Trying to record message from my voicemail

I have a mic hooked up to a "inspire 1394" which is hooked up to my computer via firewire. I'm able to hold my phone up to the mic and record onto garageband but its not that clear.
Does anyone know of a better way to do this?
Or is there way to minipulate what I've recorded. I'm new at garageband.
Thanks
Gerry

i've have used cordless panasonic and siemens phones that have the mini headjack outlet (it is smaller than 3.5mm). I just spliced a mini cable to an RCA or 1/4" and bingo, instand line level phone tap.
if your talking about a cell phone, then you can do the same thing by modifying a handsfree set.

Similar Messages

I am trying to record a from my Macbook Air and an annoying loud sound, like a burp, will suddenly erupt from the MacBook, necessitating I start again. Any ideas on how I may stop this, or what it is??

I am trying to record a meditation from my Macbook Air and an annoying loud sound, like a burp, will suddenly erupt from the MacBook, necessitating I start again. Any ideas on how I may stop this, or what it is??

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Error while trying to pick message from weblogic queue

Hi,
We are getting the following error while trying to connect to pick up a message from weblogic queue.
We are suing oracle soa suite 10.1.3.1 and weblogic 8.1
the bad part is that, this error is not documented anywhere and couldn't get much help on this.
Would appreciate any suggestions / pointers on this.
Let me know if any further information is required.
invoke failed
org.collaxa.thirdparty.apache.wsif.WSIFException: file:/E:/product/10.1.3.1/OracleAS_4/bpel/domains/default/tmp/.bpel_OTOCBPELProcess_1.0_78fcf080ec2bd7495aebfb5373e76116.tmp/readmsg.wsdl [ Consume_Message_ptt::Consume_Message(opaque) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
---------------------------------------------------

Hi!
I am facing a similar issue, does someone have an idea ?
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="detail"><detail>null</detail>
</part><part name="summary"><summary>file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TestReceiveMessage_BPEL_1.0_e00fd88d454889b871183d0d92dc9f7d.tmp/plReceiveMessage.wsdl [ Consume_Message_ptt::Consume_Message(TestPushMessage_BPELProcessRequest) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
Please examine the log file to determine the problem.
</summary>
</part></remoteFault>
Thanks,
romain.

Facing error when trying to read message from MQ through B2B

Hi,
I'm trying to read the messages from MQ through B2B.
I have created a listening channel in B2B console.
Also place the required jar files in the Domain_Dir/lib folder.For your reference the jar files are given below,
a. com.ibm.mqjms.jar
b. dhbcore.jar
c. com.ibm.mq.jar
d. com.ibm.mq.jmqi.jar
e. mqcontext.jar
g. com.ibm.mq.commonservices.jar
h. com.ibm.mq.headers.jar
i. com.ibm.mq.pcf.jar
But i'm encounter the below error while reading the MQ. Pls let me know if i'm missing something.
####<Oct 9, 2014 4:00:03 PM IST> <Error> <oracle.soa.b2b.engine> <ULCAKESBTD1P> <b2b-server> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850603388> <BEA-000000> <oracle.tip.b2b.transport.TransportException: [JMS_CONN_INVALID] JMS connection error.
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:93)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:199)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: oracle.tip.b2b.transport.TransportException: [JMS_CONN_FAC_NOT_FOUND] JMS_CONN_FAC_NOT_FOUND
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:78)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:208)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
... 7 more
Caused by: java.lang.ClassNotFoundException: QMUL.PDT
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:190)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:162)
... 10 more
oracle.tip.b2b.transport.TransportException: [JMS_CONN_INVALID] JMS connection error.
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:93)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:199)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: oracle.tip.b2b.transport.TransportException: [JMS_CONN_FAC_NOT_FOUND] JMS_CONN_FAC_NOT_FOUND
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:78)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:208)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: java.lang.ClassNotFoundException: QMUL.PDT
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:190)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:162)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
####<Oct 9, 2014 4:00:20 PM IST> <Warning> <oracle.adfinternal.view.faces.partition.FeatureUtils> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850620868> <ADF_FACES-30130> <Ignoring feature-dependency on feature "AdfDvtCommon". No such feature exists.>
####<Oct 9, 2014 4:00:21 PM IST> <Warning> <org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850621197> <BEA-000000> <Configurator services already initialized.>
####<Oct 9, 2014 4:00:30 PM IST> <Notice> <Log Management> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1412850630361> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
####<Oct 9, 2014 4:00:30 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850630614> <BEA-000365> <Server state changed to ADMIN>
####<Oct 9, 2014 4:00:30 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850630698> <BEA-000365> <Server state changed to RESUMING>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631051> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:214:4fff:feeb:478d:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631051> <BEA-002613> <Channel "Default[1]" is now listening on 10.236.77.12:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631052> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:214:4fff:feeb:478c:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631053> <BEA-002613> <Channel "Default[4]" is now listening on 127.0.0.1:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631053> <BEA-002613> <Channel "Default" is now listening on 192.168.107.97:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631054> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631055> <BEA-000332> <Started WebLogic Managed Server "b2b-server" for domain "b2b-domain" running in Development Mode>
####<Oct 9, 2014 4:00:32 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850632557> <BEA-000365> <Server state changed to RUNNING>
####<Oct 9, 2014 4:00:32 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850632559> <BEA-000360> <Server started in RUNNING mode>
####<Oct 9, 2014 4:00:38 PM IST> <Warning> <oracle.soa.services.notification> <ULCAKESBTD1P> <b2b-server> <TimerFactory> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850638612> <BEA-000000> <<.> Notification via email, voice, SMS or IM will not be sent. If you would like to enable them, please configure corresponding sdpmessaging driver. Then modify the accounts and set NotificationMode attribute to either NONE, EMAIL or ALL in workflow-notification-config.xml>
####<Oct 9, 2014 4:02:41 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029c4> <1412850761335> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,963 during the configured idle timeout of 5 secs>
####<Oct 9, 2014 4:02:51 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029d2> <1412850771337> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,970 during the configured idle timeout of 5 secs>
####<Oct 9, 2014 4:03:16 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029f4> <1412850796335> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,984 during the configured idle timeout of 5 secs>
Thanks,
Ravindra.

Hi Ravindra,
Which mode of connectivity are you trying (credential based / .bindings based)
MQ connectivity support is provided via JMS offering of Oracle B2B. This blog post will provide you the steps for the same - https://blogs.oracle.com/oracleb2bgurus/entry/b2b_communication_using_ibm_mq
Please ensure to provide the proper values for connection factory and other details in JMS configuration in B2B
HTH

Recorded message from Verizon

Hi folks,
I received a recorded message the instructed me to go to vzw290.com, or something like that to redeem something. I wasn't given the option to re-listen to the message, and I wasn't prepared to write anything down. I went to my account, and I don't see anything that leads me to believe I have a refund coming or anything like that. Have any of you experienced this? Could it be some kind of scam or something?
Thanks,
Barry

It's not from Verizon, it's a scam. There are numerous threads about it here.

I have been trying to send messages from my Non Apple friends/family from my I Pad. How do I get this to work??

I have been trying to send my Non Apple friends/family messages from my I Pad. How do I get this to work??

It won't. iMessage isn't an SMS service. It's for Apple-to-Apple and uses cellular data. SMS uses a cellular SMS plan, which does not come with your iPad. You'd have to have a cell phone to send texts like that. Alternatively, you can find an instant messaging app like Skype (they do messaging, not just video chat) or MSN Messenger that goes across platforms. You install it, they install it, you can chat with them.

I'm trying to move messages from Mozilla to Thunderbird as Mozilla is no longer compatible with 10.7

I don't know how to move my messages from Mozilla to Thunderbird.

Mozilla what? as there is Mozilla Firefox, Mozilla Thunderbird and the ancient Mozilla 1.7.x suite along with other Mozilla products and projects.
If you are referring to the Mozilla suite then perhaps look at SeaMonkey which is a community effort in keeping the suite going. http://www.seamonkey-project.org/

Can anyone tell me how to I get an old account information and recorded messages from a conversation

I am totaly confused by eircom and efibre.......last year I was in arrears with eircom to the tune of( as I thought) of €357.66and I was disconnected but in the long run I got a huge bill in my door of €656.48 , when I had to the money to pay the original amount, I was put through to efibre who told me that remaining amount of €298.77 shouldnt have been on my account and they would take it off I was also given a new account and phone number. I have now got several bills from my old account plus a letter from a company called BCW (debt collectors) who are treathening to take legal proceeding against me...... can anyone tell me how do I get my old account information and that conversation I had that day??

Thanks Tracey,I got a letter from the debt collectors BCW on Thursday to say if I didn't respond to that letter within 5 days they were going to take legal proceeding against me. 10 minutes from receiving the letter I got a call from BCW to say that eircom had been in touch with them to say the issue has been resolved and that I don't owe the money,I am now waiting on a letter from BCW to tell me same so as I have it in writing. So hopefully that is the end of the issue, Many thanks Confused 1

Rejected record message from Essbase Studio load (3355)

I receive the following error when deploying an outline via Essbase Studio to an ASO cube (ver 11.1.2):
\\Record #36798 - Member XXX does not exist. Reference member column types require the field to be an existing member (3355)
As I read the error (BTW, can someone help me find the table of rejected record codes?), it is rejecting the assignment of an attribute to a member because the member does not exist.
What could be a reason though that I did not receive an "Error adding member XXX" rejection beforehand or something indicating that there was an error adding the member originally? I am puzzled because I cannot find anything special about the source data when comparing to the many others that loaded successfullly.

Hi All,
Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
So mostly we are facing this issue has been verified as unpublished Bug 12967639.
As documented in KM:
Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
Also towards ASO there is another document having all there as:
Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
Thanks,
Shaker

Receive activity pending when trying to consume message from Queue

Hi ,
I'm using a BPEL process to publish and subscribe message into a queue using JMS adapter.The messages in Queue are produced and consumed properly . But the BPEL process is still running, with a receive activity used to consume that queue, in pending state. The schema used throughout the BPEL and JMS adapter are the same.
Edited by: user13829970 on May 8, 2012 2:07 AM

Make sure you use the same schema and same queue name while configuring the Producer JMS Adapter and also the Consumer JMS Adapter
And in the JMS Consumer Composite, define the interface of the BPEL based on the WSDL of the JMS Adapter (service) and then wire the BPEL and the JMS Adapter. Make sure under the receive activity, the create instance checkbox is checked.
Hope this helps
N

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically I am trying to access messages that were in my deleted folder at the time I last saved, that have since been cleared.

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically, I am trying to access messages from my now deceased father that were in my deleted voicemail folder at the time I last saved, that have since been cleared.

The iCloud backup includes visual voicemail messages. I'm not sure if it includes the deleted ones or not, but I would assume it does.

HT3529 I'm trying to send messages to other people (who have iPhones, iPods etc.) from my iMac and as I hit the send button it always says "Messages couldn't send message to.." what do I do?

I'm trying to send messages from my imac to other people who have apple devices and it always says "Messages couldn't send message to..." how can I send messages now?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

RFC connection error in recording eCATT from Solman

Hello,
I am trying to record eCATT from Solution Manager into our DEV box. I have set-up the RFC connection and tested them.
When trying to recording I got the following message:
"RFC error ThControl: illegal sap_dext call !!!/ connection"
Any suggestion?
Thank you.

Hi
Did you ever find any solution for this, as I am receiving same error even though seems that all settings are in place?
Thanks!

Recorded messages when an 0844 message rings me

We keep getting recorded messages from 0844 numbers, they start by saying that 'This is an important message' but you can't speak to anyone, if I hang up the message keeps going and I can't ring out for some minutes until it finishes.
We are registered with the TPS service which can't stop these calls, I've tried Googling the numbers and it comes up with the UPS Parcel Tracking site which says that it's not one of their parcels. Another Google suggestion was that it was a BT number! Yet another solution was a firm called Credit Style Solutions.
When my husband spoke to BT earlier on they said that it was a credit rating agency and they couldn't do anything about it.
These calls are getting quite distressing, we have no wish to ring the number back as we don't know just what we would be getting ourselves into, and anyway they seem to use different numbers, also 0844 numbers are expensive to call, if it is a debt collection agency surely they would want to speak to us rather than use a recorded message.
Has anyone any suggestions for stopping these unwanted calls with incurring charges.
Mellie.
Solved!
Go to Solution.

Mellie wrote:
We keep getting recorded messages from 0844 numbers, they start by saying that 'This is an important message' but you can't speak to anyone, if I hang up the message keeps going and I can't ring out for some minutes until it finishes.
We are registered with the TPS service which can't stop these calls, I've tried Googling the numbers and it comes up with the UPS Parcel Tracking site which says that it's not one of their parcels. Another Google suggestion was that it was a BT number! Yet another solution was a firm called Credit Style Solutions.
When my husband spoke to BT earlier on they said that it was a credit rating agency and they couldn't do anything about it.
These calls are getting quite distressing, we have no wish to ring the number back as we don't know just what we would be getting ourselves into, and anyway they seem to use different numbers, also 0844 numbers are expensive to call, if it is a debt collection agency surely they would want to speak to us rather than use a recorded message.
Has anyone any suggestions for stopping these unwanted calls with incurring charges.
Mellie.
Hi. Welcome to the forums.
If I may be frank here based on your last paragraph - harrasment by the telephone may be a criminal offence which you could report to the police. The problem being the different calling numbers as you've said.
The people ringing may well have the wrong number, however calling numbers on the TPS from the UK is against the law unless you have an "active" ongoing business with the caller.
Do any of these calls say "PPI", or payment protection etc ?
Keep a note of the exact time and day these calls are received, as well as the telephine number. And also the message relayed each time.
0844 calls aren't actually that expensive to ring, however I suggest you don't of course.
Informing the TPS is also a route to take.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Trying to record Stereo Mix with a monitor through my headphones. Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio. I have all that figured out. I'm able to efficiently record my audio and screenplay through these instruments and programs. What I am having trouble with is the stereo mix. I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone. I want there to be no external sound except me talking into my microphone. I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone. Can't figure this out
-Downloaded soundflower, have the output as soundflower. Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
-I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps. That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record. Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel) Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it. I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5 2.4 GHz Intel Core i7 4GB 13333 MGz DDR3 (If any of this is imporant)

Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Trying to record message from my voicemail

Similar Messages

Maybe you are looking for