Trying to migrate Project license from one machine to another

I am trying to setup Project Standard 2010 on a new machine. I still have the license numbers, et al from an old machine. I cannot seem to find a Project 2010 Standard download that does not want to charge me a fee. Can anyone point me in the right direction?

I don't believe there are any trial versions of Project 2010 Standard.  If you have the key (but not the media) see:
http://office.microsoft.com/en-us/products/download-back-up-restore-microsoft-office-products-FX103427465.aspx
Scroll down to the section on Office 2010.

Similar Messages

  • Error when cloning db from one machine to another

    Hi people.
    I am trying to clone a database from one machine to another. (both are linux x86_64 machines with 11g installed on both)
    I obtained the following error after a few minutes into the process. Any workarounds for this?
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00601: fatal error in recovery manager
    RMAN-03004: fatal error during execution of command
    RMAN-10041: Could not re-create polling channel context following failure.
    RMAN-10024: error setting up for rpc polling
    RMAN-10005: error opening cursor
    RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
    RMAN-03002: failure of Duplicate Db command at 11/26/2013 23:05:42
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    Process ID: 9054
    Session ID: 91 Serial number: 5

    Likely the RDBMS Software version and/or Patchset level is not the same on the two servers.
    Hemant K Chitale

  • Migrating ODI objects from one environment to another

    Hi,
    This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
    The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
    I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
    When i choose "Synonym Insert_Update" option to import is prompts error :
    You are importing an object from another repository with same identifier. This is forbidden
    This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
    What should be followed to migrate objects ?

    user8628169 wrote:
    Hi,
    This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
    The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
    I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
    When i choose "Synonym Insert_Update" option to import is prompts error :
    You are importing an object from another repository with same identifier. This is forbidden
    recreate your OA repository with repository id different from your DEV repository.
    Then you should not get this problem.
    This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
    What should be followed to migrate objects ?

  • Easy way to migrate users from one machine to another?

    I have an iMac lab where students have their own local accounts. The machines are bound to W2k Server with AD. New school year, new seating charts, some users must move. Is there an easy way to migrate a user and all their stuff from one machine to another? We do have Remote Desktop BTW. I'm not finding an obvious answer so I guess there isn't but I sure wish there were. I suppose they could copy anything they want onto the server. set up a new account on the new machine and pull it all back off the server, but that's not "easy".

    Hi
    +The machines are bound to W2k Server with AD.+
    This could be a telling statement although without further information it would be hard to say?
    What I'm assuming from this is that current mac clients are bound to Active Directory. This would mean that user accounts exist on the Server and not locally. In which case there would be nothing to transfer other than the local admin account - again assuming you want the applications installed on the current client macs transferring over to the new client macs.
    To be honest it would be easier and less hassle to create a new local admin account and install compatible software fresh. Use the same tools you used to 'bind' the old client macs to Active Directory for the new client macs.
    +We do have Remote Desktop BTW+
    You could utilize this to (a) name all the new mac clients with appropriate hostnames and (b) 'bind' new mac clients by issuing dsconfigad from the command line. If this seems like too much hard work then you could simply exercise your legs and walk round each one in turn.
    Even if your current mac clients are configured with Mobile Accounts (locally cached network accounts) this would still not be a problem as you can manually or automatically sync the locally cached networked home folder back to the server and then log in with that account again on the new mac clients. The home folder should then be cached locally.
    This assumes you've configured Directory Utility in the appropriate way.
    Tony

  • How can I migrate an Essbase Appl. from one machine to another?

    We uses 3 computers to cover our development cycle: one for developing, one for testing with almost real data (integration test) and a production machine.I created a new Essbase appl. and want to transfer it from one machine to another, but only using batch scripts (ESSCMD) due to company policy. I don't know where the name of the application is stored. (I thought it is essbase.sec, but I believe is not true)I transfer all the files that belongs to an appl. (the list of them I get using BEGINARCHIVE) but is not enough.Does anyone have a hint?

    If you can map a drive to each to the servers, then:1. Create an application/database on the new server with the same names as those on the old server.2. Use Windows/DOS, copy the outline (.otl), calc scripts (.csc) and load rules (.rul) to the new server.3. Export the database from the old server to a file(s) on the new server.4. Stop/start the new database/app.5. Import the data into the new server (no load rule needed).

  • VOs are corrupted after copying from one machine to another

    Hi all
    I have a customer with the following problem:
    A team of developers are creating custom pages on different PCs for the same project.
    In order to have the latest BC4J objects for everyone, VOs (XML file and Impl.java and RowImpl.java) are copied from one machine to another and added to the project.
    But when doing this and trying to view the attributes of the new VO on the machine where the new VO si copied over will result in an error:
    java.lang.NullPointerException
    at oracle.jbo.dt.ui.view.VOAttributePanel.getFieldType(VOAttributePanel.java:687)
    at oracle.jbo.dt.ui.view.VOAttributePanel.actionPerformed(VOAttributePanel.java:851)
    at javax.swing.JComboBox.fireActionEvent(JComboBox.java:1197)
    at javax.swing.JComboBox.setSelectedItem(JComboBox.java:561)
    at oracle.jbo.dt.ui.view.VOAttributePanel.setFieldType(VOAttributePanel.java:754)
    at oracle.jbo.dt.ui.view.VOAttributePanel.updateControls(VOAttributePanel.java:393)
    at oracle.jbo.dt.ui.view.VOAttributePanel.setAttribute(VOAttributePanel.java:642)
    at oracle.jbo.dt.ui.view.VOAttributeTabPanel.updateControls(VOAttributeTabPanel.java:33)
    at oracle.jbo.dt.ui.entity.EOAttributeTabPanel.setAttribute(EOAttributeTabPanel.java:143)
    at oracle.jbo.dt.ui.view.VOEditAttributeTabPanel.attrValueChanged(VOEditAttributeTabPanel.java:301)
    at oracle.jbo.dt.ui.view.VOEditAttributeTabPanel.enter(VOEditAttributeTabPanel.java:107)
    at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:620)
    at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:595)
    at oracle.jbo.dt.ui.view.VOWizard.selectPage(VOWizard.java:243)
    Please notice that source JDeveloper version and target JDeveloper version are the same and are coming from the same JDev OA patch.
    The only workaround i could find is creating the VO from scratch on the 2nd installation, but this reduces very much the development time, because developers are doing the same work other developer had undertaken before, so there is no benefit from this.
    I got exactely the same result when copying the VO on the same machine in 2 different JDev installations (with the same version of course).
    I have a very simple reproducible testcase with OA Toolbox tutorial:
    Requirements:
    - Two (2) workstations
    - Each workstation must contain same copy of JDeveloper project (JPR file)
    - Toolbox Tutorial project
    Steps:
    Workstation 1
    1. Go to Tutorial.jpr project -> Business Components -> oracle.apps.fnd.framework.toolbox.schema.server
    2. Right click package then select New View Object.
    3. Proceed with the creation of the View Object using wizard.
    4. Name the View Object as CustomerSupportVO
    5. Select EmployeeEO and AddressEO.
    6. Select all possible attributes.
    7. On Step 6 of wizard, check Generate Java File for View Row Implementation.
    8. Click Finish.
    9. Save Project.
    10. Copy CustomerSupportVO.xml, CustomerSupportVOImpl.java, CustomerSupportVORowImpl.java to shared folder.
    Workstation 2
    1. Copy CustomerSupportVO.xml, CustomerSupportVOImpl.java, CustomerSupportVORowImpl.java from shared folder to Workstation2/JDEV_HOME/myprojects/oracle\apps\fnd\framework\toolbox\schema\server.
    2. Go to Tutorial.jpr project -> Business Components -> oracle.apps.fnd.framework.toolbox.schema.server
    3. In the System Navigator, click on Add to Tutorial.jpr icon.
    4. Select CustomerSupportVO.xml then click Open.
    5. Click ok when prompt to add View Object’s components.
    6. Right Click on CustomerSupportVO from Business Components.
    7. Select Edit CustomerSupportVO.
    Can you let me know if there is a more simple workaround?
    Thank you in advance,
    Dan Cretu
    EMEA ATG team

    I had faced similar issue earlier. I just copied the VO query(and all necessary information) and removed it (deleted) from the project. Upon recreation of the new VO (same name) the issue was resolved.
    Not very sure as to why the VO.xml got corrupted in your case, but this solution works.
    Thanks

  • How to copy/move Portal database from one machine to another?

    I am receiving a ORA-22973 error (size of object identifier exceeds maxmum size allowed) on the wwsec_enabler_config_info$ table when attempting to import my entire "portal30" schema from one database to another on different Windows NT Servers.
    Background: I had Portal 3.0.9.8 installed, configured, and running with the following setup:
    Machine 1: Windows NT 4.0 SP 6, Oracle 9iAS 1.0.2.2, Oracle Portal 3.0.9.8
    Machine 2: Windows NT 4.0 SP 6, Oracle 8i Database 8.1.7.0.0
    We no longer have use of Machine 2 and needed to move the database over to Machine 1.
    I performed the following steps:
    1. Installed Oracle 8i database 8.1.7.0.0 on Machine 1.
    2. Set up the tablespaces in the database on Machine 1 to match the same names and sizes of the tablespaces in the database on Machine 2.
    3. Used the Oracle "exp" command to export the entire database that resided on Machine 2.
    4. Copied the ".dmp" file to Machine 1.
    5. Used the Oracle "imp" command to import the entire database on Machine 1.
    6. The import completed successfully with warnings. But I had received the ORA-22973 error during the import process.
    7. After it completed I compared the list of tables and packages in the "portal30" schema between the two databases. The wwsec_enabler_config_info$ table is missing.
    8. I tried to export and import only the wwsec_enabler_config_info$ table between the two databases, but continue to receive the ORA-22973 error.
    Without the table being created, access to the portal cannot be achieved.
    Here are my questions:
    1. Is there anyway to create the wwsec_enabler_config_info$ table without receiving the noted error?
    2. Is there any other workable way to get the portal database from Machine 2 to Machine 1?
    I am aware of the portal import/export utilities but that would require me to run through the 2 hour install of Portal 3.0.9.8 on the database on Machine 1 and then individually export and import all the portal components (security, pages, applications, content library, etc). I merely wanted to transfer the entire database from one machine to another, so I felt the Oracle exp/imp utilities would be quicker and less work.

    Hi,
    I've been hitting problems with Portal 3.0.9.8.1 against 8.1.7.2.1 on NT - i.e., Intermedia not working at all, and have been advised by support to move back to 8.1.7.1.1.
    I don't want to lose any of my content in the Portal since the db upgrade and am wondering on what is the best way to do this.
    The version of the Portal will be the same so I am hoping I can just use the Portal export and import utilities, as afterall, it is just data and the schema structures are the same between db versions. I'm also hoping that the Portal export doesn't use the standard Oracle EXP tool as it doesn't work anymore on 8.1.7.2.1 on NT!!
    Regards,
    John

  • Recovering data from one machine to another

    Hi all;
    I've mentioned this in another thread but would really like to deal with it. Recently, I had to move my iPhone from one machine to another. All was well and I managed to move all my apps from one machine to the current one. The problem is with a purchased app called TripLog that stores data on driven mileage. On moving the app over, I didn't get the data.
    I contacted the software people and this is what I got:
    "As far as data, the iTunes software automatically backs up all data to the desktop. The "Apple data" (contacts, calendar, etc) are backed up to the corresponding desktop apps (Address Book, iCal, etc) but data from "3rd party" apps are backed up in an encrypted, totally nonaccessible (to anyone but iTunes) format. That is used by iTunes when you do a "Restore".
    "I would call Apple tech support if I were you, because unfortunately, that's all we know. The data IS somewhere on the desktop (I believe) but how you could transfer it to a new handheld I have no idea."
    So the question is, Where is that data stored? In my user/Music/iTunes/Mobile Apps folder there were three versions of this app. I tried moving them all over and kept getting dialogs asking me if I wanted to repace an older version with the newer ones I was moving over. Since my iPhone and the new host computer didn't have TripLog I assumed I should replace but now I am not sure.
    I can stil move over these files, but I have a feeling that they are not data so much as simply the app itself. Where is that data stored?
    For the record, I have moved files from an iMac G5 to a Macbook running 10.6.1 and iTunes 9.0.1 with an iPhone 3G running 3.0.1
    Help?
    Stan

    Many thanks!!! One more question; do I just move that file over and drag and drop or do I need to do an import into the folder, "Automatically Add to iTunes?" Further, will this affect all my data on the phone? For example, I have synced and made changes in things like iCal, Address Book, Mail, etc. Will the last few days be wiped out or replaced by the moved-in data?
    Stan

  • Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail.

    Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail.  Is there a fix? Also, when I tried to update, it comes up with this error.

    I have a similar problem. I found out that my macbook air created a new USER with my former's computer user name. You can check that by going into System Preferences -> User & Groups, and see if a "Other user" has been created. You have to login under this new USER to find your transferred contacts in the address book.
    My problem is that I do not know how to merge the 2 USER logins or transfer the data from the new USER created into the existing one.

  • How do I properly transfer CS from one machine to another

    I want to remove my apps and license from one machine and move to another. I uninstalled CC, but the apps are still on the machine and functioning? Will I be able to move to a new machine without trouble?

    There might not be a need to depending on your preferences.  You are allowed to have two working installations, so you could keep the original as a backup if you like.  If not, then you need to sign out of the original thru the manager.  As far as getting the software on a new machine, you need to install them using installation files the same way you installed originally... moving software from one machine to another does not work.
    Download/install the desktop application, sign in, install the subscription application(s).
    Creative Cloud Help / Download, install, update, or uninstall apps
    https://helpx.adobe.com/creative-cloud/help/install-apps.html
    Creative Cloud Help / Creative Cloud for desktop
    https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Activation & deactivation help
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
    Creative Cloud Help / Install, update, or uninstall apps
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    Installing Creative Cloud Apps
    http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

  • Migrating KMS server from one computer to another

    Hi,
    I would like to know how to migrate the KMS from one server to another. Thanks in advance

    Steps to migrating the KMS:
    1. Uninstall the KMS host key first by running the following command:
    slmgr -upk
    2. Then, install the default kms key by running the following command:
    slmgr /ipk [KMS Client Setup Key]
    The default KMS client setup keys can be found here:
    http://technet.microsoft.com/en-us/library/cc303280.aspx
    3. Delete the record from the DNS:
    Open DNS console:
    Expand _tcp node under the domain.com. There will be a record _VLMCS. Delete this record.
    4. The KMS server is uninstalled.
    5. To install KMS on a new server, enter:
    cscript C:\windows\system32\slmgr.vbs /ipk <KmsKey>
    then to activate the KMS host, enter:
    cscript C:\windows\system32\slmgr.vbs /ato
    6. After activation is complete, restart the Software Licensing Service.
    7. Verify that the record is created for the new server in the DNS.
    To verify that the KMS host is configured correctly, you can check the KMS count to see if it is increasing. Run slmgr.vbs /dli on the KMS host to obtain the current KMS count. You can also check the Key Management Service log in the Applications and Services Logs folder for 12290 events, which records activation requests from KMS clients. Each event displays the name of the computer and the time-stamp of an individual activation request.

  • HT4527 I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process.  I have iTunes 11.0.1.12 on both computers so the help screenshots do not help a

    I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process.  I have iTunes 11.0.1.12 on both computers so the help screenshots do not help as such

    Then stop trying to use HomeShare and use one of the other options listed in the document from which your question was posted.

  • How do I transfer a CS6 Standard license from one Mac to another?

    How can a transfer a CS6 license from one system to another?

    You simply install properly after you have deactivated on the old system.
    Mylenium

  • How to transfer DATA from one machine to another using  DBlink

    I want to transfer data from one machine to another both having oracle 8.0.5 with AIX operating system using DB link. CAn any one help me in this task

    Step one - Create and test SQLNet connections between the databases.
    Step two - Create at least on database like from one database to the other:
    CREATE DATABASE LINK linkname
    CONNECT TO user identified by password
    USING 'tnsnamesentry';
    Step three - use the dblink linkname in dml statements eg:
    insert into emp@linkname
    (select * from emp);

  • Best Practice for Migration of BO  from one server to another

    Hi All,
               I would like to know what is the Best pratice for Migration of BO from One server to another.
    i have Installed BO Xi R2 on my server.
    Thanks,
    Anendu Bothra
    Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

    You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
    Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
    Choose Copy, then click OK.
    Choose the version information for the source CMS database.
    Select the database type for the source CMS database, and then specify
    its database information (including host name, user name, and password).
    Select the database type for the destination CMS database, and then
    specify its database information (including host name, user name, and
    password).
    When the CMS database has finished copying, click OK.
    Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
    I'd advise taking full backups beforehand.

Maybe you are looking for