Trying to open I tunes but keeps saying msvcr80.dll is missing
Trying to open I tunes but keeps saying msvcr80.dll is missing
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
I got an update from Apple Itunes for update I tune I try to download which I did but when I try to go to my Itune Library I can't go in statment of MSVCR.dii is missing and I have to go back and down Itunes again . So some guide me to what is going on I don't have a Apple computer It an HP TouchSmart Series PC
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?
Solving MSVCR80 issue and Windows iTunes install issues.
-
I have a file that is something I recorded on my camcorder. I am trying to open it and it keeps saying that a required codec isn't available. This is the name of the file. M2U00001.MPG. What can i do to get it to play.
The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0
-
I had just updated my Mac to 10.6.1. When it finished, I had tried to open up Itunes but it says it requires 10.6.8 or later. When i had tried to update my mac it asked for my adiminstartor password. I dont know my password. Any way to reset it without using a disc?
Sure there is.
1. restart your computer in Single User Mode (by pressing Command + S during boot - see http://support.apple.com/kb/ht1492)
This will boot your OS X system in a kind of command line mode.
Note: this will not work if you have a Firmware password set.
2. when in Single User Mode, enter the following command
mount -uw /
to mount your OS X file system.
3. now you can enter the following command
passwd username
replacing "username" by your OS X user's short name. Then you will be prompted to enter the new password for that user. You will have to confirm that new password.
Note that you will not see any character showing when you enter the new password; this is expected behaviour. -
cannot reinstall I TUNES on my computer windows 7 vissta. it's worked until i updated two days ago. it keeps saying MSVCR80.dll component not found. the error 7 windows error 126. i have uninstalled and reinstalled number of times. i have no idea where or what MSVCR80.dll is or went. thank you.
The same for me. Using iTunes for years then the update to the new verison failed. Cannot find MSVCR80.dll and I did the reinstall as recommended on the error window. Disater, now I get additiona erros: Windows error 126 and Apple mobile divice cannot determine my priviledges, even running as administrator. From now on I will create a restore point before updating apple products. Never had a problem with itunes or any other Apple program in the past. I cannot find a thread where Apple reconizes the problem and is working a fix.
-
I can't open my iTunes because it says MSVCR80.dll was not found. What can I do? Have I lost my entire library? Thank you for any help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99810) -
I was upgrading to the latest version of itunes, and my new ipad mini was connected to my computer at the same time, try to sync for the first time. The upgrade crashed part way through, and now itunes won't load and I get an error message saying MSVCR80.dll is missing. How do I do about reinstalling this file?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
I can not open itunes on my computer as msvcr80.dll is missing. How to fix?
I can not open itunes on my computer as msvcr80.dll is missing. How to fix?
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
i keep getting MSCR80.dll is missing when trying to use or updaste itunes
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99765) -
I cannot update iTunes. It is giving me a error each time I tried. Upon turning on my computer I get a error message the MSVCR80.dll is missing. Thank you for any help you can provide me.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99398) -
I am unable to open itune. I get this message "Service 'Apple Mobile Device(Apple Mobile Device) failed to start. Verify tht you have sufficient privileges to start system service. I tried to download item again and was not able to do it. I got a message on my computor as I tried to down loan the new version of itunes 11.14 and I get a message to that MSVCR80.dll is missing and that I need to install it. How do I do that?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
\I have uninstalled ITunes,,and re installed it nwo prob a doz times,, If i do not get a MSVCR80.dll is missing ,, then it seems to install only to have I tunes say it was not installed correctly and error msg 7 windows error 126,,what do i do?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99575) -
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
Maybe you are looking for
-
Install 8.1.7 on SUSE 7.3
I am getting the following error when running the installer it gets to about 62% which appears to be (Linking Oracle 8i Enterprise edition 8.1.7.0.1) and then I get the following error Exception thrown from action: make Exception Name: MakefileExcept
-
How to access SOAP message using JAXP and SOAP class?
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder b = factory.newDocumentBuilder(); FileInputStream fr = new FileInputStream(args[1]); Document doc = b.parse(fr); Envelope msgEnv = Envelope.unmarshall (doc.getDocu
-
Can a default database name be configured for each individual environment?
Hi All We have an application developed in Forms 10G. The application Login page has 3 fields, one for Username, Password & Database Name. We want to pre fill the database name field with a value (e.g. TEST1) which cannot be changed by the user. In p
-
FCE finished project on iDVD photo & video quality now poor
Using FCE 2.0.3 iDVD 5.0.1 have done many movies/slide shows with great results. Newest movie, noticeably reduced quality of finished project, pixelated appearance, although I am using same cameras on the same settings! Recently clean install to v 10
-
Hi, on accounts we have a web applet which embeds google business news for this account (via http://news.google.com/news?q=%%%Name%%%&output=rss). I do not know why, but the entries are completely out of order (should be chronologic). If I use this u