

    Material you do not need does not belong on your MBP.  What you are referring to though are rather small items and would be difficult to find them all.
    I would suggest a clean install.  Backup all of your data, reinstall your OS, erase the internal HDD and then select only the data you wish to retain.  This way all of the refuse is automatically eliminated.
    Further, consider a larger internal HDD before you do this.  The less data on a HDD, the better the performance.
    Ciao.

  • Every time I try to send to the trash anything to the trash appears de following: Finder is trying to make changes. Introduce your password to allow this action. Appears since 24h ago, never before had this problem, What´s the problem?

    Every time I try to send to the trash anything, appears de following: Finder is trying to make changes. Introduce your password to allow this action. Appears since 24h ago, never before had this problem, What´s the problem?  I am using Mac OS lion

    Can you post the permissions on your Home folder?
    Open Terminal, copy and paste this command. Copy the output and post here. If you want to mask out your user name, then paste the output into a text editor and use Find/Replace to change it to something like "username" before pasting it in here.
    ls -ale

Maybe you are looking for