Trying to recreate a menu effect

I've been trying to recreate this menu effect. The image acts as the buttons, popping up and bouncing into place. Its as if the buttons are masks? Is there a tutorial for this effects, or better still a file I can download?
Many thanks.

what effect?

Similar Messages

  • Trying to recreate a text effect

    I want to recreate something similar to the image below. The text doesn't seem to have been drawn along a path,  the letters look as though they have been outlined so they can be moved individually outlining the object. Is this what is happening here? is there an easy way to make sure the text looks well spaced and alligned when doing this? Or am i totally off track and will this text just have been drawn along an open path?

    Daniel,
    In addition to what Monika said, you have two paths, based on one (you may start with the original outline, then Object>Path>Offset to get one path at a distance, then cutor copy it to apply two individual texts). To make both texts look right, you will need to apply Baseline Shift to at least one of them.

  • How can I recreate the Clarity effect in Photoshop CS6?

    Hi,
    I want to recreate the Clarity effect but in Photoshop CS6.. I know I have it in Lightroom and Camera Raw, but for academic purposes I need to create the same effect but using ONLY Pohotoshop CS6...
    Thanks,
    Juan Dent
    Message title was edited by: Brett N

    The original "clarity" technique is just a Midtone contrast adjustment, the original idea as far as I know is from Mac Holbert formally of Nash Editions. Recipe is below but Mac used to have an action on his web site (I have it too and could send). Or build your own. Here's the steps:
    Mac Holbert's Midtone Contrast 
    1. Highlight your top layer in your Layers Palette then: 
    2a. In CS I: Select Layer->New->Layer to create a new, blank layer at the top of your Layer Stack. Then, holding down 
    your Opt Key (Mac) / Alt Key (PC), select Merge Visible from the fly-down menu on the right side of your Layers Palette. 
    Be sure to keep the Opt/Alt depressed until you see the blank layer update. You should now have an additional layer at the 
    top of your layer stack. It represents how the image would appear if you had flattened your layers. Rename this layer 
    “Midtone Contrast” 
          -OR- 
    2b. In CS II: Holding down your Opt Key (Mac) / Alt Key (PC), select Merge Visible from the fly-down menu on the right 
    side of your Layers Palette. Be sure to keep the Opt / Alt depressed until you see the blank layer update. You should now 
    have an additional layer at the top of your layer stack. It represents how the image would appear if you had flattened your 
    layers. Rename this layer “Midtone Contrast” 
    3. Next double-click on the Midtone Contrast layer icon to bring up the Layer Style Palette. Change the Blend Mode to 
    Overlay and lower the Blend Mode Opacity to 20%. Now move the left “This Layer” slider to 70. Now Split away the left 
    side of that slider by holding down the Opt / Alt key and move it to 50. Repeat the same process on the right “This Layer” 
    slider, moving the sliders to 185 and 205 respectively. Then select “OK”. 
    4. Now select Filter->Other->High Pass. In the High Pass Palette set the radius to 50 and select “OK”. Now select Image- 
    >Adjustments->Desaturate. The Midtone Contrast layer is now complete. At 20% opacity it should be very subtle, but 
    noticable. The effect can be decreased or increased by raising or lowering the Midtone Contrast Layer opacity. I’ve found 
    that the proper setting can usually be found between 20% and 40% opacity. Above 40% one risks creating “halo” artifacts 
    that are visually distracting. 

  • Trying to recreate the deleted WBS

    when i am trying to recreate the deleted WBS.i am getting following error
    WBS element xxxxxxxx version FREI_VERSION already exist.
    here i want to know that how wbs and versions are related and linked ?
    thanks in advance

    Hi ,i am tying thru CN41 by entering WBS and PROJEC. path is cn41-extras in menu-delete project versions- here i enterd are    session =57
             version key =FREI_VERSION
    and enter, i am getting following error
    Project version FREI_VERSION is status-dependent
    Message no. OV010
    Diagnosis
    Version FREI_VERSION was created by a status, such as "released".
    System Response
    You cannot process this version from the project information system (for example, create, extend or delete).
    Procedure
    Enter a different version number.
    Can anybody help me.
    thank you

  • Oracle 11g imp erroneously tries to recreate existing tables with CLOBs?

    I have a shell script for loading database dumps from both Datapump and the older exp/imp.
    Often when loading dumps, I need to rename the schema owner and tablespace names (which is handled by REMAP_SCHEMA and REMAP_TABLESPACE in Datapump).
    However I have a whole bunch of dumps created with exp at this point and not that many Datapump dumps yet. As such the old style dumps are handled by the shell script in this way:
    1) A first pass imp is run using INDEXFILE to generate a file with the SQL to create tables and indexes. Options also include FROMUSER and TOUSER.
    2) A series of sed command edit the SQL file to change the tablespace names (which are schema owner specific in our case).
    3) The editted SQL file is run with sqlplus to create the tables and indexes.
    4) A second pass imp is run to load the table rows as well as triggers, stored procedures, views, etc. Options include FROMUSER, TOUSER, COMMIT=Y, IGNORE=Y, BUFFER, STATISTICS=NONE, CONSTRAINTS=N
    This shell script has been working great for loading exp dump files into Oracle 9 and Oracle 10 databases, but now that I'm trying to load these dumps into Oracle 11, it fails.
    The problem is in step 4, the imp program is trying to create some of the tables that already were created with sqlplus in step 2. The problematic tables all seem to have CLOB columns in them. The table creation fails because it tries to use the tablespace names from the dump file, which do not exist in the destination database. And when the table creation fails, imp then decides not to load the rows for those table.
    This seems like a bug in the Oracle 11 imp program. I don't understand why it thinks it needs to recreate tables that already exist when those tables have CLOB columns. Is there something different about CLOB columns in Oracle 11 that I should know about that might be confusing imp into thinking that it needs to create tables when they already exist? Maybe I need to do something to those tables in SQL so that imp does not think it needs to recreate them?
    I know that the tables with the CLOBs were created correctly because I was trying to find some way to workaround this. For step 4, I tried using DATA_ONLY=Y, in which case imp does not try to create the tables and just loads the table rows. Of course using DATA_ONLY, I don't get a lot of other things like triggers, view and stored procedures. I started to try to get around that by doing 3 passes with imp, so that I could pick up the missing pieces by using an imp pass with ROWS=N, but strangely that has the same problem of trying to recreate the existing tables.

    The only solution I've found so far as a workaround is rather convoluted.
    1. I took an export using datapump's expdp of SCHEMA1 (in 10g it will skip the table with the xmltype).
    2. I imported the data to my empty schema (SCHEMA2) using impdp. To avoid the error that the type already exists with another OID, I used the TRANSFORM=oid:n parameter e.g.
    impdp user/pwd dumpfile=noxmltable.dmp logfile=importallbutxmltable.log remap_schema=SCHEMA1:SCHEMA2 TRANSFORM=oid:n directory=MYDUMPDIR
    3. I then manually created my xmltype table in the SCHEMA2 and did a select into to load it (make sure you have the select privileges to do so):
    INSERT INTO SCHEMA2.XMLTABLE2 SELECT * FROM SCHEMA1.XMLTABLE1;
    4. I am still taking an export with exp of the xmltable as well even though I'm not sure I can do anything with it.
    Thanks!
    Edited by: stacyz on Jul 28, 2009 9:49 AM

  • Updated last night, my keynote presentation is gone. Now trying to recreate. Keynote states that animations are not available on master slides. Help?

    Updated last night, my keynote presentation is gone. Now trying to recreate. Keynote states that animations are not available on master slides. Help?

    I'm no help, but I lost a huge file too with the 10.9.2 update. It isn't ANYWHERE. Totally embarrassing in front of a large meeting.

  • Whfree can i find my channels in elements 11..i am trying to create a text effect

    I am trying to create a text effect that requires me to make all channel active.  Normally in photoshop i can find the tab near my layers  but they are not there.

    There is no channels palette in Elements.
    You can select channels in the levels command. There is generally a way to do what you want in Elements; can you give more details about what you want to achieve?

  • Elements 10 is freezing after unsuccessfully trying to rebuild content and effects library, help?

    Hi guys,
    I recently got some actions and proceded to install them as I've done with actions in the past...put them in the photo effects folder, then go to the Locale folder and delete the MediaDatabase.db3 file. (I'm on a mac, in the case that it's different for PC).
    It's worked in the past for me, but for some reason, the last time I tried that, the content and effects library wouldn't rebuild. It got 75% done and then froze.
    Luckily I had kept an old MediaDatabase.db3 file in case that ever happened. So I just deleted the unfinished MediaDatabase.db3 file and put the old one back in the folder and opened Elements 10. Elements 10 opened, but then wouldn't let me use any menus whatsoever. I got the spinning beachball of death.
    I don't know what happened...like I said, nothing I did was out of the ordinary and this has worked for me before!
    Any suggestions? Short of completely reinstalling Elements (which I don't even know if I can do, since I only got one activation code when I bought it.)
    Thank you in advance!

    Yes, you could reinstall PSE, but that shouldn't be necessary. Acivation is hardware related so it doesn't matter, and the uninstaller gives you the option to deactivate when uninstalling. Try deleting mediadatabase again, and this time also delete thumbsDatabase.db3, which is in hard drive>library>Application Support>Adobe>Photoshop Elements>10.0.
    That's assuming this isn't the app store version. Is it?

  • Trying to open an after effects file from a pc on my mac.

    Hi I am trying to open an after effects file from a pc on my mac. This is the error i get.
    'the file you are attempting to open was created with after effects version 13.2 (windows 64)'
    I am running mavericks 10.9.5, and I have updated my after effects in the creative cloud manager.
    Will it open if the person on the pc saves it as an older version?
    Thanks
    Orlagh

    No problem. Have fun!
    12.0 After Effects Help | New features summary
    12.1 After Effects Help | New features summary
    12.2 After Effects Help | New features summary
    13.0 After Effects Help | New features summary
    13.1 and 13.2 After Effects Help | New features summary

  • I am trying to download the After effects trial but it says mine is expired but I never have had this program before

    I am trying to download the After effects (cc 2014 on mac) trial but it says mine is expired but I never have had this program before

    there's nothing easy to do when a trial expires early.  Adobe trial software expired early

  • Help recreating this text effect

    Hello,
    Can someone help me recreate this text effect?
    http://tinyurl.com/3a6ogl8
    Here's my version:
    http://tinyurl.com/3ahmj98
    http://tinyurl.com/2v9k58d
    The trained eye can probably see that the original version looks much better. Why is that? Is there something obvious I'm doing wrong, or could this text have been made using a different technique?
    (whether I use Flash or Photoshop shouldn't matter as their text effects are pretty much identical)
    Many thanks!

    nevermind y'all i figured it out!!

  • Trying to render using special effects in premiere

    trying to render using special effects in premiere

    Joe ...
    I'd almost just schlepped a big gulp of coffee just before reading this ... darn glad I hadn't! 
    Neil
    (still laughing ... )

  • Trying to achieve a certain effect...

    Hi,
    I'm trying to achieve a certain effect in Motion 3, whereby the camera slowly does a full spin whilst zooming in on the video, but I can't seem to find the right method. The 'Spin' effect seems to go too fast, and what I am looking for is similar to a Pan and Zoom effect...
    if anyone knows what I'm talking about, is there any way this effect can be achieved?
    thanks.
    Message was edited by: lmg-94

    Sounds like you want the Sweep behavior, which will rotate the camera while keeping it's point of view fixed. You control the speed by trimming the duration of the behavior.

  • Im trying to create a "wobbling" effect with a bitmap

    im trying to create a "wobbling" effect with a bitmap
    any idea how to go with this with director?

    It somewhat depends on what the effect is intended to acheive.
    Here is a simple behavior script that can be applied to any bitmap. It wobbles, in the sense that it has a radom movement about its axis.
    That is acheived with the random() statements. The amount of wobble can be controlled by changing the value added to each parameter on each iteration.
    The last three statements keep the wobble from randomly walking off the frame. Again, wobble can be changed by setting the corrective value at which point the bitmap returns to its original state.
    Hope this helps.
    property spritenum
    global glocH, gLocV, gRotation
    On beginsprite
      gloch = sprite(spritenum).loch
      gloch = sprite(spritenum).locv
      gRotation = integer(sprite(spritenum).Rotation)
    end
    On enterframe
    b = random(2)
      if b=1 then
        sprite(spritenum).loch = sprite(spritenum).loch + random(2)
      else
        sprite(spritenum).loch = sprite(spritenum).loch - random(2)
      end if
      c= random(2)
      if c=1 then
        sprite(spritenum).locv = sprite(spritenum).locV + random(2)
      else
        sprite(spritenum).locv = sprite(spritenum).locV - random(2)
      end if
      d= random(2)
      if d=1 then
        Sprite(spritenum).rotation = sprite(spritenum).rotation + random(4)
      else
        Sprite(spritenum).rotation = sprite(spritenum).rotation - random(4)
      end if
    if abs(gloch + sprite(spritenum).loch) <= 8  then sprite(spritenum).loch = gloch
    if abs(glocv + sprite(spritenum).locv) <= 8 then sprite(spritenum).locv = glocv
    if abs(Integer(gRotation - sprite(spritenum).Rotation)) >=8 then sprite(spritenum).rotation = gRotation
    end

  • Since updating to IOS7.0.3 can not seem to get more signal on my iphone 5 with my manager H3G ita what I have to do I also tried replacing sim with no effect, also on ipad 2

    Since updating to IOS7.0.3 can not seem to get more signal on my iphone 5 with my manager H3G ita what I have to do I also tried replacing sim with no effect, also on ipad 2

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

Maybe you are looking for