Trying to re-install Acrobat 8 and it's saying I need Internet Explorer 4.0 or greater installed. I have IE 11 installed so not sure what to do., Trying to re-install the full Acrobat 8 program and it's saying I need Internet Explorer 4.0 or greater insta

Trying to re-install Acrobat 8 and it's saying I need Internet Explorer 4.0 or greater installed. I have IE 11 installed so not sure why I'm getting that message.

Acrobat 8 needs IE 6.0 not 4.0
1) Try installing using MSI file instead of setup.exe.
2) Enable MSI logging and provide the MSI log. Steps to enable MSI logging can be found here http://support.microsoft.com/en-us/kb/223300
3) What is the version of shdocvw.dll in "C:\Windows\System32" folder and in "C:\Windows\SysWOW64" (exists only on a 64 bit machine) folder.

Similar Messages

  • HT1212 My daughter changed her passcode and can't remember it.  We had not done a back-up in a while so I'm not sure what to do.  Should I restore the factory settings?

    My daughter changed her passcode and can't remember it.  We had not done a back-up in a while so I'm not sure what to do.  Should I restore the factory settings?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT201109 Why am I getting this message when I am signed in with the account that I purchased it I don't have another account I'm not sure what's going on here's the message I keep getting my:"To update this application sign into the account you used to pu

    I am trying to update my Final Cut Pro X which I have done many times before.
    Why am I getting this message now?
    --- here's the message I keep getting every time I  try to download the update--
    "To update this application sign into the account you used to purchase it"
    I am signed in with the account that I purchased it I don't have another account I'm not sure what's going on

    Open up iTunes. Go to Store. Go to Account and sign in. Click on Purchase History. Find your purchase record.
    Good luck
    Russ

  • HT1414 My daughter has an ipod touch 1/2nd generation not sure but it's older, and we can't open it because it says "IPod is disabled connect to iTunes" but it won't connect to my Imac either not sure what I should do?

    I've rebooting it several times and it still says it's locked. Not sure what I should do she's young so I don't want really want to have to buy her a new one. Thank you for your help.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps..

  • My I Phone is a 4 s, and I came with 5 mb of I cloud storage, my phone won't back up because I needed more storage or delete data. What data am I supposed to deleted? I have dumped everything off my phone, so I'm not sure what it is trying to back up.

    I have an i phone 4s, It comes with 5 mb of free i cloud back up. It has not been able to back up, due to not enough storage, it saying I need to delete data, what data? I have dumped everything so I am confused.. I buckled an bought 10 more mb and it is backing up right now for like another 23 hours...what exactly is it backing up since I dumped all pics,and texts messages? How can I prevent this in the future? oh I only have like 2 mb of music onn there as well..and it was saying I still had 5 mb avaliable to use on the cloud last night..I'm so confused...

    Is it saying that there is not enough free space to backup to your computer?  If so, make sure you have enough available hard drive space to back up your iPhone.  If you do, a backup file on your computer is corrupted.  The best way to resolve this problem is:
    NOTE: This method will erase any and all backups iTunes has made of your iPhone from your computer. It should not erase the data on your iPhone, just the backup files that iTunes creates on your computer.
    Launch iTunes, Go to iTunes>Preferences, then click on the Devices tab, select all of the backups made of your iPhone.  Then click "Delete Backup...".

  • I am really tired of trying to fix this problem and not sure what to do tryed to flollow directions and it doesn't work !!

    same thing as yesterday proxy server is refusing connections , read how to fix but did not help!!

    same thing as yesterday proxy server is refusing connections , read how to fix but did not help!!

  • My iPad2 suddenly has battery draining very quickly. Started using Evernote and installed new OS. Not sure what is wrong

    Installed OS 6. Started using Evernote. All of a sudden last two days battery is listed as 69% after 5 hours. In the past it has lasted 2 or 3 days. Not sure what has happend.  Could it be the new OS?  Maybe a setting in iPad or in Evernote?

    Installed OS 6. Started using Evernote. All of a sudden last two days battery is listed as 69% after 5 hours. In the past it has lasted 2 or 3 days. Not sure what has happend.  Could it be the new OS?  Maybe a setting in iPad or in Evernote?

  • I have reloaded the latest version of Adobe Flash Player and it still crashes. I am not sure what else to do.

    I have the latest version of Firefox as well as Adobe Flash Player but the Adobe continues to crash. I even removed the plug-in and re-installed it and the plug-in will not work with any program. When I use a different computer Adobe Flash Player works so I am not sure what else I can do to fix the problem.

    Clear your cache Tools > Options > Advanced > Network > clear now
    Right-click on video > Settings > turn off Hardware Acceleration

  • Ok I got my computer worked on so I had to reinstall itunes now everything is gone on my itunes and it won't let me sync my ipod not sure what to do

    Ok I got my computer worked on to remove viruses so I had to reinstal itunes now everythings gone from my itunes tried to sync my ipod it won't sync my music ,apps, or pictures back to itunes it says an ipod should only be synced with one itunes library and im supposed to have only one it gives me a choice to erase  and sync or tranfer purchases so I click tranfer purchases so I get a error message itunes was unable to load class information from sync services Reconnect or try later I am not sure what to do.

    - Transfer iTunes purchases to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - For other music you need a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - After all the stuff is on your computer, connect the iPod to yur computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up.
    - Restore the iPod from that backup.

  • I have the student creative cloud bundle. Not sure what is going on.

    In the creative cloud app I cannot download any apps. It says start trial or buy. Not sure what to do.

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I down

    Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here.  The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

    Hi Jeff,
    Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
    Sincerely yours.
    Peter

  • Got the following message when trying to install Photoshop CC "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." I use Windows Vista so not sure what I need to

    Hi there
    I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
    I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.

    Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
    System requirements | Photoshop

  • We puchased elements & photoshop 13 and we are having trouble with some parts of it.  Can we uninstall & re-install?  Was not sure what the agreement allows?

    just purchased elements & photoshop 13.  We are having problems with certain parts of it.  Are we allowed to uninstall and reinstall. Was not sure what the agreement allowed. help!!

    Yes, feel free to uninstall and reinstall as many times as you feel necessary. However, this doesn't often fix problem (unless the install process didn't work in the first place or that files have become damaged or are missing since the install process).

  • My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    So, you can't Install OSX to the external?
    Or you can't boot from it when you do?
    You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story.

  • XML Bursting program was messed up the report format and output, not sure what is causing an issue

    Hi All,
    I need burst the report based on the customer number for some customers and burst based on invoice number for some customers in the same bursting program. I have made the changes accordingly and sending email attachments as expected, but when the output sent for as an attachment for each invoice the report does not printing in full format, its completely ignore one child block. Not sure what was the issue. This is very very urgent please help me out.
    Following is my bursting code:
    <?xml version="1.0" encoding="UTF-8"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
       <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">     
          <xapi:delivery>
             <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
            <xapi:message id="123" to="${EXCLUDED_BILL_TO_EMAIL}" attachment="true"
               subject="Confirmation for your Invoice(s)">
    Dear Customer,
    Thank you for placing an order with XX cust.
    Please review the attached invoice(s).
    Regards,
    Customer Service
            </xapi:message>
             </xapi:email>
          </xapi:delivery>     
          <xapi:document output="XX_INVOICE_EMAIL_${CUST_NO}" output-type="pdf" delivery="123">
             <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_EMAIL!='N']"/>
          </xapi:document>  
       </xapi:request>
       <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">     
          <xapi:delivery>
             <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
            <xapi:message id="123" to="${EXCLUDED_BILL_TO_FAX}" attachment="true"
               subject="Confirmation for your Invoice(s)">
    Dear Customer,
    Thank you for placing an order with XX cust.
    Please review the invoice(s).
    Regards,
    Customer Service          
            </xapi:message>
             </xapi:email>
          </xapi:delivery>     
          <xapi:document output="XX_INVOICE_FAX_${CUST_NO}" output-type="pdf" delivery="123">
             <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_FAX!='N']"/>      
          </xapi:document>  
       </xapi:request> 
       <!-- START Sending email for each invoice in CR2197-->
       <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">     
          <xapi:delivery>
             <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
            <xapi:message id="123" to="${BILL_TO_EMAIL}" attachment="true"
               subject="Confirmation for your Invoice ${INVOICE_NO}">
    Dear Customer,
    Thank you for placing an order with XX cust.
    Please review the attached invoice.
    Regards,
    Customer Service
            </xapi:message>
             </xapi:email>
          </xapi:delivery>     
          <xapi:document output="XX_INVOICE_EMAIL_${INVOICE_NO}" output-type="pdf" delivery="123">
             <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_EMAIL!='N']"/>
          </xapi:document>  
       </xapi:request>
       <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">     
          <xapi:delivery>
             <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
            <xapi:message id="123" to="${BILL_TO_FAX}" attachment="true"
               subject="Confirmation for your Invoice ${INVOICE_NO}">
    Dear Customer,
    Thank you for placing an order with XX cust.
    Please review the invoice.
    Regards,
    Customer Service          
            </xapi:message>
             </xapi:email>
          </xapi:delivery>     
          <xapi:document output="XX_INVOICE_FAX_${INVOICE_NO}" output-type="pdf" delivery="123">
             <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_FAX!='N']"/>      
          </xapi:document>  
       </xapi:request>  
       <!-- END Sending email for each invoice in CR2197-->
       <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">     
          <xapi:delivery>
               <xapi:filesystem output="${OUT_DIR}/INV_${SALES_ORDER}_${ORG_ID}_${INVOICE_NO}_${REQUEST_ID}_${INVOICE_DATE}.pdf">
               </xapi:filesystem>
          </xapi:delivery>     
          <xapi:document output-type="pdf">
             <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".////XXARINVOICE[P_ATTACH='Y']"/>    
          </xapi:document>  
       </xapi:request>  
    </xapi:requestset>
    Thanks in Advance,
    Jagadish

    Initialize this:
                        String pet = "":>
    error is H:\JAVA\PetAdvice.java:88: variable pet might not have been initialized
                        return pet;Geez, the error tells you the source file and the line # at which the problem occurred, in addition to a lucid description. Why couldn't you figure it out for yourself?
    %

Maybe you are looking for

  • Problem with application toolbar

    Hi all I am facing a problem with the alv application toolbar. i have attached a custom  gui status to the alv but i am not able to see all the buttons created by me. some buttons are getting cut and i cannot see the buttons after scrolling as well P

  • Creative and Everyone I just fix DTS Nero PC in Creative Audio Control Panel :D?

    http://img37.imageshack.us/i/dtsneropcisfix.jpg/ Click on direct link coments are welcome

  • Reports for consignment

    Hi All, Is there any report where I can check check Vendor/Customer consignment stock at plant level?

  • Div Tag

    Hello, What is the diffrence between Insert Div Tag, Insert Fluid Grid Layout Div Tag and Draw AP Div? How to use all these three? Where to use all these three? What will be the effect in the design with these three?

  • Table record of the words in Vocabulary

    Hi Experts, For the words in the vocabulary I can see from which table field the word is coming. But it will not tell which particular record (primary key of the record) of the table the word belongs. Is there any way to find it? Like suppose we have