Trying to Optimize disk space

I am an amateur photographer.   I have established a star-rating system which would allow me to compress most of the images I have (currently in RAW format) to a highly-compressed JPEG. These are pictures I will never print in large format so have not reason to keep in high fidelity.
I believe what I need to do is:
1)      Save all metadata to files.
2)      Export all 1-star pictures to JPEG.
3)      Delete all selected files
4)      Import newly exported JPEGs.
This seems like the long way around. Is there another way?
Using LR2 on Windows7.
Thanks
-E

Thanks so much to all three of you.
THis is really helpfull... and yes, I'll have my camera save both RAW & JPEG... I wonder about the files names but I'm sure I'll figure it out when I see it .
Thaks again!!
-Ed

Similar Messages

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Help-Erasing a Boot Camp Partition Caused 32 GB of Disk Space to Vanish

Hi
I'm a new mac user I'd I have been really happy so far, expect for this problem:
-I created a 32 gb partition with boot camp.
-I tried installing windows xp without knowing I had to format the system to NTFS during the install
The installation didnt work, and I erased the bootcamp partition.
-When I tried to create a new boot camp partition, it said my Mac HD size hard drive is 227 gb, ie the *32 gb allocated to the partition had vanished*. In addition, I could not recreate a partition because of an error message.
-I ran the snow leopard CD's disk utility and thought that I had fixed the problem.
-However in boot camp, the mac drive is still only 227 gb (missing 32 gb). I can create partitions now, and deleting these partitions does cause any additional loss of disk space.
-I tried erasing empty disk space with no luck.
Does anyone know how to recover space lost by Boot Camp?
Thanks

qcpharaoh wrote:
-When I tried to create a new boot camp partition, it said my Mac HD size hard drive is 227 gb, ie the *32 gb allocated to the partition had vanished*. In addition, I could not recreate a partition because of an error message.
-I ran the snow leopard CD's disk utility and thought that I had fixed the problem.
-However in boot camp, the mac drive is still only 227 gb (missing 32 gb). I can create partitions now, and deleting these partitions does cause any additional loss of disk space.
Let me ask a simple question. What size HD do you have in your Mac? You say you see 227 GB and that 32GB is "missing". If I add those two numbers up I com up with 259 GB. I suspect that your "missing" space is due to the inconsistencies in which Snow Leopard now reports 1 GB. In some places it reports 1 GB as a hard disk manufacturer (1 GB = 1,000,000,000 bytes). In other places it reports 1 GB as a binary number (1 GB = 2^^30 [IIRC] = 1,073,741,824 Bytes). Since I do not know of any drive manufacturer that sells a 259 GB drive, I suspect that this is just due to the differing definitions of 1 GB.

How to setup DISK SPACE alert on OEM 10g Grid Control...

Gurus,
I am trying to setup DISK SPACE notification / alert thru OEM 10g Grid Control, but so far no luck.
Can someone help/guide me on how to achieve this?
Please advice.
Thanks & Regards,
Kartik

Those two links don't say anything about "DISK SPACE ALERT" I already know how to setup notification. I suppose you are talking about Filesystem Space Available (%)
If you need to setup an alert (Notification) then i suppose you need to setup an notification rule.
Yes, these notes do not have the key word "DISK SPACE ALERT" you are looking for, but if you go through the first note CLEARLY and COMPLETELY, you should find your answer.
And he has given an example for Filesystem space available in this note, which is what you are looking for.(I think so)
Say for Disk Space, you create a notification rule for target hosts and have metric "Filesystem Space Available (%)" defined in that rule.
If you aren't talking about notifications and just want to setup an filesystem space available metic, then follow this note:
How To Setup Host Metrics For Filesystem
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=749341.1

Trying to optimize eSATA and internal disk configurations

I'm trying to optimize the HD setup on my dual 2.5GHz G5 with 4.5GB RAM
major considerations.
- massive itunes library (260GB), and big iphoto lib (25GB) as well
- lots of video editing in Final Cut with large capture files and many video exports
- regular podcasting and other media creation with all my music and photos
- need for regular COMPLETE backups
- speed
Here's the current setup. I have six disks as part of the system
1. internal 160GB disk (maps simply to a MACHD volume)
2. internal 250GB disk (maps simply to a COMMONS volume for Democracy player files, torrent downloads etc)
then on my 4-port eSATA controller card
4x 500GB SATA drives from Western Digital for a total of 2TB eSATA disk space
they are in 2 eSATA enclosures from FirmTek
I'm managing the disks with SoftRAID
Before I get into the problem, how would YOU use this incredible amount of disk space, considering the goals I have? (video, media storage, backup).
Now, The problem
I've been disappointed with the speed of my system and suspect its my HD configuration. I have enough RAM right!?
I've got some raid stripes going on
2 of the 500GB disks (disk2 and disk3) support two "active" volumes
a) a striped ATLAS volume of 800GB (holds itunes, documents, iphoto, basically all media files)
b) a striped VIDEO SCRATCH volumn of 200GB (for working files in FCP, imovie, etc)
the other 2 of the 500GB disks (disk0 and disk1) support two "clone" volumes
a) a mirror MACHDCLONE volume on both disk0 and disk1 (to protect the system drive. I run Super Duper 3x per week)
b) a striped ATLAS_CLONE volume to backup the active ATLAS volume
the COMMONS volume is not backed up in any way. figure i can live without my Democracy files and torrents, etc.
My ideas:
based on my performance observations, my setup above is just wrong, and I don't know where to turn for the best advice. Google is very poor at dealing with such complexity in search results. There are some video advice sites, but they only cover part of my problems. I have a few theories of how I should be using these drives
1. use the eSATA drives strictly for performance benefits, not for backup. consider a USB2.0 drive for backups and use Mozy for offsite backup
2. simplify the disk allocation. No single disk should support more than one volume
3. the video scratch SHOULD be striped in order to benefit from speed. and should be on its own physical disk(s) separate from ANY other function
So I'm thinking
a) stripe two of the eSATAs into a single 1 TB array for my media or ATLAS volume
- this solves me running out of space on the volume (getting closer with the iTunes video downloads every day)
- it's also just physically easier to deal with. I can SEE what drives make up ATLAS alone
- will be easier for me to eventually replace the G5 with an MBP running its own eSATA pc card with easy access to the same ATLAS volume
this still leaves two 500GB eSATA disks around
b1) I could extend the ATLAS volume to an array including a 3rd eSATA disk for a 1.5TB volume. this would allow me to bring COMMONS files onto ATLAS
b2) the remaining 500GB eSATA disk can be video scratch
OR
c1) dedicate 1 500GB disk to VIDEO SCRATCH
and
c2) partition the other 500GB disk as a clone of both COMMONS and the internal System drive
see how CONFUSING THIS IS ?
there are too many permutations of things.
I know I like keeping the system drive simple and internal. Ideally, the second internal disk would mirror this volume, but they do not match in size or brand
part of me wants to stripe all FOUR eSATA drives into a blazing 2TB masterpiece, but it seems like a bad idea to put VIDEO SCRATCH on the same array as ATLAS
Other questions:
should the itunes library get it's own disk altogether? is striping of benefit here?
are there some sites that explain HD management well?
PowerMac G5 2.5GHz 4.5GB RAM Mac OS X (10.4.9) also own a blacbook

Thanks so much for that awesome feedback.
A few points.
I have the dual processor G5, not the quad core. Purchased in Jan 2005.
My RAM pageouts are fine (didn't know what that was until you mentioned it)
Love the idea of moving COMMONS "outside the box"
I used to have my system volume boot from an external RAID, but didn't notice a big improvement, and it meant my G5 would ONLY boot if the eSATAs were powered up. I just didn't like that feel. I want the tower to work in a self-contained fashion, even if I don't have access to all media. I want access to the OS and apps.
I'm unlikely to buy more SATA controllers and enclosers or too many new disks. I'm on a serious budget and want to work with as much of what I have as possible. That said, i just checked out the Drobo and am drooling. I'll wait to see how well it performs for data access (and video) and not just storage.
It sounds dreamy to stripe all four of the eSATAs into a 1.8TB storage megaplex. I imagine they would scream in an ATLAS_BADASS volume, but then I've got nothing left for VIDEO SCRATCH used to capture and render.
The VIDEO_SCRATCH doesn't need to be large, and I think that's where I'm having a conflict. My eSATA drives are way too big to use even ONE as a video scratch, much less striping two of those bad boys just for that purpose
Purchasing a 10K drive for video scratch (or system volume) is not really in the cards yet.
So here's where I sit now:
1. My Media Storage
++ the 4 eSATA drives (2.0TB raw)
I go with the badass steroid injected ATLAS volume striped across all four.
this is my media array and holds all the contents of ATLAS and COMMONS (iTunes, iPhoto, Documents, FCP training videos, ripped DVDs, the works)
2. My System Volume
++ the 250GB internal SATA
move COMMONS out
migrate system volume to this disk
better storage-to-free space ratio
3. My Scratch Disk
a) use the now-spare 160GB internal Maxtor (probably weak and slow)
b) get an external FW800 RAID disk from OWC
http://eshop.macsales.com/shop/firewire/hard-drives/EliteAL/StripedRAID
I'd go with the 160GB or 320GB
4. Backup Plan - level 1 - local
++ use my spare external Maxtor 250GB FW drive
clone the system volume regularly
++ get an external FW drive (like the 1TB My Book Premium II from WD)
clone ATLAS_BADASS regularly
the WD is just $400
i know it's capacity is lower than my super striped RAID, but i don't know of any cheap way to clone ATLAS_BADASS to a 1.5TB drive
5. Backup Plan - level 2 - remote
pay for a Mozy storage account which has unlimited capacity
upload system and ATLAS_BADASS every few weeks
any new thoughts? and thanks again!

I tried creating a startup backup via Disk Utility. There wasn't enough space and now I have no internal disk space. How do I fix this?

I used DIsk Utility to create a startup backup clone for the first time yesterday. I cloned it to my internal drive on my Mac. I let it run all night and when I woke up this morning it showed it as failed (not enough disk space). Now when I boot up my Mac, it showed a warning at the login screen (not enough disk space at startup). I do not have an external hard drive (which is why I chose to backup internally). Do I need to purchase one?
It still allows me to log in. When I open Finder and look at my internal drive, it shows less than 100.00 MB space available. I tried deleting a bunch of old files and stripped needless apps. However, it keeps showing my computer as having less than 100 MB of storage.
Is there a way to find the failed clone backup and delete it? I tried looking in Spotlight for the backup clone (I named it 4-21-14.dmg). I cannot find the file. I was hoping to backup my files so I can install OS Mavericks on my computer (mid-2010 Macbook Pro), but I do not have enough free space.

I solved the problem by deleting over 100 gb of files and apps. I would have rather not gone that route, but having less than 100 MB of storage is an unacceptable headache to deal with. Now I have to decide on whether to try again with the backup internally route or risk it and download/install Mavericks.

I am trying to update to OS X Mavericks but I cant seem to. Everytime I try to install it, I get an error saying I don't have enough disk space or FindReaperFiles closed unexpectedly. What do I do?

I am trying to update to OS X Mavericks but I cant seem to. Everytime I try to install it, I get an error saying I don't have enough disk space or FindReaperFiles closed unexpectedly. What do I do?

That isn't the problem. When I start the download of Mavericks I have more than enough space on the disk drive. However, once it has downloaded and it is attempting to install this error occurs:
Any ideas where I could re-download FindReaperFiles? From what I can see it's an Apple file but I can't find a download on their site at all.
Thanks!

"out of disk space" when trying to export

I'm working on a Macbook Pro and Final Cut Pro HD version 4.5. Here's the deal:
I'm trying to move a project into iDVD, so I'm exporting it as a Quicktime Movie. After about a minute of exporting, the "Error: out of disk space" window pops up. I have almost 3 gigs on my external drive which, I think, should be enough for the file.
On another post, someone with the same problem said it was a faulty timecode that made the project seem reeeaaallly long and the drive didn't have enough room for that long duration. I believe this might be the cause of my "error" because at the very beginning of my project the time code reads 01:00:00;00. If this IS the problem, how do I fix it? If not, what do I do?
I am a very amateur film editor and would very much appreciate any help!
Thanks.
Message was edited by: jraks

Two things:
1. That is not nearly enough of available space. At least 20 GBs is needed.
2. FCP 4.5 HD is a PPC app; you are running it on a Intel Mac. Not compatible and you will have issues. I'm surprised you were able to install it.

What does error message when trying to burn DVD from iDVD mean "not enough disk space to burn the remaining assets"

I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
"not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
I have read the help info on computer but hasnt proved helpful.
Any suggestions?

iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive. How much free space do you have?

Disk Space error message when trying to download an app!

I have 84GB spare capacity but App store keeps telling me I don't have enough disk space to download an app of 24GB!
I have emptied my trash and have checked the amount of free space on my HD and there seems to be plenty of space so why is it doing this?
Help!!!

If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
 ▹ System Preferences... ▹ Time Machine
If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Test.

Out of disk space when trying to download latest update to itunes

I bought a couple of new songs and I cannot even download them to my IPhone 5, because it says that my iTunes needs an update. I tried to dowload the update and it keeps telling me that I am out of disk space. Anyone have a solution to this?

Two things:
1. That is not nearly enough of available space. At least 20 GBs is needed.
2. FCP 4.5 HD is a PPC app; you are running it on a Intel Mac. Not compatible and you will have issues. I'm surprised you were able to install it.

When attempting to burn a 1.2GB video using Magic DVD I get Burning Prep error. Not enough free disk space...... I have tried all I know to no avail. This have just started!!

When attempting to burn a 1.2 GB video using iDVD I get a "Burning Preparation Error.. Not enough free disk space for encoding the remaing assetts" This has only justed started to happen. I have used this programme many times before in the past. Can any one help as I have tried all I know?

Yes, 44GB is sufficient. I don't think space is the problem. I don't know about iMovie but iDVD can only use the boot drive for its scratch disk.
You might be getting that error due to some damage file in the project.
Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
Also run Disk Utility and verify the disk. If errors are indicated you will need to boot iknto your system install disk and repair the disk with Disk Utility (see the Utilities menu in the first window after the language selection window).

I'm trying to install CS6 and I keep getting insufficient disk space.

I'm trying to install CS6 and I keep getting insufficient disk space
It tells me the C: drive doesn't have enough space but I'm trying to install it on the D: which has terabytes of space.

Please refer the discussion on the thread : http://forums.adobe.com/message/5225960#5225960

Has anyone received an error or "there is not enough disk space to complete that operation" when trying to export a photo? If so, how did you fix it?

Has anyone received an error message of "there is not enough disk space to complete this operation" when trying to export a photo from iphoto? If so, how did you resolve it?

How much free disk do you have? How many and what size of photos do yu have that you are trying to export?
LN

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.

Trying to Optimize disk space

Similar Messages

Maybe you are looking for