Trying to record Stereo Mix with a monitor through my headphones.  Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio.  I have all that figured out.  I'm able to efficiently record my audio and screenplay through these instruments and programs.  What I am having trouble with is the stereo mix.  I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone.  I want there to be no external sound except me talking into my microphone.  I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone.  Can't figure this out
     -Downloaded soundflower, have the output as soundflower.  Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
     -I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't      figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps.  That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record.  Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel)  Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it.  I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5  2.4 GHz Intel Core i7 4GB 13333 MGz DDR3  (If any of this is imporant)

Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Similar Messages

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Audio and video not synchronized in recording made with Lync 2013

    There appears to be no forum for the Lync 2013 client yet, so I am posting this in the Lync 2013 server forum.
    Environment: Lync 2013 Server and Lync 2013 32-bit client. Only one Lync pool. Conference call was scheduled using "Lync Meeting" in Outlook about a week before the call. Call recorded on a laptop that was plugged into our LAN with an Ethernet
    cable.
    Problem: User scheduled a conference call with screen sharing (PowerPoint) and recorded the call. The audio and video are not synchronized in the recording. There is several minutes' delay, with the audio lagging behind the PowerPoint. The last slide
    on the call was presented, the call ended, and the presenter ended the recording (I was present for all this and can confirm no user error in these steps); however, in the recording, the slides change before the speaker talks about it, and the last
    couple of minutes are cut off. 
    Any ideas on why this happened? Web research has failed me. Thank you.

    You may need to lower the recording quality as your PC might not be able to keep up the pace.
    Go to Options in Lync client -> Recording -> Select 480p
    Then test again
    - Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

  • I'm trying to record audio and video simultaneously using iMovie and an external mic and the computer is picking up the audio but when I replay the video there is no sound. Any ideas?

    Can't get iMovie to record audio and video at the same time using the built in cam and an external mic.

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • HT1267 i have purchase an iphone but no audio and video are available with it .can i record video and audio by this device

    i have purchase an iphone. but no audio and video are available with it .can i record video and audio by this device
    <Personal Information Edited by Host>

    Hello JessCastle,
    Start with the article below to troubleshoot issues with the microphone on your iPhone. If none of it works then contact Apple Support to further help you out. 
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/en-us/HT203792
    Take it easy,
    -Norm G. 

  • Does the mini displayport able to transfer audio and video to an external monitor (example: a tv) using a 2011 13" MacBook Pro with an hdmi cable?

    I was wondering this, because I want to hook up my 2011 MacBook Pro to a external monitor (TV) using an hdmi cable.  This would be heplful before I buy a mini displayport to hdmi adapter, and then maybe find out that the mini displayport might not transfer audio, only video.

    Yes, min Displayport supports audio and video for the 2011 MBP 13" via HDMI.

  • Recording Level Low in Garage Band, Avid mBox mini, NT2

    HI there,
    I have setup a home studio. I have a MacBook Pro connected to Avid Mbox Mini Soundcard, two speakers and a Rode NT2 condenser mic.
    For some reason, the voice or acoustic recording level is very low...I can still record but the sound level is very low and if I increase the input volume then there is a terrible echo...I am sure there is something wrong.
    These are the solutions I have already tried:
    - System preferences, I put the input as Avid Mini...and activate +48 button to power the mic.
    - Garage band, I move track volume to track pan, Monitor ON, 24bits...and the Recording Level is gray-out since I am using an external sound card (I assumed because of what I read).
    Any idea on how I can solve this issue, I am sure there is something wrong, the mic and soundcard can record this bad.
    Thanks in advance. Mariano

    Hi, thanks very much for your reply gjmnz...I finally went to Virgin like 7 times...during the same day...to figure out what was the issue...and here is what I have learnt:
    - The memory of the computer is very sensitive to recording, that is why I read some blogs saying that the mic is unstable, some times is picking up and sometimes is not...for instance I was using Torrents at the same time so the pick up was horrible...over time. Because the torrent and internet connection was eating my memory, event though I have 8gb
    - The other thing I learnt and I agree with you (thank you) is that you shouldnt be paying much attention to the leds levels in GB...that will miss you, you have to test and try different gain levels.
    - The last thing and what solved my problem, was to buy an analog mixer console for the mic to enhance the picking...And now it is working properly to the point that now it makes senses to use the lower of the Dbs...the NT2a has -4 or -8 for ambient noise cancelling...
    Conclusion, for me at least...if you bought a Avid Mbox mini and you have a Rode Condenser mic (NT2a or NT1000, I tried both) the only way to enhance the capturing of the mic is to get a mixer console...
    This is the one I bought http://www.mackie.com/products/402vlz3/ (it is ok...but works for home recording).
    Hope this helps the rest...I read that the low volume issue is being around since 2007...and I saw a lot of question unanswered...
    Best, Mariano

  • Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

    I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through.  Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center.  Neither of these programs are able to start, from startup or even manually.  They just won't run.  Sound seems to come out fine still, but I do have video issues. 
    First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port.  I still get an image, but it's set to current screen resolution instead of 1080i.  I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens.  Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen.  I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires.  When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer.  So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
    I did try updating the software with what's available through the support site, but nothing happened.  I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software.  Giving the audio and video a complete clean slate to work from, and got no positive results.  I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv.  Problems as described above still apply.
    Anybody else have this issue?  Anybody got a fix?

    have you found a solution to this?
    My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
    I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
    *edit*
    this worked for me i stumbled across this
    I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. 

  • Recording separate audio and video to iMovie?

    I have been experimenting with recording video directly to iMovie with my DV camera instead of using a tape (saves time, as I'd have to import it anyway). I was wondering if there is any way I could record audio from a different source (I have a digidesign MBox) at the same time. This way, I'd have better audio quality and not have to worry about syncing it later. If this isn't possible in iMovie, is there a program that it is possible in (preferably not an expensive program)? Maybe Quicktime Pro can do this?
    Thanks.

    I like Bengt's suggestions. You could try experimenting by opening a second program and record the audio using both iMovie and the microphone input. Since you can mute the camcorder audio in iMovie after syncing, the last challenge is the sync. Seems like a clapboard would work.
    Otherwise, look into a video converter box or something where you can mix the audio and video externally, and have it come into iMovie over Firewire at the same time.
    Or, check over in the Final Cut forum to see about those capabilities.
    Portable hard disk recorders for pros could have separate video/audio inputs.
    Bengt's plugin mic is sounding pretty good about now.
    John

  • Problem with merging incmoing audio and video source

    I am trying to record incoming audio and video data but i ran into a weird problem. The datasources merged fine but during playback of the recorded file the video sometimes turns white while audio still goes. For example, if the audio duration is 10 mins , the file length will be 10 mins but the video shows only like 2 mins and then the rest of file is white with sound in background. i am not sure why its happening... i also tried merging the files after recording audio and video individually but still no\ luck. does anyone know why this is happening? thanks

    I am working on Audio/video conferancing . Before sending Audio/Video data from my side
    to other side I am setting SendStream's setSourceDescription with my own name for CNAME . On reciving side some time i am getting correct CNAME which i set to SourceDescription ,but some time it gives default CNAME which is username@computername in steed of giving CNAME set to my name .
    Can you help me to solve this problem
    Thanks & Regards
    Amol Chandurkar

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    # Question
    I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
    I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
    You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
    Did you try my suggestion of installing portable ESR ?
    For forum cross referencing purposes
    * Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
    *(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
    * Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
    *I note this was first seen in Fx21 and is 100% Windows 7
    <br />

  • Record webcam audio and video

    hi
    there is a way to record the stream of webcam without use media server or similars servers?
    as3 with flash or air can do that? record both audio and video?
    i found a air class that record video capturing bitmap data of each frame and saves to a byte array but no record audio
    can i save only the micriphones audio in mp3 without a server?
    thankk
    gustav

    You can use the Flash Media Live Encoder to both stream Live video or as a simple recorder, by unselecting "Stream to FMS" and checking "Save to Disk"
    It's free, works well... get it here:
    http://www.adobe.com/products/flashmediaserver/flashmediaencoder/
    There is also a section here in the Adobe Forums dedicated to the software if you need more info.
    Best wishes,
    Adninjastrator

  • How do I synchronise audio and video with an mpg file created in elements 11 ?

    How do I synchronise audio and video with an mpg file created in Premier Elements 11 ?
    The source files are VOB files, and there is no problem with those source files.  But after creating the mpg file, the audio can be out of sync by 1 second or even 10 seconds, and sometimes zero seconds (ie perfectly OK).  That varies.  The variation might be linked to some of the VOB files.  ie. some are OK, and some are not.
    Can I fix this automatically in Elements 11, or am I doing something wrong ?

    Hartwood,
    First, Premiere (both Pro and Elements) do not handle MPEG Audio perfectly - they like some files, but not all files with MPEG Audio. That makes a VOB a less-than-perfect source file. Still, with a bit of work, one should be able to edit it just fine. One of the factors is that there is a very slight block-size difference between the Encoded Video Stream and the Encode Audio Stream in a muxed MPEG-2 file. That often does not play into things, but can cause slight OOS (Out of Sync) issues. Also, both Premieres need to create all I-Frame files for the Video Stream, which is in GOP (Group of Pictures) structure, so what one sees on the Timeline is really a proxy of the MPEG-2 file's Video Stream. The Audio Stream must also be Conformed to PCM/WAV @ 48KHz 32-bit floating point, to be edited. That Conforming is perfect when one has PCM/WAV @ 48KHz 16-bit for the Audio Stream, but requires more work, when the Audio Stream is MPEG (one reason that some MP3's do not work well in Premiere). Several factors involved here, and a fair amount of work for the program. That is why DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio works so perfectly.
    Now, fixing OOS might be easy, or might require a bit more work. This article goes into some workflows, that might be helpful: http://forums.adobe.com/thread/436751?tstart=0
    I can feel your pain, as I almost went crazy trying to fix OOS in a client's Project. They ONLY had the finished DVD, from which to work. The disc met the DVD-standards, so everything ripped/Imported fine, and when the simple edits were done (IIRC, there were four scenes, that had to be shortened, and then several Titles added), everything played fine in the Timeline. However, when I Transcoded that Timeline to be authored in Adobe Encore, two scenes went OOS. I went back to Premiere, and checked - all perfect there. I tried to judge the number of Frames that the Audio was out, in those scenes, and nudged them, tested, nudged, tested, and no matter what I did, I could never get the output files perfect, when Imported into Encore for authoring to DVD-Video. I tried DV-AVI, and letting Encore set the Transcoding automatically (usually a great way to work), I tried manually setting the Transcoding in Encore. I tried outputting to MPEG-2 from Premiere, and Importing that. No matter what I did, those two scenes were just OOS, and I could not even seem to improve them - it was like they were just locked OOS. I finally did some more editing, to break things up a bit, added a cut-away shot here, and there, and minimized the perceived OOS, but could never get it perfect. It was like trying to pick up quicksilver with a pair of tweezers!
    Good luck,
    Hunt

  • IChatAV not doing audio and video with Jabber

    I am using a Macbook and have configured iChat to talk to MSN via Jabber using Psi and a server in UK called tuff.org.uk. The buddies show up and I can text chat with them but the buttons for audio and video are greyed out. I have usually use a wireless router with NAT and have played with port forwarding. As an exercise I have tried connecting to the internet via my mobile phone (no NAT) and the results are the same. I am not using the firewall on the Mac.
    There are no hardware problems I am aware of, the built-in iSight camera works within iChat etc.
    Any help would be appreciated.

    Hi Jan,
    Rocky's answer is the correct one.
    I must admit I am not even sure you were addressing him though as you post looks like a strange ramble and looks like you signed it as Rocky as well.
    iChat to iChat over Jabber names is possible as both ends will use the iChat way of doing Video (or Audio) chats.
    iChat to another Jabber app will not do Video (Audio) chats.
    The only App on a PC that Might be technically capable is Trillian as it does Jabber and AIM. However there seems to be no way to get it's Jabber side to invoke the AIM A/V features to match iChat.
    5:32 PM Sunday; March 25, 2007

Maybe you are looking for

  • Is there a way to determine exactly where a breakpoint occurs?

    Hello everyone:  I am having trouble getting my head around this problem I am having, so I'm hoping someone here has run into something like this and has a tip for me. I have a PXI-7354 that I am using to control a rotary stage which has an 8000 lpr

  • How to enter BIOS crisis recovery mode on x120e?

    What combination of keys must be pressed? Fn+F? Fn+B? Other?

  • Display a checkbox in cfgridcolumn?

    I'm using CF8. I have an HTML-format cfgrid with several columns, populated via a CFC in the bind attribute. One of the columns I have set to type="boolean" in order to display a checkbox. However, no mater what data I send to it, it displays the dat

  • Datatype mapping problem

    Hi I've have a table with column with int4[] as data type. I have a problem with setting the type of corresponding entity bean field. I still have a message about not proper datatypes - byte array instead of integer[]. To be precise, message is: java

  • BW precalculation server is not showing the functions when right clicked.

    Hi All, I have BW precalculation server.When i tried to execute the tcode "RSPRECADMIN"-- and right click on the server it is not displaying the next window,which is used to maintain like display the queue(ctrlf10) or edit the servert etc..But when i