Trying to put a busy Cursor but ...confused why its not showing up
Hi
I have a Application and within it there are few HBox, List, VBOX , Canvas ......blah.. But one Vbox(vbox1) has a List(list1)
From List on itemClick I have a requirement of opening up a tree node by doing a lazy loading of the tree
And during this processing happens I wanted to show a busy cursor to let the user know that on item click the application is trying to load a tree and then open a particular node
Did the folllowing
CursorManager.setBusyCursor();
and
CursorManager.removeBusyCursor();
Also
var cusrorId:Number = CursorManager.setCursor(StyleManager.getStyleDeclaration("CursorManager").getStyle("busyC ursor"),CursorManagerPriority.HIGH)
and
CursorManager.removeCursor(cursorId)
Also
list1.cursorManager.setBusyCursor();
vbox1.cursorManager.setBusyCursor();
and
list1.cursorManager.removeBusyCursor();
vbox1.cursorManager.removeBusyCursor();
But after all this I didn't see any Busy Cursor
Busy Cursor is shown for few minutes if I put a Timer in between i.e after the ItemClick and before I trigger the processing of lazy loading of the tree
Guys any guesses
How can I make it work ? M I doing something wrong ? Please help
Regards
Biswamit
Is it a 2nd gen or a 3rd gen? Only the 3rd gen requires for power to be plugged in, however all cables need to be disconnected initially regardless of model.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure you are connecting directly to computer, not a keyboard port or USB hub. Try a different cable.
Similar Messages
-
I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons
its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work
-
I have broken my iphone 5 and have an iphone 4. I have an adaptor to put the sim in but it says its not supported on this phone. What can I do?
They might have one at the Apple Store but a better chance is to go buy your cell providers store.
-
i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please
Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/ -
i have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!
Hi
You need to find the format of the drive by looking at its info, my guess would be you are currently in NTFS (windows only) mac can use any mac os journaled or non journaled, or you can use fat32 which is usable on both pc and mac but is unable to move files over 4GB so no good for large file transfers. You will need to re format at some point but this will delete everything currently on the drive.
Hope this helps -
istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me
Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT -
I keep putting in my passcode but my iPad won't show the numbers in the blocks and consequently it won't open for me. I have tried double tapping in the numbers and then it shows the numbers in the blocks correctly but then it responds with a wrong code in red and then locks me out.
Typing in the code takes a long time which might indicate a full HD.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.
Is it possible that the person who sent the message to your phone sent it to your phone # instead? Try sending a message to your phone via the email address and see if it shows up on the iPad.
-
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
Passbook is not working on my iPhone 4S. I tried changing the date to 2013, but it's still not working. Does anyone know how to fix this?
This link may be helpful.
http://support.apple.com/kb/ts2755 -
TS4062 i am trying to sync my ipad with my desktop itunes but the ipad is not showing as a device
I am trying to sync my ipad with my desktop itunes but the ipad is not showing up as a device on my itunes account.
Any suggestions?Downloading past purchases
http://support.apple.com/kb/HT2519
Recovering iTunes library from your device.
https://discussions.apple.com/docs/DOC-3991 -
I am trying to update my apps but it says its not vaild in Singapore. I am from Australia. How do I return it back to Australia setting?
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region -
I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.
Have you already confirmed that you trust the computer?
Launch iTunes, then connect your iPhone to the computer.
When prompted, confirm that you trust the computer.
Maybe you are looking for
-
HT4623 Is there any way to find a lost iPhone once the phone's battery has expired?
I have lost my iPhone(4)and the battery is dead. I have the "locate device application", however, I know the battery is dead. To my knowledge, once the battery has expired, it cannot be retrieved using the "lost device/find my device" application.??
-
Running a cycle count by period. Cycle count was established to start on 27-Aug-07. Created the Perform full cycle count (Report Set) which runs every month...however in September the auto schedule in the cycle count form has the next date as 24-Sep-
-
Macbook Pro Randomly Shuts Down and Restarts
Hi There, This issue appears to have occured for other people in different forms but there does not appear to have been a conclusive answer to the problem, so here's hoping someone here might be able to provide some further insight into the issue, an
-
Adobe Photoshop CC 2014 closes soon after opening in Windows 7
I recently purchased the Adobe CC which includes Photoshop and Lightroom. I am a student and need Photoshop for both my Design and my Photography courses. I installed the program today and each time I open Photoshop it closes within a few minutes. I
-
Can you close the account last had created TEST problem I faced in iOS 6 ?
I have a problem since update Alchgl system iOS 6 in FaceTime & iMessage .I had to create another account to try.I want to close now !