Trying to print to video using in and out

I am trying to print to video (Mini DV) using in and out points. It works fine when I just play through the camera and record and it will print to video when I start at the beginning, but when I place in and out points and I have set the media to print "In to Out", but it just records the black leader then stops.

For exporting, IN and OUT points must be set in the +timeline of the sequence+ you want to export: make sure the timeline is selected, but NO clip in the timeline is selected before setting the points (use ****-cmd-A to deselect all clips).
If they are properly set you'll see an highlighted area in the timeline between the IN and the OUT points.
Piero

Similar Messages

  • How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

    how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

    Copied from this link.
    http://www.apple.com/iphone/specs.html
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

  • I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported.  What does this mean, and how do I get back all my photos and fix this? thanks.

    I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported.  What does this mean, and how do I get back all my photos and fix this? thanks.

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know some details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what fixes have you tried?
    where is you library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • I'm trying to print a pdf I created and posted on my website, it looks good online but is missing data when printed, help.

    I'm trying to print a poster I created and posted on my website, it was created in power point, saved as pdf, and uploaded using wordpress. It looks good online but is missing data when printed. It contains almost all the information except for about 6 lines, which happen to be important. Any thought are appreciated.

    No its weird, everything was the same. I sort of resolved it, since he can view the PDF fine on his comupter but also wanted to print it, I just exported all the slides as JPEGS and made a new InDesign book with those on the pages and exported that as a PDF. Seemed to work for him, I just don't know what happened!

  • Running Mavericks, when I try to print on my  HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. Worked fine with Mountain Lion.

    I'm running Mavericks and when I try to print on my networked HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. The same set up works fine's with Mountain Lion. I am uptodate. Any thoughts?

    Hi,
    Thanks, but these suggestions aren't helping.
    I have
    1. tried to print form a different add
    2. deleted and reinstaled the printer
    3. deleted and reinstall the printer drivers
    4. reset the printing system
    there's no problem with the printer or the wireless as (1) i can print using my partner's mac with mountian lion and (2) I can see the printer on my own mac (mavericks)
    Any more suggestions?
    Thanks
    Laurie

  • I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.

    I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.  Any suggestions?

    Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
    Remember - swipe up or down to get to the mode that you want to use.

  • I am trying to print a passport sized headshot and I get a full page photo. How to I print out a smaller size?

    I am trying to print a passport sized headshot and I get a full page photo isntead. I downloaded the shot from i photo and chose "small" but it didn't help.
    I also cropped the photo on iphoto to the dorrect size but no difference. I have a Canon MX 870 printer. Please advise.

    In iPhoto select the photo and print - select the paper size and a custom print size (2x2 i believe for passports) and print
    LN

  • My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

    my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

    christobell86 wrote:
    ... it will not restore my phone as i have got the app find my iphone switched on.
    You can access iCloud.com on a computer to turn it off.
    http://support.apple.com/kb/PH2702

  • HT1338 I'm trying to print a document fro safari and the print command is at the bottom of the page and not visible.  I can't move it up and the print command shortcut doesn't work.  How do I print this document.

    I'm trying to print a document from safari and the print command is at the bottom of the page and I can't move it up.  The print command shortcut doesn't work and I would like to know how I can print this document.

    Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

  • I tried to implement photo albums using iweb and got a publishing error.

    I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
    Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
    If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
    my iWeb version is 3.0.4 (601)

    Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work.  If they do try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If you're still not able to publish from iWeb to your server download and use the free  Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
    OT

  • Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW Why not?r

    Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
    Why not?

    Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
    Why not?

  • When recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

    when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

    when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?
    The basic answer is that Apple has not programmed the capture routine with this capability. As such, you can always send QT feedback requesting this feature be added as a future enhancement.

  • I'm trying to print envelopes by using Pages merge.  It continues to read it as a 8.5X11 sheet even though I have set the page size to 6.5X4.75

    I've merged names and addresses to be printed in Pages.  The page size is set to 6.5 x 4.75 but the printer keeps trying to print as if it is an 8.5 x 11 sheet. Any ideas where I'm missing a setting?  I've been merging things for 25 years and I've never had this problem.

    Hi fruhulda!
    Thank you so much!  I called the printer company and finally got the problem solved.  This printer must print with the long side oriented as the pass through.  The envelope I was using had been oriented to have the short side pass through.  It doesn't really seem logic that the printer cannot print the sizes entered but when I changed the orientation in Page Set Up it worked. 
    Had I check this would have certainly helped.
    Melmom

  • Print to video using a DSR45

    I am planning to lay off to tape on a DSR45 and need it to have timecode. I'm told the DSR45 does not do 'edit to tape' so plan to use 'print to video'
    Will the deck generate a timecode while it records or does it come from FCP?
    I want to ensure it has a timecode but not sure if there's any setting I may need to check.
    thanks for any help!

    I think you can get what you need from it. The time code settings seemed a little quirky the couple times I've used one. Sony publishes the manuals.
    http://www.sony.ca/dvcam/manuals.htm

  • Error trying to print report to both pdf and network printer

    Hi all,
    When trying to print a report to my network printer or to pdf I get the two errors attached, one right after the other.  The resulting pdf or hard copy has almost everything in it, except for three tables which are completely missing.  When I go back into the report and open the page with the missing table, the table is no longer visible in the report and I get the second error again.  Exiting and restarting diadem brings the tables back.
    I've found several threads about pdf and other print errors and tried the solutions there to no avail; specifically the one posted here.
    I hope there is a fix to this!  These reports are intended to sell management on diadem! Thanks!
    OS Info:
    Windows 7 64 bit SP1
    18GB RAM
    DIAdem Info:
    Version: 11.3.0f4563
    USI:       1.9.1f4681
    DataFinder:  3.0.0f4681
    Script Engine:
    5,5,0,5207
    Debugger: 6,0,0,8424
    CLAD
    Solved!
    Go to Solution.
    Attachments:
    diadem print error 6-7-12.png ‏17 KB
    diadem print error two .6-7-12.png ‏15 KB

    Hello testingHotAir,
    Just to make sure, do you have administrative privileges for this machine?
    Also, you have attempted these exact steps as posted by lerman?
    Make sure that you are logged in as Windows administrator.
    Click the Windows button and click Printers.
    Right-click the Diadem pdf Export and select Properties
    Click the Ports tab, then click the Add Port button.
    Note: If the Ports tab is greyed out, right-click the Diadem Pdf Export icon and select Run as admin.
    Select Local Port and click the New Port button.
    Enter PDF1 for the new port name and click OK. Close the Printer Ports window.
    Put a checkmark in the box next to the PDF1 port if it is not already checked.
    Click on the Advanced tab.
    Select the Spool print documents radio button to make the options below it clickable.
    Clear (uncheck) the box labeled Enable advanced printing features by clicking it.
    Select the Print directly to printer radio button to make the options below not clickable.
    Click the Apply button, then click OK.
    Important: In order for the changes to take effect, you must restart your computer.
    Reboot your computer and then try to print, email, or create a pdf from Diadem.
    Regards,
    Jeff L.
    Applications Engineer | National Instruments

Maybe you are looking for