Trying to print fonts that the printer doesn't know...

Hi,
Does anyone know what happens when you try to print a font that the printerdriver does not know?
I made an application for a client which printed ok at my company and behaves very strange with the client (some parts are not printed). The only difference I can find between this version and a previous version of the same application(that does work with the client) is that i have set a font before a Graphics.drawString() call.
What happened?

No an old copy of the printer was listed. I changed to the correct one and all is fine. Thanks.
I wouldn't have noticed the discrepancy without your help.

Similar Messages

HT1918 I'm trying to change my CC on iTunes and it gives me an error saying that the info doesn't match my banks info. But it's the same card I had on there before. Then took it off and now it won't take it again. Grrrr. Does anyone know what's up?

I'm trying to change my CC on iTunes and it gives me an error saying that the info doesn't match my banks info. But it's the same card I had on there before. Then took it off and now it won't take it again. Grrrr. Does anyone know what's up?

Click here and request assistance.
(91679)

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

I am having difficulty including text with iPhotos I want to share through email. I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area. This is so frustrating.

I am having difficulty including text with iPhotos I want to share through email. I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area. This is so frustrating. Before iLire11 I was easily able to share photos with email messages. Arghhhh!

In the iPhoto preferences you can set Apple Mail as your e-mail client and then it will work exactly as before
LN

I have a paid mobile me account, idisk was working but now am getting an error message saying that the account doesn't exist. Can I reset the account on idisk?

I have a paid mobile me account and did have idisk working. Now when I click on it I am being told that the account doesn't exist or is currently unavailable. Any ideas? Thanks

Solution: No. Idea: Yes. A lot of "funny" things are supposed to happen while Apple moves MobileMe accounts to the new data center which will run iCloud. Maybe that's related....

[svn:osmf:] 15220: Fix static initialization order in OSMFPlayer, so that the Log doesn't create TraceLoggers and DebugLoggers.

Revision: 15220
Revision: 15220
Author:   [email protected]
Date:     2010-04-05 10:29:52 -0700 (Mon, 05 Apr 2010)
Log Message:
Fix static initialization order in OSMFPlayer, so that the Log doesn't create TraceLoggers and DebugLoggers.
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/OSMFPlayer.as

shak wrote:
I've followed the first method with the mpd daemon and everything worked fine .
THanks for all your help everyone !
The add of MPD : ALL to hosts.allow seems to solved it .
Thanks again!
Nice.
Please mark threads as [SOLVED] when they are. You can do so by editing the opening post.

I am trying to import video and the audio doesn't upload with the video. Help.

I am trying to import video and the audio doesn't upload with the video. Help.
I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB). The video imports but not the audio, what do I do?

What are you capturing from? You may not hear the auido as it's captured but it will be there. After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip? If so then go to "View" then "Audio Playback" and set it to 'Built-in Output" if you're monitoring audio through the computer.

What I m trying to say is that ,my WIFI or also knowing as wireless connection that is no cable! OK ! So my Wi-Fi is not staying connected to my router ever time it goes to sleep and after it comes back its asking my to reconnect to Wi-Fi. NOT STAYING C

What I m trying to say is that ,my WIFI or also knowing as wireless connection that is no cable! OK ! So my Wi-Fi is not staying connected to my router ever time it goes to sleep and after it comes back its asking my to reconnect to Wi-Fi. NOT STAYING C

Why did you start a new thread. Just respond on the same thread you started.
Click the Reply button on a post that you wish to reply to.

How do you get a cd out of the imac g5 drive if the computer doesn't know it's in there. I've tried shutting it off and holding the mouse button, but nothing works because the computer can't eject what it isn't registering to be there in the first place.

I can't get access to the cd that is probably slid past where it is supposed to go. The computer doesn't note it is in there. This happened once before and I used another cd to tap it into place, and then I could eject the cd. It's a library music cd and nothing I've done to eject it, works. The dvd drive is empty to the computer, even though I've tried to trick it by getting it to burn a cd or dvd. It says insert disc. Hope someone knows how to pop it into place or open the thing up to get access to the drive. That cd is due!

power off your machine. hold down your left mouse button. power on your machine. This should eject the cd.
Eject cd
Here is a web page on twelve ways to eject the cd.
http://www.osxfaq.com/dailytips/01-2003/01-16.ws
You indicate you are running on a g5, but 10.6 doesn't run on on a G5.
On a PowerPC-based Macintosh (but not an Intel-based Macintosh), you may use Open Firmware to eject a CD or DVD disc when normal methods for ejecting it have not succeeded.
Immediately after the startup sound, press and hold the key combination Command-Option-o-f. Enter commands:
eject cd
mac-boot
http://docs.info.apple.com/article.html?artnum=106752

How to divide a 577 GB C local disk so that the HDD doesn't convert into dynamic?

The problem is, I know that Windows 7 won't allow more than 4 local disks on the same HDD, and in diskmgmt.msc there are already four partitions: SYSTEM (no letter), C local disk (windows installed), Recovery (D: ), and a FAT32 system HP_TOOLS (E: ), which is barely 4 gigs. Now, the C local disk is 577 GBs, which is annoying, so I'd like to have a partition where I can store my stuff, in case I need to reinstall/recover the windows (It's not mac, so over time windows gets buggy, crashy and sh**ty, you know). How do I create an additional local disk for me so that it doesn't convert Basic disk into Dynamic, and the recovery partitions are untouched?
Thanks in advance

Thank you for your reply. You helped me a lot! I'm creating a recovery media right now. I'm assuming that if I run it, say, after a year, it will reset the laptop to its factory settings?

I want to change the security answers but have noticed the email address is a hotmail one. I cannot remember the password and frankly it keeps telling me that the account doesn't exists. So how can I change that to my personnal email?

I want to change the security answers on my account but have noticed that the email address I listed is a hotmail one which I cannot get into. How do I change this as I only see an edit button for logging into iTunes but not one where I can change in the security answers. Thankyou

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94157)

I was just told by a Lenovo CS rep that the W520 doesn't support 6Gbps for "data integrity" reasons

The main HDD bay in my W520 drops from 6Gbps to 3Gbps shortly after boot. The speed drop is triggered when I start to pass data over the port. I can take the same drive (Vertex 3 240GB) and put it in the ultrabay and I get full 6Gbps speeds. It seems pretty obvious to me that this is a problem with the SATA controller on the laptop's motherboard (my specific laptop, not the whole run; other prople have the same drive with no issues), but after arguing with Lenovo support for over a week now, a customer satisfaction rep just sent me this email:
"I was able to confirm with are technical support that SSD transfer rate for the W520 ThinkPad is 3,0GB/s (chipset has the capability but we limit it for data integrity). So, your system is working as designed.
One bay for removable devices, Ultrabay Slim-compatible, 12.7mm high, bottom access
Some: Solid State Drive (SSD) / SATA 3.0Gb/s, 2.5" wide, 7mm high
Some: HDD / SATA 3.0Gb/s, 2.5" wide, 7mm or 9.5mm high, Active Protection System™
All: removable, upgradable, supports the second disk, Shock Mounted Hard Drive"
(w/ a link to this: http://www.lenovo.com/psref/pdf/tabook.pdf)
Obviously, these numbers refer to the speeds of the drives that Lenovo sells, not the speed that the port itself is capable of. Additionally, there are dozens of people that have confirmed that the main bay is capable of 6Gbps speeds. I also confirmed this with several sales reps before I purchased the laptop.
How should I handle this? He is going to have his tech support people call me back tomorow, but I seriously doubt they're going to be very helpful.

See also http://blogs.technet.com/b/keithcombs/archive/2011/03/28/lenovo-thinkpad-w520-mini-review.aspx which says:
<QUOTE>
[UPDATE for 4/6/2011] A little over a week ago I sent some questions into Lenovo around the drives and storage for the new Sandy Bridge based notebooks. Here are the questions and the answers I received.
1. Are the supported SATA interface speeds on the new ThinkPad's SATA III 6GB? Specifically, is this true for the T420, T420s, X220, X220t, T520, and W520?
[Lenovo] Yes, The new Huron River ThinkPads will support 6Gb/s, but our current drives that have been certified are only 3GB/s drives. The current roadmap is showing Late 3Q or early 4Q is when we'll qualify 6GB/s drives. This is true for the T420, T420s, X220, X220t, T520, and W520.
</QUOTE>

How can I remove activation screen if the person doesn't know the password or email ? but the phone is not stolen or anything, can apple unlock the activation screen?

I need help!.-. Because I purchased two phone for 400 and the owners don't know the password or emails but I checked the esn to see if it was clean and they both are clean . They aren't stolen or anything I need help !

You heard wrong.
Apple will not assist you.
You must get ahold of the original owner and have that person remove the phone(s) from their account. There is no way around Activation Lock.
~Lyssa

Hi,i just got a retina display iPad,I am trying to play hbo and connect with AirPlay with my Apple TV ,everything works perfect but I have a problem that the subtitles doesn't come up on the tv!!Can please anyone help with this problem. Thank you advanced

How can I make this problem work!?

Return it for a credit. Buying things like phones and computers on eBay is not a good idea. If the person refuses to refund your money, use the eBay appeal process since you were sold something that does not work.
Barry

I tried to upgrade BIOS and the laptop doesn't work anymore

Hi, I tried to install the update of the BIOS:
BIOS update for Satellite A100/A105, Satellite M110/M115, and Tecra A7
but unfortunatelly when it start to be installed, a blue window shous up, the laptop resets and never start again. I can turn on the laptop and enter to the BIOS, but unfortunatelly when the Hard Drive try to start to work, it doesn't do nothing, just show a completly black screen. I tried to install windows again from CD, but after press any key for start from CD, the screen goes black and no more happens, until I press the power on button for more than a couple of seconds.
My laptop is A105-S4004 and I has windows XP.
Please, if you have any solution please let me know. I really feel very comfortable with Toshiba Laptops since I study in the university but this fact give me a very bad experience with this.
BR
Jaime

It is iPhone and iPod only.
https://itunes.apple.com/us/app/haunted-hollow/id591098046?mt=8
Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, and iPad. Requires iOS 4.3 or later. This app is optimized for iPhone 5.

Trying to print fonts that the printer doesn't know...

Similar Messages

Maybe you are looking for