Trying to print an 8x10 but I'm being 'forced' to a 4x6

I'm on a MAC with PS CS5.  I have saved an image as a .jpg sized to 8x10.  This image has never been sized as a 4x6.  I try to print it using FILE > PRINT.  The print preview window has the dimensions above it indicating 4x6 and I get a warning that "some clipping will occur".  The 'Scaled Print Size' box shows:  100%, H:  7.998, W:  9.999.  When I check the "Scale to Fit Media" box the numbers change to 50%, H:  4, W:  5.  The preview of the image still shows the paper size will be 4x6.
I don't have a "Page Set-up" or "Show Details" button to click on.
Printer = HP Photosmart C7280 All-in-One.
What am I missing?
Thanks,
Bernie

can you post your screenshots please so we can assist you with some more detail, all screen shots from file to the final print dialog. The website for your printer suggests you select "simple Print". Then set the Paper size.
Follow these steps to print from the HP Photosmart Essential software:
Open HP Photosmart Essential, click View , and select the photos to print.
Click Print .
Select Simple Print .
Set the Paper Size to Borderless 215.9 x 279.4 mm (8.5x11 inch) .
Select the appropriate layout for the print job.
Click Print .
Have you set the paper size?
Also, have you updated your printer drivers recently?
-janelle

Similar Messages

  • Safari is trying to "print" and it won't let me force quit or force restart

    I tried to print something yesterday, but it keeps trying to reload the page and goes to the printer page which doesn't allow me to regularly "quit" the program.
    Here is what I've tried:
    -Opening Force Quite indirectly...does not allow because it thinks it's trying to print
    -Restarting the computer...does not allow for same reason as above
    -Force Quitting the computer (holding the power button)...it says the computer is already restarting because I tried above first.
    I can't open any other window in Safari either as the one with the print window takes precedence over the others.
    Thank you!

    Thank you Linc!
    Right before I got your response, I tried exiting out when the computer was offline, and it allowed me to take it off.
    Thanks again for your answer...have a good day!

  • Trying to print DVD-Cover, but Text is missing

    Hi,
    I'm trying to print a Cover I designed in Pages. It is printing everything fine except for the text that sits vertically (at 270°) on the spine of the cover. When I turn it to 0° it is being printed. Again at any other degree rate it is not showing on the print. I tried grouping all of it and putting it in the front but to no effect. Anybody has any idea what that is?
    best robert

    Sometimes the frames of certain text-elements are big enough to be shown on screen and in preview but do not print. adjust the size of the frame

  • Trying to print document freezes inDesign, then have to force quit program!

    I've been trying to print a document and it throws indesign into a freeze. The pinwheel spins and spins and then when I open "force quit" under Mac, inDesign shows as "unresponsive." Other tasks seem to work fine. Any ideas? Thanks!

    I've been printing to a Xerox Phaser 7500 (Snow Leopard) and it can be challenging. As  far as I can tell it likes you to take no shortcuts in the print menus. Meaning-- after clicking on Print, I am now always clicking Again on PRINTER at the bottom of the window, then making a selection under the XEROX menu, hitting print then print again. (Which model are you dealing with?)  [I 'm comfortable saying that the issue has nothing to do with the binary message which I'e been ignoring for eons]

  • Firefox not resonding.. your answer to this is so complicated ! help ! i hate to go elsewhere, but i'm being forced to :(

    it took me for ever to find what i'm looking for.. the problem is that i keep getting a " firefox is not responding " ! it happens all the time ! my computer has gotten so slow and with all these " not responding " .. if i can't fix it myself, i have to leave :( ... your answers that i found were so complicated for a mom that i'm being forced away from firefox and it truly upsets me.. please help ! i un-installed already and re-installed..

    Hello @sjancuski, 
    Welcome to the HP forums.
    I am sorry to hear that printing from an Android device to the Brother HL-2270DW is so complicated.
    I have found it easy to print from my phone to my HP printer.
    Perhaps if you post on Brothers forums you can get some assistance with the setup.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Trying to print from tiff but it is adding dither

    Hello,
    I am trying to create a Chuck Close style image for a Fine Arts class. I created the base image by resizing my image to 4 px sq and 12" by 12". The image looks great when saved, meaning the pixels are sharply defined from one another. However, when I go to print, a dithering of a sort is added to the image and one pixel fades into another. I need precise sizes because I am actually gluing smaller images to the base as pixels. I would use the mosaic function, but the sizing never turns out right. Any and all help would be greatly appreciated!
    Sorry, I cannot get the image to upload any larger.

    Use Image > Image Size to resample the 4 ppi image to a resolution that your printer requires, for example, 300 ppi. Use "Nearest Neighbour" resampling to maintain the squares. See before and after screenshots below.

  • Trying to print a book :-/ but need to convert to CMYK

    Using lightroom 5 to create a book. In a tutorial for lightroom I was instructed to use raw format when taking pictures but now that I am talking to printing companies, I am informed that I need to convert those images to CMYK. I did this in photoshop illustrator, but when I import back into book in Lightroom, they are reconverted to RGB. HELP, please!!!!

    Lightroom doesn't output CMYK.  You could create the book pages, export them as JPEGs and then convert the whole book pages to CMYK, if you're using a printing company who can't handle RGB files.

  • I'm trying to print from Iphoto but it says that there is no theme installed.  how do I fix this problem?

    I'm trying to priny  from IPhoto.  But it says that there is no theme installed.  How do I fix this? THanks!

    Check out OT's post in this thread:
    http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
    Also, note his comments here:
    http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
    > Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
    Regards
    TD

  • I'm trying to print a brochure but it is upside down on one side

    question above

    If your printer does duplex printing you may have a setting in the print diallog. Your best option for finding the answer is likely in the printer documentation, either a paper or online manual. My Brother color laser does duplex & I don't have to change anything.

  • Hello, I'm trying to print a picture but it say's that i have no themes installed. How can i install themes?

    It's seemed that i don't have any themes in Iphoto, how can i get them?
    Thank you.

    Check out OT's post in this thread:
    http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
    Also, note his comments here:
    http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
    > Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
    Regards
    TD

  • HP 4500 printing file name but not the context

    I have an hp 4500 connected to my router via an rj45 and have a laptop connected via wireless to my router. When I print a document from word it prints the file name and not the context.
    I have also tried to print an image but the same happen the file name got printed.  
    can any one help how i print the context on the file and not the name?
    is it due to my BT router?

    BT routers don't play well with HP printers, sorry.
    However, before we blame the BT, re-install the HP software from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Mail and textedit unexpectedly quit when trying to print anything.

    I'm trying to print an email but the stupid applications just quit with no dialog box afterwards. What gives?

    Try Reset Printing System, a menu choice in Printer Setup, then restart the Mac, then Add the printer again and try it.

  • System lockup when trying to print.

    I had this problem before, now it popped up again:
    When I try to print via airport express to an HP Deskjet 970cse the computer locks up. Total Crash - grey screen, you need to press restart...
    Not sure if it's application specific, I tried to print from Safari, but I did that a couple of times before and it worked fine.
    I had this with Panther, it disappeared after Tiger for a while and now it's back in full force. Anyone ideas about this one? Thx!

    There is a strong likelihood that your virus scanner software is causing you problems.
    There is no need for virus scanning software on a Mac.
    I suggest you uninstalling it using the uninstall procedure from the vendor who wrote and see if that helps clear up any of your problems.
    Allan

  • After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

    After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system
    If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting
    HP – Wireless Printing Center
    HP – Printer Not Found During Wireless Installation

  • I'm trying to print  an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape.  That is I change it in printer settings but no use.

    I'm trying to print an Ancestry document from an iPad 2 using air print.  The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format.  I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • How do I find out where a call was placed from?

     A friend borrowed one of our cell phones, and it appears the battery is dead or it was turned off. The last call listed under usage was to voicemail. is there any way i can find out the general area they were in when that call was made?

  • A Fatal Error Has Occured - Captivate 6

    Hi there, I have seen some threads on different error issues of Captivate, but mine is worse. Since the Captivate 4 installed in my office PC, it never ran smooth. Our IT purchased version 6 for PC with hope to improve performance. But since day one,

  • Polling using WCF SQL Adapter

    Hi - I have to develop this in BizTalk There is a table in SQL database where BizTalk needs to poll the data using WCF SQL Adapter. How and what query/stored proc do I need to write ? and how about polling interval should I mention. Is there any deta

  • How to organize work in OWB Design Centre to enable dimension sharing?

    Hi all, I'm looking for some guidance regarding the best way to go about organizing my work in OWB Design Centre to enable sharing of work already done and to avoid duplication. Currently I have one area: 1 Project 4 Source modules 1 Target module wi

  • Listings are not successfully sent to Rex 3.2

    Hi All, I'm facing some issues to send product listings from CRM to Rex 3.2. We configured the DCN a Product type download profile and we assigned it to Products by selecting Listings a download criteria. The Product profile has been assigned to a sp