Trying to not save artboard when exporting or using save for web and devices

Hello,
I am using AI CS5 and I am trying to save a logo that is on an 8.5 x 11 artboard.  When I try to export or 'save for web and devices', I am getting the entire artboard to be saved - not just the logo like I want.  I have never had this issue in CS3, and just started using CS5 so I am not sure if there is a new feature that I need to be turning off to just save the logo instead of the entire 8.5x11 page.
Any help is appreciated,
Kristie

Thanks!  It was under the object - slice.  You've saved my sanity

Similar Messages

  • Error when trying to "Save for Web and Devices"

    Hello All,
    I have a little issue with Photoshop CS3 on the XP Pro platform.  I get the error when I try and "Save for Web and Devices".  This is the actual error.  "the exception unknown software exception"  uhh... lol
    I currently work for a school district.  I'm the Tech/Network Admin for the entire district.  We have a lab setup with some new PC's (As of last June)  They all have 2 gig of ram Core 2 Duo 2.4 ( I think).  Pretty good machines.  We currently have an image built for them so essentially they are all the same builds.  We recently just updated the image as of a month ago.  In talking with the teacher who does the tech classes in this lab, he recently ran into this problem as of a week ago.
    We are a Novell based campus.  Zen 7 support pack 7 I think as well.  We do however lock down the machines.  Dynamic Local users.  Everything gets pulled off the machine when the user logs out.  Now I do sort of think that this issue is related to some type of policy we're pushing down because when we use our "Tech" account which does have local admin rights to the PC we don't get an error.  We haven't modified the policies here in quite a while.  School is almost over and we'd like to relax for a bit and not cause any problems.  LoL
    And in fact all the PC's in our High School have this issue.  And currently we have about 3 different models not including the one I listed above.  Any advice is much appreciated.  Cause I'm pretty stuck on this issue.
    Thanks,
    Jesse

    Save for web and devices saves its own prefs to retain the last active settings. When it can't do that, it will fail. You may wish to grant write permissions to the Documents and Settings\App Data\Adobe\ Save for Web folder. The same applies to Device Central...
    Mylenium

  • When I save for web and device in Illustrator, I see all the pixels... What is wrong?

    I have created a vector image. When I save for web and device in Illustrator, the image does not come out clear even if I'm saving the image the same size as the artboard. I can see the coutours (pixels)... I've opened the file on another computer and everything is perfect. What is wrong on my computer?
    I have reinstalled the program and did all the updates. What else can I try?
    Thank you!

    So that you know next time that option is no longer available so to speack it is now under a dropdown wiht the default none then Type Optimized or Art Optimized in CS 5 and operhaps CS 4 as well

  • PS CS5 Save for Web and Devices reports "The operation could not be completed"  ?

    I teach in a lab of 27 computers, 110 students and part of the curriculum is teaching students to "Save for Web and Devices" this year for some strange reason none of my students can access "Save for Web and Devices"  they get the error message "The operation could not be completed-A write permissions error has occured."
    It has stumped our district top network support guru.
    We are running PS CS5 12.0.4
    He tried this posted fix but it did not work
    http://involution.com/2010/06/13/adobe-photoshop-cs5-write-perimissions-error-on-snow-leop ard/
    It worked once last Friday but today it failed, I'm getting very nervous about being able to prepare my students for the ACA exam without this function.
    In a discussion forum they suggested "zipping and deleting" the save for web preferences, I tried that.  Shut down Photoshop reopened it and that did not work.
    I am at a loss.  Seems like a bug.
    Any ideas.
    We are using iMacs running  Mac OS X  10.5.8

    The error message may not simply address the location to where the students will save a single file. The error likely applies to the temporary location where the various optimized versions might be automatically saved as you preview the image as JPG/PNG/GIF. I would wager that you would not see this error when you are logged into one of the students' computers as an admin.

  • Save for web and devices not selectable

    Hi, I cant seem to select the "save for web and devices" option in the 64 bit version of photoshop CS5, but it works on the regular version, and I never use the regular version, all my preferences are on the 64 bit version and too many have been changed for me to be comfortable to start using it instead of the 64 bit one. Is there a fix for this to work again?

    Hi there,
    If Silkrooster's suggestions don't help after verifying the image mode you are using, you may try to restore your Photoshop preferences. See the video below for easy-to-follow instructions:
    Julianne notes at the 5-minute mark that the second method she outlines will get rid of your color settings, keyboard shortcuts, workspace prefs, etc. This may affect the preferences you mentioned being accustomed to in your post, so please keep that in mind.
    If that doesn't solve your issue, either, you may need to troubleshoot User Permissions by following the instructions at one of the links below, depending on your OS:
    Macintosh: http://www.apple.com/findouthow/mac/#useraccounts (Be sure to change the “New Account:” pop-up from [Standard] to [Administrator] when creating the new user)
    Windows XP: http://kb2.adobe.com/cps/404/kb404859.html
    Windows 7: http://helpx.adobe.com/x-productkb/global/create-local-administrator-account-windows.html
    I hope this helps!

  • When i 'save for web and devices' in illustrator, the resulting jpg is cropped

    Has anyone run into this before?  I'm trying to 'save for web and devices" in illustrator, but the resulting jpg doesn't show the whole artboard.  its cropped off some of the top and bottom.  my file is a simple box with text inside.  no other graphical elements of any kind. 

    Thanks Monika.  I have a 3.25x3" artboard that has just text on it.  I selected "save for web and devices" and the preview window shows the artboard smaller than actual size so some of the text is cut off or pushed to the edge.  I saved it just to see what would happen and the resulting file is just as was with the preview.  I also tried doing a 'save as' for the jpg and same result.  Oddly, I outlined the artboard with a box and the jpg came out fine.  Any ideas?

  • "Save for Web and Devices" does not highlight in my Mac CS5

    I cannot even get the 'Save for Web and Devices' to work at all. It does  not come up as a highlighted choice on my Mac CS5 for any image file  format. I've tried in 64 and 32 bit. I wish I had stuck with CS4 until  CS5 worked. Anyone got any tips?

    1) You can run multiple releases on the same system. This is especially useful if you have an established workflow and you need to ease into an upgrade,
    2) You can download a trial of CS5 before blowing £200 to see if it does all that you need.

  • Illustrator CS5 15.0.2 crash when Save for Web and Devices (Mac)

    Hi baffled with this.
    When Saving for Web and Devices in Illustrator CS5 (15.0.2), the application now freezes and has to be force quit.
    HOWEVER if I delete the Users/~/Library/Preferences/Adobe Illustrator CS5 Settings/en_GB folder all works well until I quit the application, then the freeze will happen again. I had this happen before so under the advice of Adobe I created a new user and all was fine for that user so I transferred everything across... a laborious task.
    So my question now is why now?... what has triggered this AGAIN?...
    Hope you can help... anyone.
    Running:
    Mac OS X 10.6.6
    Mac Pro tower.
    Note:
    have uninstalled, reinstalled, updated 15.0.1 - 15.0.2
    have deleted all font caches
    have deleted everything... that could be related...
    HOWEVER have narrowed it down to the 'Adobe Illustrator Prefs' file in the Users/~/Library/Preferences/Adobe Illustrator CS5 Settings/en_GB folder
    Please too note this is not the folder permissions issue, am aware of that and have thoroughly checked all permissions, ran disk utility and disk warrior.
    thanks

    If you use cocktail I suggest you get rid of it it can cause serious problems if you select the wrong settings, instead download ONYXwhich is free and will not harm your system or corrupt anything by deleting something you actually need.
    I hit the wrong setting using cocktail and it locked me out of all of the hard drives installed or connected to my Mac it is very dangerous. And I cannot imagine a reason for a setting that would protect your hard drives from yourself to the point of not recognizing your own password.
    I know it cost money and has advanced settings but having the ability to kill your system is crazy.
    Also to repair your permissions use the disk utility or ONYX as the permissions can become changed when installing software or if cocktail changes it locking you out of folders etc.

  • Exporting animation using Save for Web and Devices problem

    The animation plays as it should when the "Play" button is pressed at the bottom of the "Save for Web and Devices" Menu , but when I Preview it the individual frames don't disappear once they've shown , so you can see them all at the end of the animation . This is also how they save as a .gif ( although using the "Save as html" option reverts to looking as it should , each frame appearing and disappearing in turn) How do I save as gif without this happening?Many thanks for any help

    Thanks!  It was under the object - slice.  You've saved my sanity

  • Save for web and devices, .png (trying to make an icon)

    I'm trying to make a 57x57 px .png file for an iPhone icon.  I'm pretty new to Illustrator, but have been watching some videos/tutorials online.  I started with the default Print document, and made my icon that looks ok.  Nothing fancy, just an ellipse, another ellipse inside of it, and some icon inside the two ellipses.  (the two ellipses serve as a ring around my icon).  After creating the ring+icon, I put a colored square behind everything for my background color.  The total size is 382x382.  I created a new Print document to be 57x57.  I copied and pasted everything from the first 382x382 image into the 57x57 file, and shrunk the 382x382 to 57x57.  I then Saved for web and devices, selected PNG 24, no transparency, and I got my image. 
    When I look at my image at this size, it looks pretty bad.  Like even for the ellipse parts, it looks like it's grainy and that there are jaggies.  When I look at other iPhone icons, they just seem so much more smoother and fluid.  Is there something I'm doing wrong with saving or shrinking that I need to take into account for?  Or are there standard stroke sizes that should be used to get a smooth circle?  Thanks!

    The smoothing process is called anti-aliasing. It fills in the border pixels with a shade of gray, giving the illusion of a smooth curved object.
    That being said, keep in mind the smaller in size pixels wise, the harder it is to keep the quality.

  • "Save for Web and Devices" button not working anymore

    I can't use the Save for Web and Devices button anymore. Is there a reason for that, I didn't pay 500$ for a software that won't work.

    Hi Mylenium,
    I use Windows 7 Professional 64-bit.
    As for what I did for it not to work anymore, I did nothing at all. This happen in two steps from what I remember, first the button was working but it was not opening the usual window with 4 different file types you can save the image as, it was giving me an error window that said something in the lines of "Could not initialize". Afterwards, the "Save for Web and Devices" link just became greyed out, and was just un-usable. It's not making sence that I did nothing and the software just does not work properly, I'm wondering if any of the other software in the suit that I purchased do the same thing, and is there a way to fix this.

  • Photoshop CC closes or freezes when saving in save for web and devices

    Hello,
    Since I have a new laptop with Windows 8, I couldn't get Photoshop CS6 anymore, so I downloaded PS CC.
    It's working great the last days, but since yesterday PS freezes or closes everytime I try to save a .gif in save for web and devices.
    It drives me insane...
    I hope someone can help me.
    Thanks in advance.

    Trash the Save for Web prefs in the respective folder (C:\Progrom Files\Common Files\Adobe or your user home directory).
    Mylenium

  • Strange quality issues when saving for web and devices.

    Im a UI designer and spend lots of time working with illustrator and photohop. When I design I normally create vector mockps of my work and then export slices using artboards and save for web and devices. Yesterday Illustrator started having problems exporting files. The files look good on my computer, when viewed with pixel preview mode but when i export they look really bad. here is an example:
    This is a screen shot of a part of a mobile app im working on at 100 % and 200 %
    here is the same area when exported using "save for web and devices" at 100% and 200%:
    as you can see there is a dramatic loss in quality. the icons look almost like a low color gif...
    Here is what I have tried already:
    I have tried changing the settings in the exporter. I normally use png 24 but I have tried all the different settings and they all do about the same thing. the only one that seems to look ok are swf and svg.
    I have copied my files over to photoshop and exported from there. that works fine but it is a pain.
    any help would be great.
    Eli
    www.elilang.com

    Here is a screen shot with transparence off and art optimized... still not working.

  • Save for Web and Device Grayed menu grayed out

    Using Photoshop 11.0.1 (CS4) and Mac OSX 10.5.6), I have an action that saves a retouched file first as a high quality jpg and then as a optimized jpg for the web. It has worked fine in the past, but today when running the action I received a warning that the Export command was not available. I tried manually exporting the using the Save for Web and Devices menu item, but it is grayed out and not available. The file is sized to 1024 pixels on the longest side, no layers and in 8 bit mode.
    So far I have done the following:
    Trashed the Save for Web preference file
    Repaired permissions
    Scanned for viruses
    Rebooted the system
    Any other ideas short of a reinstall?

    mcohran wrote:
    Any other ideas short of a reinstall?
    Trash Photoshop preferences.
    Repair Permissions.
    Check on available disk space.

  • Photoshop crashes when saving for web and devices

    When hitting saving for web and devices, Photoshop starts to render images but before it's done, it crashes. I get an error-popup with no text and the screen where normally the animation is shown is red. Then Windows comes with a crash report and I can only quit Photoshop.
    I have an animation of over 150 frames, but just some black and white lines, no color.
    I'm using Photoshop CS 5.5 on Win7.
    I tried deleting the preferences in AppData/Roaming etc, but no result, still crashes.
    My Photoshop is also updated to the latest version.
    Help?

    Ok, here's a crash report from Windows (not sure which I should post so just gonna post them both..)
    Naam van toepassing met fout: Photoshop.exe, versie: 12.1.0.0, tijdstempel: 0x4d90cf71
    Naam van module met fout: Save for Web.8BE, versie: 12.0.0.1, tijdstempel: 0x4d90d758
    Uitzonderingscode: 0xc0000005
    Foutoffset: 0x002d2e96
    Id van proces met fout: 0x1f4c
    Starttijd van toepassing met fout: 0x01cdb1fca2dd8dcb
    Pad naar toepassing met fout: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Photoshop.exe
    Pad naar module met fout: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\Import-Export\Save for Web.8BE
    Rapport-id: fa9784f8-1def-11e2-a242-00238bb26d31
    Photoshop.exe
    12.1.0.0
    4d90cf71
    Save for Web.8BE
    12.0.0.1
    4d90d758
    c0000005
    002d2e96
    1f4c
    01cdb1fca2dd8dcb
    C:\Program Files\Adobe\Adobe Photoshop CS5.1\Photoshop.exe
    C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\Import-Export\Save for Web.8BE
    fa9784f8-1def-11e2-a242-00238bb26d31
    Where can I find a Photoshop Crash Report?

Maybe you are looking for