Trying to rebuild ZCM 10.3.1 server after crash

Hi all,
I'm currently trying to help a customer rebuild a ZCM 10.3.1 server (single primary server) used for Asset Management only, after a complete crash.
The situation is, that we have now re-installed both the OS and ZCM 10.3.1 server with same names, IP etc. We have also restored the SQL database and are able to login to ZCC and see all data.
But - the server is permanently running at 100% CPU Utilization, with the ZEN-loader and ZEN-Server as the primary culprit.
Looking in the loader-messages logfile, we found that it is being flooded with thousands and thousands og line with the same message:
[MESSAGELOGGER.Debug] [9/23/11 1:08:52 PM] [] [Loader.InventoryStorerAMModule] [] [InventoryStorerModule: Exception: com.novell.zenworks.datamodel.exceptions.ObjectNot FoundException: 13e17b91e0b14c7074846efd50f2d034] [] []
And we have now realized that this is due to the fact, that our new install of ZCM 10.3.1 and Agent, naturally does not have the same GUID as the original server..
So - the question is then: how do we change the GUID on the new installed ZCM server, so that it will hook up to the original server/device in the database, and just move on as nothing has happened? I believe I have seen a ZMAN command at some point, doing this exact thing?
Additional information about the installation:
Server running on VMWare platform
Windows Server 2008 R2 Standard
Microsoft SQL Server 2005 Express (on same server)
ZCM server 10.3.1 used for Asset Management only (250 devices)
Cheers,
Henrik Holm Nielsen

hhn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?

    I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?
    Facts:
    In moving to a new iMac, I copied the iPhoto library to an external HDD assuming that I would point the new iMac to the backed up iPhoto Library
    All worked fine when I pointed the new library but noticed that some folders contained aliases and not the original file. So when I attempt to open that photo it can't find it because the alias is pointing to another drive.
    I do have all original photos from a couple of external HDDs. In the folders titled, "Originals" (from older versions of iPhoto) and "Masters" (from current iPhoto)
    I'm thinking I can create a new folder and drop the original files and make that my new iPhoto library. Is there a better way to rebuild my library? I do not want to create any future aliases.
    Thanks in advance for any help!

    do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
    It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
    Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
    It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
    You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it  --  and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
    LN

  • Trying to rebuild my iphoto library from time machine backup and it still says 0 restored with a grey screen and the circle. How can i restore my library?

    I just bought a new Macbook pro and i tried to rebuild my iphoto library from a time machine backup on an external hard drive. Even after pressing command+option when starting iphoto and selecting rebuild library from automatic backup, it still doesn't work with the grey screen with the white circle and a little window that says 'rebuilding library: 0 versions restored'. I also tried to make a copy of my iphoto library but that did not work either. how can i restore my iphoto library or at least gain access to my photos?

    Your question is not clear
    Rerairing or rebuilding the iPhoto library never involves using Time Machine in any way
    TM is a totally seperate program and you can "restore" a file (including the iPhoto library) from the past using TM - you launch TM and go back to the time you want and select the file (or folder or package) you want and click restore - it probably is best to keep the current one until you are sure everything is good
    LN

  • Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1.  iPhoto says I must upgrade but upgrade eventually hangs.  Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

    Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1.  iPhoto says I must upgrade but upgrade eventually hangs.  Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

    What version was the old library made with?
    What is the exact message? when it hangs does it crash or do you have to force quit?
    LN

  • Error (2912) An internal error has occurred trying to contact the SCVMM01.dom.local server: NO_PARAM: NO_PARAM.

    
    Error (2912)
    An internal error has occurred trying to contact the SCVMM01.dom.local server: NO_PARAM: NO_PARAM.
    WinRM: URL: [http://SCVMM01:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={A210B91B-3239-4347-B251-83E1555356A2}]
    Unknown error (0x80072f0d)
    Recommended Action
    Check that WS-Management service is installed and running on server SCVMM01.dom.local. For more information use the command "winrm helpmsg hresult". If SCVMM01.dom.localis a host/library/update server or a PXE server role then ensure that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
    When we want to create a template of a virtual machine, we receive the following error. The environment has the following components and servers:
    * Windows Server 2012 R2 U1 with Hyper-V role enabled
    * High available Virtual Machine Manager 2012 R2 RU2 (two virtual servers on Hyper-V 2012 R2)
    * High available Virtual Machine Manager 2012 R2 Library servers (two virtual servers on Hyper-V 2012 R2)
    There're a few things I've already checked:
    * Self-signed certificates in the Trusted People store --> OK
    * Windows Firewall turn off --> OK
    * Re-added a Hyper-V host to the SCVMM environment
    * Reboot the VMM servers and the library servers
    * Export port usage and conflicts with netstat -a -b --> OK, no conflicts
    * Free disk space on the VMM library servers --> OK
    The job is starts fine, but step 1.2 "Store virtual machine W2012R2TMPL from HV01 to CLSCVMMLIB01" Failed. So it looks like the sysprep fase is going well. When VMM is trying to store the virtual machine in the library, it fails.
    Who is familar with this issue and can help me find a solution for this?
    Thanks in advance!!
    Mark

    Have you installed AppController on the same machine with VMM?

  • I am trying to install Oracle 9i on Windows Server 2008

    Hi
    I am trying to install Oracle 9i on Windows Server 2008.
    While installing third CD it shows the following error message
    "jrew.exe has stopped working"
    Please guide me what to do next as early as possible.
    Thanks

    Why?
    The general policy of Oracle is very simple:
    it certifies against the current version of the OS.
    It never re-certifies against new releases of the OS.
    Windows 2008 didn't exist when Oracle 9i was released.
    Sybrand Bakker
    Senior Oracle DBA

  • Why is Mail trying to connect to an unknown mail server (and how do I stop it)?

    Hi - I'm worried that someone has hacked into my system so that it tries to connect to a fake mail server (perhaps to send spam)? I usually have the activity window open when Mail is running, and noticed that it was trying to connect to an unfamiliar mail server the other day - it was shown as an IP address whereas all the mail servers in my mail accounts have names rather than IP addresses ... so I copied the IP address down and searched for it (196.201.4.6), to find that it is run by malawi.net ... in Africa. I recently upgraded to Mac OS Lion, so initially I had figured that it was showing the mail server address differently, but I couldn't think of any reason that my email servers would be in Malawi!
    By now I was getting worried: I checked all my mail accounts to be sure that something had not changed, and confirmed that none of my accounts used this mail server (or mentioned the IP address); and confirmed that the "Connecting to server "196.201.4.6"" activity message only appeared when I first reconnected to the internet (i.e. now when I manually clicked on "get mail") ... which suggests to me that it is a hidden process somewhere?
    I don't have a virus checker, but downloaded ClamXav and ran a check on my user folders ... but found nothing.
    Any thoughts on what this might be, or - if it is something malicious or externally controlled - how I can remove it?
    Thanks - andy

    Hi - "display remote images in HTML messages" was already deselected, so I don't think it was an HTML message connecting.
    But your response made me wonder about whether it was something else in an old email that was causing the problem - I had a search and found some emails from back in 2006 (when I did some work in Malawi for CARE) that were from the mail server (mailer.malawi.net = 196.201.4.6) that has been appearing. However, I still don't understand why (six years later) Mail is now trying to connect to this server ... I'm pretty sure that it never used to happen (and I have been a full-time Mac user since 2003), as I always have the activity window open and would have noticed, so it is only since I upgraded to Lion last week that it started. Any thoughts? I could delete/archive the old emails, but I would really like to understand what is happening?
    Thanks - andy

  • My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

    my computer has some serious problems, my iphoto only shows  only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

    Details please
    What version of iPhoto and of the OS?
    i tried to rebuild my files from folders that had the pics in them.
    Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
    my iphoto only shows  only shows thumb size pics when I try to open them,
    where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
    originally all the photos had a large delta with a question mark.
    Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
    also I can't back up the library file because its not there.
    This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
    By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
    I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
    Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here  --  http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US   --     and   --    http://pondini.org/TM/FAQ.html   ---
    I also lost my Idvd file, only have broken chain showing.
    This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
    LN

  • Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

    I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
    It verifies the connection and then throws the error:
    The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
    WSUS Server : Windows Server 2012 R2
    Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
    Please let me know if anyone has experienced this issue.

    We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
    It verifies the connection and then throws the error:
    The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
    Same error even after rebooting the server multiple times.
    WSUS Server : Windows Server Standard2012 R2
    Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
    Event ID 7000:
    The Windows Internal Database service failed to start due to the following error:
    The service did not start due to a logon failure.
    Event ID 7041
    The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
    Logon failure: the user has not been granted the requested logon type at this computer.
    Service: MSSQL$MICROSOFT##WID
    Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
    This service account does not have the required user right "Log on as a service."
    User Action
    Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
    right is assigned to the Cluster service account on all nodes in the cluster.
    If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
    with this node might be removing the right.
    I found following article:
    "MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
    http://support.microsoft.com/kb/2832204/en-us
    To work around the issue, use one of the following methods:
    Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
    Exclude the computer from the GPO that defines the user right.
    We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
    Regards
    PR

  • TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

  • WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

    I'm having issues installing starting the WDS server service on Win 2008 R2,  this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
    'An error occurred trying to start the Windows Deployment Services Server.'
    Error Information: 0x0906
    EventID : 257 
    single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
    any ideas what might be the issue?  I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far... 
    With WDS tracing enabled I get the following error information:
    [4304] 09:22:11: ===>Starting logging of module [WDSServer]
    [4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
    [4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
    [4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
    [4304] 09:22:11: [RPC] Host Name: sccm.domain.local
    [4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
    [4304] 09:22:11: [RPC] Initialized
    [3756] 09:22:11: [RPC] Server Started.
    [4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
    [4304] 09:22:11: [BINLSVC] Provider Initialized.
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
    [4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS] Deleted.
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [Udp] Listen Shutdown.
    [3756] 09:22:11: [RPC] Server terminated (rc=0)
    [4304] 09:22:11: [RPC] Listen Stopped.
    [4304] 09:22:11: [BINLSVC] Shutting down
    [4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
    [4304] 09:22:11: [BINLSVC] Deleted.

    It seems I've found out the solution myself,  the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
    get it working again is:
    1.      
    Install WDS Role (using defaults)
    2.      
    Make the following registry change:
    HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts  =  0
    3.      
    Run the following command line to initialize Windows Deployment Services:
    wdsutil /initialize-server /reminst:D:\RemoteInstall
    4.      
    Run the following command to enable the DHCP port registry setting
    wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

  • Fetching but never finishing while trying to rebuild

    have tried to tried to rebuild my mailbox (mailbox was getting populated with multiple duplicate emails), but now, as I run "activity" it's fetching my mail--some 14000 messages, but it's getting hung up around half way through.
    and then just starting over.
    consequently, there are now NO emails in my inbox. help! how do I make sure the emails I'm trying to recover aren;t lost?
    and why the incessant loop of fetching, never finishing, and then repeating the cycle?
    mail-less in Dallas

    Audrey:
    Welcome to the Apple Discussions. You can useiPhoto Library Manager to easily open both of the two libraries on your HD to see if there is duplication or if there are some photos that are not in your primary (located in the Pictures folder) library. If there are some you need to get into the primary library the paid version of iPLM will let you copy rolls or albums between the two libraries and maintain the keywords and comments as shown here.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Ora 12154 error when trying to add a database to VS Server Explorer

    Hi Everyone,
    I get the Ora 12154 error when trying to add a database to VS Server Explorer.
    How do I get around this problem.
    The database service is running and I can connect to the database with pl/sql.
    I can also tnsping the database and that is also ok.
    Looks like a problem with the odp.net software.
    I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
    I am new to this stuff so please help me step by step.
    Thanks.
    Emad

    Hi J. B.
    I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
    Anyway here is the VB coding I used. I'm new to this and still learning:
    Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
    Public Class Form1
    ' String to connect to the database.
    Dim strConnectionString As String = _
    "Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
    ' Associate the connection string with a connection object.
    Dim objOracleConnection As New OracleConnection(strConnectionString)
    ' SQL query for returning data rows.
    Dim strSqlQuery As String = _
    "Select dname, deptno " & _
    "From dept " & _
    "Where deptno = 10" '
    ' Command object to make this query work.
    Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    ' Identify what type of command is being used.
    objOracleCommand.CommandType = CommandType.Text
    Try
    objOracleConnection.Open()
    ' Set up a Data Reader and load it with data.
    Dim objOracleDataReader As OracleDataReader = _
    objOracleCommand.ExecuteReader()
    objOracleDataReader.Read()
    ' Convert the department number to a string.
    lblDepartmentNumberFromOracle.Text = _
    CStr(objOracleDataReader.Item("deptno"))
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    End Try
    End Sub
    End Class
    I still want to thank you for the help you are providing.
    Truly,
    Emad

  • Photos lost from iphoto after trying to rebuild library

    I tried to rebuild iphoto library because when I clicked on a picture, I got a grey triangle with an exclamation mark.  But it didn't rebuild, instead, I lost all pics, and managed to recover about 1/5 from the time capsule backups.  I don't know where the rest of them went, how can I recover these pics?  PLEASE HELP!!!

    https://discussions.apple.com/docs/DOC-1689

  • Im trying to rebuild my iphoto library

    I have a Macbook Pro 15" mid 2009 running Yosemite.  My hard drive crashed.  Yosemite could not recognize my back up so I'm trying to rebuild my iphoto library from my old drive through a reader.  iPhoto will not allow me to drag the old library from the hard drive to the pictures folder.  I get and error -43.  Iphoto is 9.6 version which I believe is up to date.  I tried to update with the iphoto 9.1 update.  I got the message "Iphoto update can't be installed on this disk.  iPhoto 9.0 or later is required to install this update."  I'm lost - Please help

    several things
    what exactly does this mean?
    I'm trying to rebuild my iphoto library from my old drive through a reader.
    iPhoto will not allow me to drag the old library from the hard drive to the pictures folder.
    iPhoto is not involved with dragging any file or folder - that is a finder function
    I tried to update with the iphoto 9.1 update.  I got the message "Iphoto update can't be installed on this disk.
    Since iPhoto 9.6 is a later version of course you can not update it using a previous version
    What is on the old drive? A TimeMachine backup? A copy of the old library? The original library? How is it connected to the MBP?
    Re error -43 - that may be a permissions issue - read this thread -  error code -43
    LN

Maybe you are looking for

  • Why cant i disable mail service ?

    Mail service got enabled when I enabled some other services (don't know which one) i checked a couple and it got enabled, i tried to disable it then but it wouldn't let me, back then i didn't pay much attention to it so of course it's not configured.

  • Nw04 to nw04s

    Hi, got a couple of questions regarding nw04 to nw04s currently we are on ep 6.0 sp14 and interested to use the features of NW04s. 1. is it an upgrade or migration from nw04 to nw04s? i hope it is an upgrade, am i right? 2. is it mandatory to upgrade

  • WIP Picklist Print Flag ??

    Hi, I have been tasked to flag when a WIP Picklist for a job/item (Unallocated) has been printed, for a custom report. So my question is "*Does Oracle flag such a thing, anywhere in the DataBase?*" when a report like the "Discrete Job PickList Report

  • Mail service will not start

    First time configuring Moutain lion server and while i wanted to change my host name from a .private to a .com (for access and sending email via Internet) my mail.maisondesnoyers.com is not responding. The old host name was macpro.private Checked my

  • Whenever i lose signal, a message appears that cannot be dismissed.

    an image of the alert is attached. the message cannot be dismissed. I am unable to use my phone at this point. i am forced to restart. it then works fine.