Trying to modify the new nanokontrol template for logic 8
hi folks,
I'm using Logic Pro 8, and I just got a Korg nanoKontrol. I installed the plug-in that Korg put out last month, and it works great, execept I want to change one thing. I never use the Cycle Mode button, but I use Undo all the time when I screw up a take and want to start over. I would like to change the Cycle button to Undo, but the assignment window and learn mode aren't letting me for some reason. It looks like it should be easy and intuitive, but the obvious method just doesn't work. can anyone help me out with this, or at least verify if it is possible or not? thanks!!
alright, I've learned that OSX commands can't be assigned to MIDI, and also discovered the 'Discard recording and return to last play position' command that does the Undo thing, only better, so I guess I answered my own question.
in the meantime, I deleted the template and tried to reinstall it, and completely failed, but that's a whole other discussion!
Similar Messages
-
I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR -
I just tried to upload the new operating system for my I phone 4s , I get to the terms and conditions, when touch "agree" it opens up and I touch agree again and it closes and nothing more happens
Reset and start all over again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Trying to install the new itunes/borjour for windows 64 but neither install
I downloaded the current version of itunes for windows 64. I received a message to install Bonjour and did so.
I have 2 Bonjour items in Programs and tried to uninstall the one dated 2010 but received the message that this program is for 32bit and to go get the download/bonjourforwindows. html, which I did when itunes was downloaded and this version will not 'uninstall'.
I tried to open the Bonjour Printer Wizard and received a message "Bonjour service is not available".
Also, itunes is still version 9.1.1.12.
HELPNo one can help you if you cannot or will not provide specifics of the issue.
TechnicallyLost wrote:
then gives me an error message that says it wasn't able to finish because an apps file or something was not located.
You might as well not even ask for help if that is all the detail you can or will provide... that statement is completely useless.
Would you take your car to a mechanic and simply say "it just doesn't work"? -
Hi there
I have up-dated LR to the latest version and like to use the plug-in for the import from the Aperture library. I follow the steps suggested by an article, have saved all picture into separate folders (folder = project name) and still, after the analysis of the library, the "import" button disappears and I am stuck and can't import.
Any ideas what can be done/must be done to get this working?
Regards
DiethardI am having the same issue, i've selected my Aperture library, and the "import" button does not activate. Any idea how to fix?
-
I will begin the download and it gets hung up on 25% and eventually the installer will just close itself. I have checked all of the recommendations, i.e. the browser preferences and deleting the filing and starting over. Help?
First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
then you must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57 -
Can you help?
my iphone is connect to itunes cz there is an icon on my iphone that tells < connect the iphone into the itunes> thats all..the problem now is when am trying to download the new ios software for some reason on 90% the item that am downloading its gone!!! but my iphone still telling me to connect the iphone into the itunes!! and somethimes my iphone swichting off and then swiching on again!! and the icon still there!!
-
.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.
You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily. -
I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?
with a little patience - people all over the world are downloading mavericks.
alternatively you could restart your computer and try again -
"Unable to connect to server" when trying to accept the new terms and conditions for iCloud.
I keep getting "Unable to connect to server" when trying to accept the new terms and conditions for iCloud. What can I do? I can access the internet, but my clash of the clans applications is failing. The problem started January 1, 2014
I just figured out the problem with my grandma's iphone.
Settings>iCloud>Delete Account
IT WILL NOT DELETE YOUR ACCOUNT. it just takes it off the phone. then you can log back in, and BAM, You're good I hope!
Hope this helps. -
Like a fool I tried to download the new software for my 3GS. Now oI can't get the dam thing activated. I'm in Portugal but my phone originates from the UK. Help.
I actually interpreted this as a carrier lock issue. If that is the case the OP needs to contact the UK carrier who owns the rights to lock the iPhone. Only that carrier can unlock it.
Was the iPhone unlocked by means of jailbreak software? If that is the case, then the reply from Phil McCafrey would apply to this as well. -
I have about 80,000 photos on my Mac. I wanted to use icloud. I needed to download the newer version so, for 14.99 I downloaded. Problem is, now I have lost my photos! I tried 3x to but it always stops working. HELP!
What version of iPhoto did you have before upgrading to Mavericks and iPhoto 9.5?
OT -
I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?
In other words, the upgrade process did not go altogether well and the device has lost all its contents. When you plug it in, they will be restored from the backup.
-
Hepl I tried to download the new version of Itunes but it came up with the message service apple mobile failed to start verify you have sufficient privledges to start then my computer froze altogether and I had to end task , which wiped my existing itunes and same message keeps popping up when I try to install how do I get my itunes reset up and do I lose all my music ?
Hello, dindillon.
Thank you for visiting Apple Support Communities.
Here are the best steps to help you resolve this issue. This will not modify your media library.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H. -
How to modify the email remittance template
Hello,
We have a requirement on modifying the email remittance template. We are looking to add a new fields in the remittance detail section. How do we do this?. Any inputs are highly appreciated.
Thanks,
SushmaWhat exactly are you trying to edit in the template? The Table of Contents can be edited like this: http://total-bi.com/2012/09/briefing-book-table-of-contents-page/
Please mark if helpful/correct.
Maybe you are looking for
-
Three questions re Acrobat 9 Std fillable forms
I am creating 2 fillable forms in Acrobat 9 that I want to post as links on my website. Data will be sent to Acrobat.com for collection. My questions are: (1) How do I get the link(s) to post on my website? (2) Is there a limit as to how much data ca
-
Joining Multiple facts to the multiple Dimension tables
Hi All, We have multiple fact tables which are Joined to common Dimension tables. We join them in physical layer and maintain Left outer join in the BMM. I do not get any consistency errors. But when I run report I get error. "could not find level de
-
Create Smart Collection for Photos Without Lens Profile Applied?
The subject pretty much says it all. Is there any way to create a smart collection of photos that have not had lens profile corrections applied?
-
Reinstalling Safari on OS 10.5.8
Hi Everyone, A while back I deleted my Safari program as I opted to use Firefox instead. Now I have discovered that it may be a better browser to access certain webinars I need to participate in. I have tried to download a version appropriate for m
-
Hi All, I am using BIZTALK RFID server as a device controller and BIZTALK SAP Connector to send the PML message to AII. I have added the component(SAP Connector) in BIZTALK RFID server and I have to do the URI setting to point AII listener, something