Trying to open a project from Elements 3..in PRE 6???

Ok folks don't laugh..but i'm teaching my daughter to edit...she had a fun school project built in Premiere Elements 3....after she added her music clips...the program crashed...
Now im trying to open/finish project in Premiere 6....doesn't look easy as of yet...any ideas
Running Windows xp
Thanks

Completely different software... and I think P6 is also older than PE3... I doubt you will be able to open a PE3 project in P6
You will either have to create a new project in P6, or figure out why PE3 crashed
Most of this (below) is for Premiere Pro... but many of the questions are common to all problems... plus a link at the end about PE crashing
More information needed for someone to help http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
And, finally, the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Premiere Elements Hang/Crash http://forums.adobe.com/thread/792580?tstart=0
Reset Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169?tstart=0

Similar Messages

Crashing when trying to open a project / forgetting where media files are

I spent all day manually locating hundreds of missing 'offline media' in a project, saving as I went. Premier Elements crashed when this was complete, now I try to open the project after rebooting and it either cannot find them again or crashes when trying to open the project. Anyone got any clues as to how I can fix this?

alex peatfield
What version of Premiere Elements are you using and on what computer operating system is it running?
How long has this issue existed?
Are you moving, deleting, renaming files and folders that go into a project after the project has been saved closed?
If you have source media stored on an external hard drive, determine if the external hard drive is malfunctioning, including if its drive letter
changing.
Lots of drill questions...
a. Running the program from a User Account with Administrative Privileges?
b. Latest version of QuickTime installed on your computer?
c. What are your computer resources and is your computer optimized?
d. What are the properties of your source media that are involved in this issue?
e. Where are the Scratch Disks directed and how much free hard drive space is at those locations?
f. Do the problems exist with and without the antivirus and firewall(s) disabled?
Let us start here and then we can decide what next.
Thanks.
ATR

Robo HTML 9 will not open our project from Source Control after initial start.

We have a project in version control that we have been using forever, since 2003 or so and many versions of RH. Now that we have upgraded to 9, this project will open the first time in version control and work normally. Once you close the project and attempt to reopen from the starter screen, it opens just great, just not in version control. The files are still set to read only. I have done this several times and the only way i can work on my project in version control is to act like i am opening a project from scratch, then it needs to overwrite all of my local files with the server files. It would not be so bad but I am 3000 miles away from the server and 13 hops plus a slow firewall on the other end. While this has never been a problem in the past it is a big problem because it takes hours for all the files to download and overwrite my local files.
This only happens with RH9 and Version Control 3.1. RH8 works no problem. So, I don't know if this is a RH9 starter problem or a Source Control Problem. Maybe I will make a similar thread in the RH area. I'll wait to see if I get any useful hits from this one first.
It is very strange, I had RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so the heat is less right now but today, it opened with no source control. If I go to Source Control the only thing i can select is put project in source control. That is how it got into source control after converting to RH9.
We have another project that seems to open from version control normally but we can only save topics in HTML view. No useful answers to that topic after a week.
Got any ideas???
I have tried different folder names, different paths, etc.
Thanks,
dv

Ok, here is a wierd one, I used the add to version control icon in the menu bar, It already knew the path so I figured I'm the only one who has been editing these files for the past few days so I clicked add to version control. It added it. I closed and reopeded and still had the same files checked out. Closed, checked in all, then reopened and it is working in SourceControl. Strange that after opening from source control and closing that you need to reopen and tell it to put the project into source control. Obviously some flag is not getting set somewhere. This might help others having problems reopening source control files.
dv

Error trying to open a project

Hello,
I am trying to open a project that was created on the same system I am trying to acces it . But, I keep on getting an error:
This project is unreadable or may be too new for this version of Final Cut.
The thing is that I started this project on the same computer I'm trying to access it from. I tried copying the project file and opening the file on another system and it worked.
Please help

http://www.larryjordan.biz/nxltrs/nxltr_44.html#gotchas
Shane

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

Error when trying to open new query from Bex

Hi guys,
I m trying to open query designer from Bex explorer and i get the following error: The macro 'sapbex.xla!reponewquery'cannot be found.
Can anyone please tell me how to rectify this? thanks in advance

Sunil,
Go to Business explorer>Analyzer>Business Explorer-->Installation check and click on Start button.
You will be able to know if its properly installed or not.
Also check note 197460;938540
-Doodle
Message was edited by: Doodle

I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options. I'm running iOS 7.1.2 and iBooks 3.2. Thanks for any ideas!

On my iPad, I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options. I'm running iOS 7.1.2 and iBooks 3.2. I have rebooted the iPad and that did not help, and reinstalled iBooks, which also changed nothing. Thanks for any ideas!

Yup, it was uploaded to our school Wiki as a PDF, and Pages did open it. I was then able to move it to iBooks, but I'd rather avoid the extra steps.

Trying to open a file from an older version to a new version of indesign

I'm on am mac and i am trying to open a file from the 2014 indesign with 2015 software, i am getting this error:
what i don't understand is why a newer version can't read the file of an older version

That is exactly the opposition of what you are trying to tell us.
Correct is:
You have Adobe CS6, version 8.x.
You get a file from someone else, who has Adobe CC 2014, version 10.x.
You are trying to open that file on your computer.
But because that file was created in a later version, you get this message.
Either ask to get an IDML file (with a PDF), tell them, they should go to File > Package… and check IDML and PDF export.
Better would be, if you also subscribe to the Creative Cloud to be up to date with the latest version.
But what you should do anyway, update your InDesign CS6, as there are updates available which will correct this error message, as from CS7 upwards no CS exists anymore.

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Error while trying to open a project I made on my computer/file format new

I am trying to open a project I made in June in FC. It is loading about 33% then a message comes up:
FILE'S FORMAT is TOO NEW FOR THE APPLICATION. Why is that? WHat should I do? It was made in my FCP on my computer.
Ellen

What version of Final Cut Pro do you currently have?
Look in the Finder or at the FCP startup screen to find out.

When trying to open an image from LR4 in Photoshop CS5 I get a message asking me to download Camera

When trying to open an image from LR4 in Photoshop CS5 I get a message asking me to download Camera Raw 7.0. This is not on the Adobe web site. When will it be available?

<moved from Adobe Creative Cloud to Bridge General Discussion>

I'm trying to open sound effects from the recource page and there's no waveform

I'm trying to open sound effects from the recource page and there's no waveform

What version of Audition are you talking about? Going from memory, there was a change to how things worked (starting at CS6 maybe?) from their being a "resource centre" to a "Download sound effects and more" link on the help menu. Exactly where that leaves owners of earlier versions would, I think, be a question for Adobe, not a user forum (though there are some pretty clever people who visit here.

After Effects CC: how to retain Camera Raw's settings when opening the project from a different drive

I want to open a project from a drive which is different than the original one, but which has exactly the same folder structure and files as the original drive. When opening the project, all files appear as missing because the drive is different. When I replace these missing files for the ones in the new drive, After Affects relinks all media. However, the camera-raw settings that were embedded in such files are lost: After Effects opens the files as no previous camera-raw correction had been done. Is there a way to avoid this?

What could be in my project that makes it unable to open?

Trying to open a project from Elements 3..in PRE 6???

Similar Messages

Maybe you are looking for