Trying to re ord with a live mic but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

Trying to record with an external mic, but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

MartyJames777 wrote:
Trying to record with an external mic, but having trouble getting a good record or playback volume.
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

I AM TRYING TO DOWNLOAD A FRESH COPY OF CS6 BUT HAVING TROUBLE WITH MY SERIAL NUMBER

I AM TRYING TO DOWNLOAD A FRESH COPY OF CS6 BUT HAVING TROUBLE WITH MY SERIAL NUMBER?

Hi Rob,
Please share few more details about the issue you facing.
Which Operating system you have?
Which product are you using?
What exact error message/code you get?
Thanks,
Ratandeep Arora

Trying to setup my Linksys WRT54G Wireless Router but having trouble.

Right, i will keep this nice and simple. I have had broadband internet for the past 10 days and yesterday i got myself a Linksys WRT54G Wireless router so both myself and my partner can connect our Macbook Pros up to the wireless internet.
But the problem is we cannot seem to connect onto the wireless network. It shows up when searching for internet connecting even when its is open without a password or with a password it does not want to connect?!?!
I can plug my laptop directly (as i am doing now) into the broadband modem and it works so i have no idea what is wrong? This afternoon we tried using a Windows Laptop and had the same problem. The wireless network shows up but when you enter the password that was entered on the 192.168.1.1 website it does not reconise it?!?!
If you can reply speaking English and not too much computer language that would be fantastic.
Many thanks

Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps.

Recording live drum track, having trouble getting my input source in stereo

I have my drums mic'd up, and am going through my Mackie DFX-12, out through my headphones jack, and into my audio input. The problem is that even though i have the drums panned out on the mixer, they are all centered on Garageband.
I'm pretty sure that it's a problem with my input source that I'm using on garageband, but i can't seem to figure it out.
From my mixer I have a 1/4-1/8 clip that going to a 1/8 chord that goes into my audio input. Also, both the chord and clip are stereo.
PLEASE HELP ME!

No, my plugs are def. stereo. I even bought new ones just to double check, and returned later that day when i realized that it was the same.
And the Mackie doesn't have a USB input, or output.
I was thinking maybe i could record two channels at the same time, and have one left and one right, but i'm not sure how to go about doing that.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help!

I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??

Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)?

I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone?

I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone? I don't really need a paper weight.

No not jailbroken. After the update which took about 45 minutes. The phone went black. Dead. Wouldn't restart. Using the new itunes I tried to restore it. It went through the motions; the white Apple and progress bar appeared on the iphone screen. Then I got a message "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes." Then the phone went completly dead again. I Repeated the process and got the same results. Is there another way to restore the phone if it's dead, besides itunes?

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan

I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers.

I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers. Anyone have any ideas? Thanks.

From a Catherine to Katherine -- Had the exact same problem!! I had to enable Java twice - both in Safari and then on the MacBookAir itself.

I'm unable to download the German dictionary. I tried to do it with a 3g connection, but I failed because of that. Now I have a wi-fi connection, but I still can't download it. Could you give me advice please?

I'm unable to download the German dictionary. I tried to do it with a 3g connection, but I failed because of that. A message said that I had to have a wi-fi connection to contine the download. Now I have a wi-fi connection, but I still can't download it. Could you give me advice please?

I did activate the German keyboard, and I entered in the application "notes",in which I typed a german word with the german keyboard... But I can't get "define". It only appears to me when I select a word from an ebook, but when I ask for the definition of a German word there, it simply says "no definition found", as if the German dictionary didn't exist. I know that it exists... When I tried for the first time to get a definition for a German word, it appeared a writing which asked me if I wanted to download the German dictionary. I selected "yes", but I was connected to a 3g connection at the moment, so the ipad didn't download the dictionary, but another writing told me that the download would have continued when I was connected to a wi-fi. It didn't. And now I don't know how to continue the download. I've installed the French dictionary and the English one, but for the German one that's what happened. Maybe the ipads work differently in each country?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

I have an iPhone and just goy I pad but no computer I'm trying to synch them together but having trouble with iCloud and I can't seem to subscribe for iTunes match from either devise

I have an iPhone and just goy I pad but no computer I'm trying to synch them together but having trouble with iCloud and I can't seem to subscribe for iTunes match from either devise

You first have to subscribe to iTunes Match through iTunes on your computer and have your music library in iTunes uploaded/matched before you can enable it on your iOS devices (see http://www.apple.com/itunes/itunes-match/). Without a computer you won't be able to use iTunes Match.

Trying to re ord with a live mic but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

Similar Messages

Maybe you are looking for