Trying to print on dvd with discus software?

i am using the discus software recommended by Old Toad here. i feel like i have the settings right - 80 mm, etc. but the disk missed the middle of the dvd completely and the whole picture is off center.
what am i doing wrong?
deb

As I mentioned in the other thread what are the settings in the print window? What paper size do you set and then what Preset is used. Although I an using a different printer I have to select A paper before the CD/DVD preset is available to be selected. There may be some association between the paper size selected and the photo missing the disk.
OT

Similar Messages

I am trying to install Lightroom 5 with a software download card. I get as far as entering the redemption code, receiving the serial number, then when I click download, nothing happens...

I am trying to install Lightroom 5 with a software download card. I get as far as entering the redemption code, receiving the serial number, then when I click download, nothing happens... Now what?

Adobe - Lightroom : For Windows
Adobe - Lightroom : For Macintosh
Mylenium

Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the

Hi, I am working with CS6 Design Standard for Mac, I bought from Adobe a DVD with the Software. I installed it already on my mac book. Soon I wanna buy a second computer for my work. When I bought the software I was told that it is possible to install the software on a second computer. But I also read lately that I will only be allowed to work with one computer. I want to work on both of my computers without de/installing and de/activating the software every time. Is this possible? Thank you!!

You should be able to install the products on two computers as long as they are not running at same. Also the platform should be MAC.
You may download the product from
Download CS6 products

I must re-install HDD, when tried to install application DVD with iPhoto,there was a error message, could not instal it again, I have LION 10.7.3. How can install application DVD again?

I must re-install HDD, but when tried to install application DVD with iPhoto,there was a error message, could not instal it again,
I have LION 10.7.3.
How can install application DVD again?
thanks
Dimitar

I've asked the hosts to move this post to Lion.
Here is a better place for you Lion posts.
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
What is HDD?
How to install most applications from DVD.
Place dvd in dvd drive.
Double click on dvd image if a folder didn't appear.
Double click on application icon in drive folder.
follow instructions.
Robert

Trying to make a DVD with an old/non-existent version of iDVD!

Ladies and Gentlemen,
Please could you help me?
I work at a school in the UK, and have recently been able to purchase an external Lacie DVD drive, as the school’s computer (currently an iBook G4 with OSX 10.3.2 and a 1GHZ Power PC Processor – 640 MB Memory and a 40 GB HD) wasn’t shipped with one – however, I have a problem…
Trying to make a DVD that will play in a stand-alone DVD player – I followed the advice in iMovie Help – but was stopped suddenly on finding that I do not have the relevant version of iDVD (which version (if any – I can’t see it anywhere!) was shipped with iMovie 4.0?). Is it possible to download a copy of iDVD 3 or later from anywhere compatible with OSX 10.3.2 and iMovie 4.0?
The iMovie Help has an additional option to ‘export your movie in a format appropriate for DVD authoring’ which has let me burn the movie as a (name).DV file – but this is not compatible with any DVD player I have tried. I noticed a while ago on this forum that someone was talking about Toast but I do not have this, but I do have Roxio Easy Media Creator 7, which was bundled with the burner – but is only compatible with a PC – would I be able to build a project in iMovie, transfer it to a PC, and use REMC7 to do what toast would?
Finally, I was wondering if anyone has any experience of using Avid’s free DV software – and if they would recommend it (and also if I would be able to make DVDs with it?).
Well thanks for reading if you got this far – and I’d appreciate it if you could offer any advice (I know I’ve not been very concise)…
Kevin.
iBook G4 Mac OS X (10.3.2)

Thanks for the welcome Karsten! I’ve checked the installer disks – which appear to have all the main pieces of software, but not iDVD. If you or anyone knows where it might be hidden that would be great. Thanks for all the other info too!
Thanks Lennart – I don’t think my computer could support iLife ’05 as it is running Mac OSX 10.3.2 and I’ve just been looking at its system requirements which state it requires 10.3.4 minimum – if you know differently, please let me know. As an alternative I have considered getting iLife ’04, but your comment about iLife ’05 being the first version to support external drives worried me (“iDVD 5 is the first iDVD version that officially supports external burners“ does this mean there is an unofficial option for iLife ‘04? Perhaps a patch similar to the one mentioned by Karsten), does that mean iLife ’04 would not support an external Lacie DVD writer?
What is the earliest version of Toast I’d be able to use (as a money saving option!)?
Thank you both, and apoligies for my amateurish questions…
Kevin.

Trying to create a dvd with video and slides...need help

I am trying to make a dvd that includes video from my sister's wedding but I would also like it to include slideshows that I have already created in iDVD. Her wedding video was taken in to a shop and put onto a DVD. I would like to take the video from that DVD and combine it with my slideshows so that everything is on one disc. Plus, the menus (or lack thereof) from the DVD the shop made are HORRIBLE. Can someone tell me how to do this?
Also, if you could explain how to insert chapters into the video once I have it into iDVD that would be appreciated. They did not include these on the DVD from the shop so it's one long movie with no way of skipping ahead short of fast forwarding.
Thank you very much for any input.
Michael

Hi, Michael,
I did for my daughter's wedding what you are trying to do for your sister's. You can do it this simple way:
I took her wedding DVD and copied some of it onto DV tape and imported that into iMovie where I edited it down to some clips I wanted to go with the still photos I already had.
To copy the DVD footage, I just put the disk into our DVD player, connected my camcorder and recorded it. Yes, there was a slight loss of quality, but not very detectable in the final product. After all, I am not a professional wedding videographer and some of the stills were from inexpensive snapshot cameras.
The final video still turned out well.
I actually did another longer one, this time using the original DV footage from the wedding videographer--he let us have it because he took so long to make the DVD! The DVD I made from that is of course better quality, but not that much better that I would go to more trouble to get it.

Error message when trying to copy a DVD with Roxio Toast v6.1.1

I'm trying to duplicate a DVD I made via Final Cut Pro and DVD Studio Pro by using Toast Titanium ver. 6.1.1.
About 3/4 of the way through the record process, I keep getting the following error message:
"Couldn't complete the last command because there was an I/O error.
Result code = -36"
Since I made this DVD myself, I don't believe there is any copy protection or region codes embedded.
The DVD has 2.72 GB of material on it.
Please advise, thanks.

Here are some things to try: Select the DVD in the Toast Copy window and choose Save as Disc Image from the File menu. When that is complete eject the DVD and insert your blank disc, choose the saved disc image with the Image File setting in the Copy window and burn your DVD.
Alternatively, drag the VIDEO_TS folder from the source DVD to your hard drive. Choose DVD-Rom (UDF) as the format in the Toast Data window. Click New Disc. Add your VIDEO_TS folder. Click New Folder and name it AUDIO_TS. Now burn your DVD.

Just tried to upgrade to SnowLeopard with new software. iLife failed to download and now the computer will not start up--grey screen with lines going round and round in a circle. What can I do to get it to start up?

Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

Trying to print says " problem with adobe acrobat/reader exit try again help?

I keep trying to print a document, which has been working up until today, it has to be in PDF format to print, but when I push print a box comes on the screen and it says "there is a problem with adobe acrobat/reader, please exit adobe acrobat/reader and try again. What do I do? Thank you

Hi tanjam38435898,
Please refer this thread Links as it seems relevant to your query : Re: Error Code 0:104
hope that helps
Regards,
Rahul

Keep getting an access denied window when trying to print to PDF with Adobe Acrobat X with any prgram/internet except for adobe programs

I am trying to print to PDF from Word, Revit, Firefox and all have given me a Access Denied window popup and would cancel the print. I have Adobe Acrobat X and Creative Design Suite 6.

So you are trying to print to the Adobe PDF printer? What is the full statement of the error (typically it indicates a folder or such does not allow access)? If you open Distiller, are there settings files available that you can view?
In the print menu, select print to file. Then open this file in Distiller. What happens with these two steps and do you get a PDF after the second step?

Error message trying to sync Bold 9700 with Desktop software 6.0

Hi all,
I received error message 0x80043ade when trying to sync my Bold 9700 with my Acer Aspire 6920, running Windows Vista and the latest Java 6.20.
Anybody out there had the same problem. The desktop software recognised my Blaxkberry and ran a data backup before I tried to run Intellisync.
Thanks,
David.

software version 5.01 uninstalled, synched OK, job sorted!

I am trying to burn a DVD with a 50 minute video. I repeatedly get the message that the content is too long. What have I done wrong??

I am trying to burn DVD with a 50 minute video. I repeatedly get the message that the content is to long. What am I doing wrong??

Is this using iDVD?
iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Problem printing on dvd with canon pixma ip 4200 printer

hello, i just bought a ip 4200. now here is the problem: the cd-printing just won´t work at all. the regular paperprinting does alright. has anyone similar experience or a solution to offer? i would be highly grateful,
saluti from germany
eddie wagner

Ive just purchased a Pixma 5000 primarily for its direct CD printing, and was understandably surprised when Canon informed me that the CD printing software shipping with the printer still hasnt been updated for Tiger.
Short of sending the printer back, I purchased Disclabel software from Smileonmymac. It works very well, and is significantly better than the bundled application, working in a very iApp sort of way. (This isnt an advert, by the way, I just though it might put some people out of their misery)

Tried to print from ipad4 with wifi printer. Saying can't find air printer. Printer on and it has printed previously.

Tried to print from my ipad 4 but saying can't find air printer. It has printed before.

Sharonanthony-
First, try double-clicking your Home button. A row of recent Apps will line up along the bottom of the screen. Scroll across and look for the Print Center icon. If it is there, you should be able to delete any print job that might be hanging it up.
If you can access the internet, then you should have a good connection to a printer that is using the same WiFi. If you do not have your normal connection to the internet, then I suggest you unplug your WiFi router for a few seconds. Then reset the iPad's network at Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred

Trying to print off email with Epson iprint

I am experiencing difficulty printing my emails with Epson iprint. It keeps showing that it cannot find my printer.
any help i would appreciate

I, too, have just heard from an end user about problems when printing a completed form with checkboxes. She uses Acrobat 8 standard. I originally created the forms in Acrobat 8 Pro (have upgraded to 9 and now at X on Windows XP).
What's troubling is she can see the form properly completed on screen, but then sometimes the "checked" checkboxes print but most of the time they do not.
I've seen references in different online sources to font issues too, possibly an old printer drive ... bottomline I need to provide an answer for her so any comments will be most appreciated.
Thank you.

Trying to print on dvd with discus software?

Similar Messages

Maybe you are looking for