Trying to merge 5 images

Whenever I try to merge 5 images of a chorale, the first four are merged together fine, but the 5th image gets put 'under' the top four...I never had this problem with CS3, so I don't know where to begin to resolve...? Using CS5 12.0.3 on Windows 7, 6G's of Ram..
Thanks so much for your time!!

It's "under" because Photoshop can't find any alignment of that image with the other 4 -- so Photoshop treats it as a separate panorama.
And that's probably because the people moved too much between the shots (you do seem to have enough overlap).
You could manually position it, then run the auto-blending command.

Similar Messages

  • Merging multiple images into one

    Hi,
    I am using Photoshop CS5 Extended on OSX.
    I am still green when it comes to using Photoshop so all help to this question is much appreciated.
    I am trying to merge several images together into the one. The images all have the same background but with a single object moving through the images in procession (the images are of a skiing piste with a snowboarder moving through). I have searched for a solution online but the best I found with so far is making each image a layer and then using a mask on each layer and making only the snowboarder visible from each picture. This works ok but it is quite difficult to get each layer to blend in nicely with the background. Also, I am dealing with 20+ layers, so it is a very labour-intensive solution. I am asking to see if there is another solution whereby I can merge all the images together? Apologies if this has been covered elsewhere but I seem unable to find another solution.
    Again, thanks in advance for any help :-)

    while manual masking is certainly the best option (assuming that all images are taken with a tripod, are somehow aligned, and all have the same exposure) (and 20 layers isn't that labor intensive), you could try to select all 20 layers, make them a smart object, and then go to layers: smart objects: stack mode and see if any of the mode give you something automatically what you are looking for.
    another thing you could try (not sure if it'll work) is select the layers and go to auto blend: focus stack and see if that works.
    alternatively, you could try cutting the subject out (lasso select, invert selection, delete) in each layer, and then go to auto blend, panorama.

  • How to merge 2 images???

    i have 2 images which are 500*500 pixels, how to merge into 1000*500 pixels image?

    Can you help me with the same problem... I'am trying to merge 2 or more images and combined it into 1 gif image in a fly...
    how can I save it into a gif file... I'm using
    Acme.JPM.Encoders.GifEncoder for the convertion into a fly gif file...
    here is my code....
    public class imagemerger {
    /** Creates a new instance of imagemerger */
    public imagemerger() {
    public static void main(String[] args) {
    try
    InputStream is = new BufferedInputStream(new FileInputStream("C:/index_02.gif"));
    InputStream is2 = new BufferedInputStream(new FileInputStream("C:/index_22.gif"));
    try{
    Image offscreen = ImageIO.read(is);
    Image offscreen2 = ImageIO.read(is2);
    BufferedImage newImage = new BufferedImage(1000, 1000, BufferedImage.TYPE_INT_RGB);
    Graphics2D newGraphics = newImage.createGraphics();
    newGraphics.drawImage(offscreen, 0, 0, null);
    newGraphics.drawImage(offscreen2, 500, 0, null);
    //Image fin = ImageIO.read(newGraphics);
    FileOutputStream out=new FileOutputStream("c:/final2.gif");
    GifEncoder encoder = new GifEncoder(newGraphics, out);
    }catch(IOException IOE){}
    } catch(FileNotFoundException FNF){}

  • Problems Merging Variable Images in InDesign

    I'm currently trying to merge text and images to a clients master InDesign file for printed output on our Docucolor. The text is merging fine (when I click the preview button in the merge data tab) but I keep on getting a message pop up to say that pictures are missing or cannot be found. If I proceed to run a merged file InDesign generates a report listing all the missing pictures (which is basically all of the pictures I'm intending to merge / print).
    I think the problem lies in the pathnames I'm setting up for each image in my Excel file (which obviously I'm converting to a CSV file afterwards). The InDesign help file shows "\" as separators for Windows and ":" for OSX. My pics are in a folder on the desktop of my Mac but using ":" as separators does not work. If I select an individiual image and do an apple-i the information that appears uses "/" as separators when describing the file's location, so I tried that as well but it didn't work either! I've also tried replacing spaces with "_" in the file names - didn't work.
    What am I doing wrong?

    I got fed up with how it handled path names a long time ago, just keep the database in the same folder as the images and you only have to put the file name in the database.

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

    I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

    I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • My iphone4 isn't updated or synced to icloud because last time I tried it merged with a family members phone. Now I'm getting a new phone am scared I am going to lose all my contacts. Any suggestions on how I am to secure them?

    My iphone4 isn't updated or synced to icloud because last time I tried it merged with a family members phone. Now I'm getting a new phone am scared I am going to lose all my contacts. Any suggestions on how I am to secure them?

    Backup using itunes http://support.apple.com/kb/HT1766
    Are you sharing an apple id with someone?  that would be the only reason if would merged info.

  • I can't get imovie to open after trying to shift the image to my TV by clicking fn F3.  If I hold the mouse on the imovie icon for a few seconds the imovie window opens but if I click anywhere on the window it disappears

    I can't get imovie to open after trying to shift the image from my macbook pro to the tv screen like I have done many times before.  If I double click on the imovie icon, imovie doesn't open, but the strip across the top shows iMovie, file, edit , clip, view, text share window help tabs across the top.  The iMovie window will appear if I click on the iMovie icon on the dock for a few seconds, or if I do control F3 at the same time, but when I click on the window it disappears.  When I hover the mouse over the iMovie window that appears the window has a blue border around it.  when I move the mouse outside the iMovie window the blue border goes away.  If I sweep 4 fingers from the top of the screen down, the screen dims a little but the iMovie window doesn't appear. If I click play under the view tab I can hear audio, but still no iMovie window.  It's as if the window is being blocked by the desk top somehow.

    Similar issues here.
    I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

  • I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

    I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

    At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
    When editing in Photoshop just add a box or mark on the image, for your tests.
    - If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
    - If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

  • Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

    Hi I have a question about shooting in Raw with my Canon EOS 6d.
    I'm in the process of learning photography and my goal was to start shooting in raw.
    I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
    Heather

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • Error when trying to upload an image

    Hi!
    I'm trying to upload an image to my container name "vhds" inside storage account "pruebasatfacr" but I'm getting the following error:
    [root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string"  --container vhds
    info:   
    Executing command storage blob upload
    File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
    + Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
    error:  
    getaddrinfo ENOTFOUND
    info:   
    Error information has been recorded to azure.err
    error:  
    storage blob upload command failed
    [root@vmlbcatfl49 KVM]# cat azure.err
    Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
    { [Error: getaddrinfo ENOTFOUND]
    stack: [Getter/Setter],
    code: 'ENOTFOUND',
    errno: 'ENOTFOUND',
    syscall: 'getaddrinfo',
    __frame:
    { name: '__1',
    line: 270,
    file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
    prev:
    { name: 'StorageUtil_performStorageOperation__1',
    line: 251,
    file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
    prev: [Object],
    active: false,
          offset: 19,
    col: 4 },
    active: false,
    offset: 2,
    col: 15 },
    rawStack: [Getter] }
    Error: getaddrinfo ENOTFOUND
    at errnoException (dns.js:37:11)
    at Object.onanswer [as oncomplete] (dns.js:124:16)
    at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
    at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
    at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
    I guess that can be a DNS
    issue but I need more information about that, does anyone
    know why can it be caused?
    Thanks in advance!

    Hi again and thanks for your response!
    I have a VM with Azure CLI tool running with RHEL 6.5, so that I think i can't use AzCopy only compatible for Windows O.S.
    The file that I want to upload is located on Azure CLI server and I execute de following command:
    [root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string"  --container vhds
    info:   
    Executing command storage blob upload
    File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
    + Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
    error:  
    getaddrinfo ENOTFOUND
    info:   
    Error information has been recorded to azure.err
    error:  
    storage blob upload command failed
    Further info related to this error:
    [root@vmlbcatfl49 KVM]# cat azure.err
    Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
    { [Error: getaddrinfo ENOTFOUND]
    stack: [Getter/Setter],
    code: 'ENOTFOUND',
    errno: 'ENOTFOUND',
    syscall: 'getaddrinfo',
    __frame:
    { name: '__1',
    line: 270,
    file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
    prev:
    { name: 'StorageUtil_performStorageOperation__1',
    line: 251,
    file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
    prev: [Object],
    active: false,
          offset: 19,
    col: 4 },
    active: false,
    offset: 2,
    col: 15 },
    rawStack: [Getter] }
    Error: getaddrinfo ENOTFOUND
    at errnoException (dns.js:37:11)
    at Object.onanswer [as oncomplete] (dns.js:124:16)
    at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
    at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
    at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
    Is it possible to continue exploring this option with the CLI tool to upload  the file (.vhd)?

  • While trying to merge pdf files which are having the version 1.4 throws err

    As per my business need i need to merge some pdf files. Among those files some are having the version above 1.4. I am using the api "oracle.apps.xdo.jar ".
    While trying to merging the pdf files its throwing the exceeption like
    " oracle.apps.xdo.XDOException: oracle.apps.xdo.template.pdf.exception.FatalException: The template seems to be in either corrupted one or newer version than PDF1.4 ".
    If all of the files are having the below 1.4 version then working fine. But any one of the file have above 1.4 version then it is throwing the above error.
    Please can i have the solution for this problem.

    Thanks for the response.
    Sorry.there is no option to feed again into <1.4 version. cause those documents are already existed in database and i have to use the same documents to merge.
    So is there any alternate solution on the same .

  • Trying to make an image of a Server but getting error message

    I'm trying to make a disk image (.dmg) of an XServe. I boot the XServe off of an external drive, fire up disk utility and choose File>New>Disk Image from <server volume>
    Then I choose where I want the .dmg file to be created. It doesn't matter where I try to put it (one of the additional two unused hard drives in Bay 2 or Bay 3, or on a network volume), I get an error message: "Unable to create <server volume> (Resource Busy)."
    What am I doing wrong? Or what do I not understand yet?
    Thanks.

    Hi.
    Tried another tactic. I booted up the XServe into Target Disk Mode on a MacBook Pro. Then fired up Disk Utility again and chose File>New>Disk Image from "server volume". It started, but erred out with the "Resource Busy" message. Then I tried the same thing but this time instead of "server volume", I chose File>New>Disk Image from "698.6 GB AAPL FireWire Target Media". It still erred out with the "Resource Busy" message. Then I tried File>New>Disk Image from Folder, and then chose "server volume", and then selected where to save the .dmg and it started to create the image, but erred out with "Unable to create "server volume" (No such file or directory)." Then I tried "Disk Image from Folder" again, but this time chose "698.6 GB AAPL FireWire Target Media", selected where to save the .dmg, and once again, it started to create the image, but erred out again with "Unable to create "server volume" . I'm at a loss. I am unable to create an image of the XServe HD and I need to. Does anyone out there have any ideas? Thanks.

Maybe you are looking for