Trying to match sidebar to image background

I am creating a professional portfolio. I've been working on this problem for days, and nothing I try seems to work. It's a little bit hard to explain so I am posting a screen shot to aid in this discussion.
How can I get the background of my image to match the sidebar of my illustrator file? Tried to select background then paint the same color. But colors do not match. Do I need to make a transparent background somehow?

Is your image background REALLY 50%K or is it a build of CMYK to try and look like 50%k?
If you hover over the background in Photoshop what does the Info panel read? Are there CMY values in the info panel? That's not a 50%K then.
If you want 50% K in Photoshop, you need to add 50% to the K channel in Photoshop and not simply paint on 50%k.

Similar Messages

I am trying to remove something from the background of my image how is this done.

i am trying to remove something from the background of my image how is this done.

jboll0820 wrote:
how is this done.
Generally, using a different program than Lightroom, e.g. Photoshop.
Note: you can remove objects in Lightroom by stringing dust-spot removal bubbles across them, but that may or may not be preferrable. If you do go that route, it may be essential to position strategically *after* initial placement.

How can I remove an image background in pages?

I want to know how to remove image backgrounds just like how you do so through "instant alpha" on a mac.

Hi Erika,
Are you trying to save a portion of an image with a transparent background? It may help to post a screenshot of the image that you're working with as well as your layers panel.
I've included a few tips below that may help you with your situation. If you need additional help, please feel free to post again
Deleting a background and saving an image with a transparent background
1. Here I am working with an image of a santa hat that I've cut out from a white background. I have two layers, the cut-out santa hat and the original file. I'm going to delete the background layer so that I have just one layer - the cut-out santa hat:
2. You'll see that a checkerboard pattern has appeared behind the santa hat. This means that the background is transparent.
3. You can then go to File > Save As... and select PNG, Photoshop PSD, or TIFF from the Format dropdown menu. These file formats will save the cut-out portion of your image on its own, while preserving the transparent background.

Setting image background transparent

I want to know how can I set the background of an existing images to transparent. I am a web desginer and currently i want's to change background color of one of my site http://twxdroid.com but here the problem arises that some of my used images background won't match up site background, so someone plz tell me how to change existing image background transparent. I heard about using magic wand selection tool or quick selection tool to make transparent but still can't figure out how to use them.

• if the Layer is a Background Layer change it to a regular one by double-clicking it
• make a Selection with whatever Selection Tool is appropriate
• if you selected the background use Select > Inverse to invert the Selection
• Layer > Layer Mask > From Transparency
• if further corrections are needed paint on the Layer Mask – black to hide, white to show the Layer’s content
• save the layered file as psd, psb or tif
• File > Save for Web … to save a copy a format that fits your needs (png-24 for example)

Div image background not showing

Hi I am trying to give a div a background image and then place tables etc in the div. The trouble is the image does not show up. Any help greatly appreciated. Regards, Matt. (Here is the html, followed by the css...)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
<meta name="generator" content="Adobe GoLive" />
<title>Beermatt Online Home Page</title>
<link href="css/goldenumber.css" rel="stylesheet" type="text/css" media="all" />
</head>
<body>
<div id="bg">
<p><a href="index.html">home</a> | <a href="web.html">web design</a> | <a href="photography.html">photography</a> | <a href="editing.html">editing</a> | <a href="contact.html">contact</a> | <a href="downloads/Matt_CV.pdf" target="_blank">cv</a></p>
</div>
</body>
</html>
body { font-size: 20px; color: white; font-family: tahoma, verdana, arial; background-color: #000000; }
a:link { color: white; font-size: 16px; text-decoration: none; }
a:visited { color: white; text-decoration: none; font-size: 16px;}
a:hover { color: gray; text-decoration: none; font-size: 16px;}
a:active { text-decoration: none; color: yellow; font-size: 16px;}
#bg { background-image: url(images/terrain.jpg); background-repeat: no-repeat; margin-right: auto; margin-left: auto; }

Hi...
The background image in this CCS style worked fine for me. You might try to include the Width and Height and Visibility...
#layer1 { background-image: url(Frost.png); background-repeat: no-repeat; height: 132px; width: 262px; left: 18px; top: 18px; position: absolute; visibility: visible; }
walt

Image background changes colour when exported

Hi there,
I have placed a jpg image (also tried it as a bmp) onto my report... The section background is white... The image background is white.
When the report is run, everything appears fine... HOWEVER, when the report is exported to PDF, the image background is slightly tinted (ie RGB 255, 255, 255 to 251, 254, 253).
I've tried the Report Options / Retain original image colour depth and Export Registry Settings options listed in other posts but still get the same results.
Does anyone have any ideas so I can hopefully this customer off my back.
Cheers,
Mat

When you zoom in PDF file the color depth decreases. In report level make it in large size and try to export it.

Trying to create a signature image

I am trying to create a signature image via the Stamp tool. I have managed to do so, but i was wondering if there was a way to have only the hand written area as the stamp and get rid of the white background.
Thanks in adavance.

Here is a short step by step article on how to do this-
http://www.gregledet.net/?p=5
Hope this helps,
Dimitri
WindJack Solutions
www.pdfscripting.com
www.windjack.com

Region Image Background

Hello,
Does anybody know how to set up a image background on a region.
I want to have different backgrounds for my two different regions.
Can someone help me.
I tried with the background style but it end up putting the background on the outer region (the main one) so I'm not sure how to do this.
Sorry to bother you if this is very easy to do, but right now I don't have an idea on how to do it.
Regards,
Ruben

Hi,
Add to Region "Region Attributes" something like
style="background: url(#WORKSPACE_IMAGES#mypic.gif)"Replace #WORKSPACE_IMAGES#mypic.gif with url where is your image you like use as background
Br,Jari

Trying to make a system Image disc in windows 8.1 HP envy desktop 700-019

I have been trying to create a system Image on my desktop but I cannot do it, I have followed all the Instructions, tried Memorex discs, tried verbatim discs and tried nexXTECH discs but I always get an error message That there is not enough free space on the back up storage location to back up data error 0x80780048, no option to use a thumb drive and no option to format the disc, the other error code I get is 0x800704C8, File history is turned off and cannot turn it back on.
It tells me to create my own hard drive but when I click E drive to burn the disc to I am back to the error messages, I have next to nothing on this desktop, no pics, no videos, no games, perhaps 20 songs and thats it besides Norton and Microsoft office Home and Student. It has a 2 terabyte hard drive with 12GB of RAM and there is no way this could be full, I just do not understand what is going on.
Can anyone help please.
This question was solved.
View Solution.

Perform a hard disk image backup to an external hard drive using Macrium Reflect Free, not the trial version, for optimal results.
http://www.macrium.com/reflectfree.aspx
Trying to perform this to DVD or USB stick is doomed to fail and not very reliable.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

Trying to display multipage tiff image getting error

Hi
I am trying to read multipage tiff image but dont know how
I tried to display single page tiff getting error
my code is
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Drawing;
using System.Drawing.Imaging;
namespace Documentviewer1
    public partial class _Default : System.Web.UI.Page
        //string filepath = "";
        protected void Page_Load(object sender, EventArgs e)
            //// filepath = "image\045237302.tif";
            string appath = Server.MapPath("/image") + @"\";
            string imagename = Request.QueryString["ImageFileName"];
            string filename = appath + imagename;
            Response.ContentType = "image/tiff";
            new Bitmap(filename).Save(Response.OutputStream, ImageFormat.Tiff);
            ////System.Drawing.Image TheImg = new App.Files.TIF(Request.QueryString["FilePath"]).GetTiffImageThumb(System.Convert.ToInt16(Request.QueryString["Pg"]), System.Convert.ToInt16(Request.QueryString["Height"]),
System.Convert.ToInt16(Request.QueryString["Width"]));//getting error in thisline Parameter not valid
my aspx page is has
<%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
    CodeBehind="Default.aspx.cs" Inherits="Documentviewer1._Default" %>
<asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent">
</asp:Content>
<asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent">
    <h2>
      <img alt="" src ="image/045237302.tif" width="200" height="200"/>
    </h2>
    <p>
        To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>.
    </p>
    <p>
        You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&clcid=0x409"
            title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>.
    </p>
</asp:Content>
getting error as Parameter not valid.
Can anybody help me to display the image in the browser.
Thanks
Mary Abraham
Mary Sunish

Hi MaryAbraham,
Since the issue regards ASP.NET and website deployment. I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help! I am trying to use the scripts image processor in Photoshop CC.

Help! I am trying to use the scripts>image processor in Photoshop CC. When I click on it it comes up with an error saying that it cannot find the Javascript Plug In. I have the newest version of Java installed. How do I get it to work in Photoshop. Do I have to download a separate plug in? Any help would be greatly appreciated.

Java is not Javascript.
Do you have a Mac or PC?
If PC, do you have this file on your system?
C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\Extensions\ScriptingSupport.8li
If not, you've got a corrupted installation of Photoshop. Uninstalling and reinstalling may help.
-Noel

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like t

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like this to export my lightroom images to edit in photoshop as it has always been able to do for me. What fix do you recommend?

Hi Ashley Clavette,
The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what exactly happens ? Does the pdf opens in the desired Initial View setting?
Rahul

ReferenceError: photoshop is undefined? Trying to use Dr. Brown Image Processor Pro

Hello!
I installed Dr. Brown Image Processor Pro.
I have Bridge and PS (CS6, CC and CC 2014) x64.
Had to do a manual install to each folder.
In Bridge I get the error
ReferenceError: photoshop is undefined? Trying to use Dr. Brown Image Processor Pro.
I tried both the CC and CS6 bridge same result.
I have about 100 1GB plus files I want to size down. and need Image processor.
Any Advice?
I tried Dr. Brown's JUST FIX IT, bit it just brought me to the script editor. I'm not a programmer.
Any advice will be appreciated.
Maxi

I wonder if this PDF Processor script would work better for you:
http://www.ps-bridge-scripts.talktalk.net/
Look under PSCS Scripts in left most column

Space between DIV with image and DIV with image background

I have just about finalized the new design on my website. The only issue I am having now is on the gallery page. There is a thin space between a DIV with an image and DIV with an image background. I am using these DIV's to give the illusion of a blue border. If you look at any of the other main pages on the site the space is not there. Any ideas?
http://liquidfirefishing.com/index.php
http://liquidfirefishing.com/gallery/main.php
Here are a couple of screenshots to show exactly what I mean.

Hello,
both my "IE8" and my "FF 7.01" show the blue boundary lines. Here my screenshots, left side IE8, right side FF:
Header 1
Header 2
Hans-Günter

Trying to match sidebar to image background

Similar Messages

Maybe you are looking for