Trying to reduce file size of my opening page in a flash site

I'm using the Flash CS4 IDE, and the first page of my site takes a lot longer to load than I want it to.  So I wanted to go through the varied images / symbols / movie clips / sounds and so on to see where all the memory is being chewed up.
When I go into my library, however, I can see the Name, LInkage, usecound and Type of my elements, but no mention of file size and I can't seem to find any right click menu that lets me add file size to the list of details being displayed.
Is there a way to make it show file size?  Or some workaround?
And are there any best practices to reduce file size aside from using symbols for anything that's used more than once and reducing image and sound quality?
Thanks

I was actually using the term pretty loosely.  I'm building a Gaia site which works by loading an Index page, then a Nav (navigation) page on top of that, and then lets you load and unload pages as necessary on top of those.
Since the Nav page never gets unloaded it's a good place to park certain content.  So it's actually my Nav page that's gotten too bloated.  And the coding is handled through a separate Nav.as file (so it's not the first frame of my nav.swf, it's all the varied movie clips I had to incorporate into my Nav.fla
I'm just looking for a way to identify which MovieClips &  sound files (only have a couple of short ones) and other assets are taking up the most memory so I can see if I can cut those down.
Also, do unused symbols use up memory or is it only the assets you actually end up adding that count toward file size?
Thanks

Similar Messages

  • Making a interactive PDF from indesign, but it's too big. Tried to reduce file size in Acrobat, but

    Making a interactive PDF from indesign, but it's too big. Tried to reduce file size in Acrobat, but it does not reduce file size.

    Use the Optimize PDF command in Acrobat, it gives you more control. I think it's under the Advanced menu in Acrobat 9 Pro and File > Save As > Optimized PDF in Acrobat X Pro.
    You might try playing around with different settings. You can also click the Audit Space button at the upper right to see if its from images or other things causing the file size problem.
    Unfortunately, InDesign doesn't write interactivity in a very optimized way. You get better results with buttons, for example, creating them in Acrobat Pro and using the Duplicate command to duplicate them across multiple pages.

  • Trying to reduce file size

    I have an eight-minute home movie that I've imported to quicktime pro after using a program to extract it from a dvd (using final cut - ntsc setting). it has no sound. the film is running around 1.23 gigs. In quicktime pro, I saved it as a hinted movie. I want to put it on the web so people can stream it, but it's way too big. Can anyone suggest a way of reducing its size without losing too much of its quality?
    thanks for any suggestions,
    jeff

    It doesn't have sound as it is an MPEG-2 stream from a DVD (which has "muxed" audio which QT won't handle).
    Open the source MPEG-2 file in MPEG Streamclip and export to Quicktime from within MPEG Streamclip.
    If you want it small you can experiment with the various setting in particular the encoder (try MPEG-4), the bitrate limited to around 1000-1500 kbps (k little b not B) and reduce the size from 720X480 (DVD size) to 352X240.
    Use AAC audio not uncompressed or the audio will make up 1/2 the file size.
    Generally if you are not familiar with QT the best thing to do is take 30 seconds of a clip and export it with various options - bitrate, codec, audio compressor and bitrate and size. Make note of the resulting file size for 30 seconds and you can figure out how long 5 or 10 or 30 minutes will be. Sorenson 3 is popular but is bigger than H263 for example.

  • How to reduce file size of pdf documents from 12 mb to 4 mb

    i am trying to reduce file size at adobe reader original document size is 12 mb i need to get it down to 4 mb , please help how

    You might be asking for the impossible or the easy. Acrobat Pro can reduce the size of PDF files, but nobody can promise any particular PDF can shrink.

  • I have to zip pdf files to email them to someone with a PC. The problem is they aren't smaller after zipping and I can't email them. I tried adjusting the Quartz filter to the Reduce file size. Now they're smaller, but the recipient can't read them. Help!

    I need to zip pdf files to email them to a PC user. The problem is file size is not reduced.
    I tried zipping them in Win 7 (which I use via Parallels 7) and sending them to the Finder to email.
    But lately nothing is reduced.  I tried choosing the Reduce File Size option in the Quartz Filter when I save the doc. The file size was reduced. However, the recipient could not read the file. Everything was blurry.
    Is there a solution?

    I am having some PDF sizing issues also, I am a BETA tester for TurboCAD Mac, and with the usage of (public) version 5, I have had some scaling issues. I have had (auto sent) 15 plus crash reports, (available as text) and had posted my scenario within the "lion- problems so far" article, so not to use up extra bandwith- or whatever- there are pictures there. I was not able to upload a PDF on site, and the staff @ Turbo CAd is working on it also. this is Lion specific new update, as I have posted many large format PDF's
    Here (edit to add url)
    Thanks for the helps!
    Johnny

  • PDF Reduce File Size makes certain pdfs HUGE

    Generally reduce file size works great for me but certain files, those coming from someone using Microsoft Publisher in particular, result in larger pdfs. She sends me newsletters for a website and sometimes the 3 page pdfs are 2-4mb. I tried opening in Preview and re-saving them using the Reduce File Size filter and the result is that they ballon up to 50-100mb!! Info for the file reveals that the pdf producer is GPL Ghostscript 8.15 and the content creator is PScript5.dll Version 5.2.2. I seem to be able to open and reduce file size using Acrobat so I'm not quite sure why Preview is choking on them.

    geekinthegarden wrote:
    Generally reduce file size works great...
    Microsoft Publisher...Ghostscript...PScript5.dll
    I seem to be able to open and reduce file size using Acrobat so I'm not quite sure why Preview is choking on them.
    Hi geekinthegarden- This does not surprise me. There are many variations and reiterations in specifications of the PDF format.
    Going from Ghostscript language interpreter, to Apple in rendering could introduce complications which we will not be able to sort out in this forum encapsulating a complete description of a fixed-layout 2D documents that includes the text, fonts, images, and 2D vector graphics which compose the documents.
    Suffice to say it is not a perfect science.
    Print PDF has a compress PDF file option as well as ColorSynch in your /Utilities folder +reduce file size+ option for PDF's. This may or may not be of use.
    You found your workaround using Acrobat, this is part of the value of having more than one PDF viewer, good computing!

  • PDF CMYK TIF Color Changes on "Reduce File Size"

    I run a Mac G4 MDD w/1GB Memory and OSX 10.4.11. Use Acrobat Pro 8.1.2 for PDF viewing, manipulation, forms, making large size files smaller, etc. Recently, I noticed an odd color change on one of 72 ads I am doing for a small 24-page publication. The background image of the ad is a CMYK TIF file placed in a QXP 7.3.1 document. After working on a revision to a previous ad, using the same set-up in QXP, the ad I created, using Output to PDF, opened in AcroPro correctly rendering the ad and background as the other 31 ads I had been working from or on. All the ads are different and have different backgrounds as well. Each ad opened in AcroPro has been made smaller by selecting "Reduce File Size" with no changes to color, drop shadows or text. But, when I selected that (RFS) menu for the 32nd ad, that background color changed completely to a lighter and much more contrasty image. I checked the TIFF background file in PS CS2 to see if it was CMYK or any different than the others. It was like the others, properly rendered and saved, but was much deeper in color. I went back into QXP and noticed the TIFF file in question had a 30% opacity selected to the image. I thought if I saved the original TIFF in PS with a screen tint overtop and flattened to the same look as the intended ad that would solve my problem. I placed that new TIFF background into the ad in QXP and made sure the opacity was 100% and output PDF as I had previously. Unfortunately, the ad turned out exactly the same with the same color shift. There must be something else causing this color change to occur, so if someone else has experienced this and can suggest an answer or posting that may help please advise. Thanks

    Cathy,
    You have posted your question in a forum dedicated to the Final Cut Studio application Color. It is a very specialized program to grade (adjust) the color in video/film images. We know nothing regarding PDFs.
    Have you tried posting this on an Adobe support site?
    Good luck,
    x

  • Why is "Reduce File Size" in the "File" menu always disabled?

    I have a rather large presentation file, about 100Mbyte, and Keynote has become almost impossible to use, because it has become so slow.
    Have to wait about 5 seconds for each letter to appear on screen after typing! Almost impossible to use Keynote under these conditions.
    So I tried to use "Reduce File Size" to reduce the presentation file size by compressing the images, but "Reduce File Size" is always disabled!
    Anybody else having such problems?
    Gerhard

    OK, sounds like memory will be fine, so let's look at some other stuff...
    Is it only one particularly keynote presentation that slows up for you, or does keynote behave in the same way even if you start from scratch and create a new presentation?
    If it's just the one presentation then there's probably some content (possibly video) within it that KN takes exception to. Sometimes a single problematic slide or piece of content can slow down the whole app.
    Is the problematic presentation one that was imported from Powerpoint? If so, import it again and look carefully at the import error/warning logs.
    Before you start keynote, start up activity monitor - which will give you an indication of what programs are using all the CPU/memory/disk bandwidth etc. You'll then have an idea of whether it is KN maxing out on CPU or whether anything else is dragging the system down.
    Another thing you could try would be to log in to a different user account on your machine (create one if necessary) and then try opening the presentation from within this different account. If this works for you then it suggests a problem with the keynote plist file in your original user account.
    I don't know if it'd be acceptable to you, but if you could post a link to your problematic presentation then I could download it and try it out on my normally reliable Keynote on one of my computers. (Make sure that you've ticked the box to embed all media in the presentation)
    Hope some of this is helpful,
    Mike.

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

  • Reduce File Size in Acrobat Pro (9.5.5) Corrupts Graphics in PDF Documents - shows up as black image

    Whenever I use Reduce File Size in Acrobat Pro (9.5.5), sometimes some of the images (not all) get corrupted and show up as a black image in the new document.
    Actually, the new reduced document looks okay when viewed in Acrobat, but the problem shows up when viewed in the Preview application on the Mac.
    I'm using Acrobat 9.5.5 with Mac OS 10.8.6
    I've tried re-importing the graphic into a new graphic box, which didn't work.  Thinking there may be some type of corruption with the actual graphic file, I then tried viewing the graphic, then taking a screenshot of it to create a completely new file, and then re-importing the new graphic file into the original document (created in Adobe In Design 5.0.4).  I then export the new document as a pdf, and brought it into Acrobat Pro to do the Reduce File Size.  Same thing happens - black box appears where the graphic was.
    I then tried using the Reduce File Size within the Save As function of the Preview application on the Mac - while the graphic remains intact, many of the other graphics in the document are "reduced" too much, to the point where the image quality is seriously degraded, and therefore not usable.
    Any other ideas?

    Hi Anoop,
    I can share the graphic file, but not the pdf which contains it (as it contains confidential information) - thanks!

  • How do you reduce file size of a PDF if Save As doesnt work?

    I have been trying to reduce the size of a PDF, using the Save As > Optimized PDF method.
    I have also tried Save As > Reduced Size PDF.
    This is on a file made up of 20 pages of full page Jpegs. (These were generated by the script in Photoshop that generates Jpeg files from Layer Comps within the document.)
    If I use Reduced Size PDF, I get a greatly reduced file size but the image quality suffers greatly. (Lots of artifacts and blurryness)
    There are no options to choose the level of compression I want.
    If I use Optimized PDF method, I cant seem to reduce the file size no matter what I set the Jpeg compression to.
    Is there some way to cut the size of the file down but not lose so much image quality?
    Any suggestions?

    Part of the problem here is that the files that are produced when I run the script to output files from layer comps are very big.
    If I "save for web" for each layer comp, I wind up with way smaller Jpegs. Thus a much smaller PDF.
    So the question is: Can you make the script, Layer Comps to Files, create smaller more optimized Jpegs? (Like you get when you save for web)

  • Why can I only "Save as Other... Reduce File Size" a single time for an Adobe X file?

    We are struggling with our form editing in that anytime we make a change and save the file size is doubled.  As a work around we started using the ...Reduce File Size save as.   However, we can only use that once per file.    Some of our forms contain several hundred fields that are edited, with the behavior as is we cannot save our work as we go.  
    Reproduction Steps...
    1. Open a file in Acrobat X and note it's file size.
    2. Make any kind of change (our work is focued on View>Forms>Edit)
    3. Go to File > Save as Other... > Reduce Size PDF
    4. Set Version Compatability to 'Retain Existing' and Save
    5. File size should be very close to the original
    6. Open the new file
    7. Rinse and repeat steps 2 and 3
    8. Note  that when you go to try to Save as the new edit, the Save As Reduce size is grayed out and no longer available for seslection.
    Please help!!!!

    Just do a standard Save As. The problem is that Save includes the old and new. Save As deletes the old. Also, if you distribute the form it is locked from editing as I understand it.

  • Reducing file sizes of multiple PDF's

    Hello everyone,
    I just got hired at a structural engineering company, and we are trying to go "paperless". I am in charge of scanning tons and tons of our old record drawings. We have an old scanner and the PDF's it creates are anywhere between 10,000Kb to 70,000Kb. After I scan every sheet, I am supposed to use the "Reduce file size" option in Adobe Acrobat. I am using Adobe Acrobat 7.0 Professional and I always make the files compatible with 5.0, which reduces the file size by 1/6 - 1/10. I've only been able to reduce 1 sheet at a time, which again, is time consuming. Is there a way I can reduce multiple files at once? I looked online and found an article here: http://help.adobe.com/en_US/Acrobat/9.0/Standard/WS65C0A053-BC7C-49a2-88F1-B1BCD2524B68.w. html, saying that in Adobe Acrobat 9.0, I can select "Apply to multiple" to reduce multiple files. Is there a way I can do it without upgrading?
    Thank you in advance.

    Unfortunately, it's not possible if you're using Acrobat XI. In previous
    versions you can tell an Action to ignore non-PDF files but this feature
    was removed in XI. Also, 35,000 files is way too much for Acrobat to
    process. You need a more robust application for such a batch processing
    task.

  • Reducing file size produces a larger file (?)

    I have a 3.8mb pdf (created in Acrobat 9) that I'd like to reduce in size. It's text only (about 450 pages) and when I select "Reduce file size" Acrobat X goes through steps to optimize it for the web, and it comes out 5.1 mb. Not really much of a reduction in size if it's now a meg and a half larger than the original. Is there a better way to do this that I'm missing here?

    There are many things that could cause the issues. Under the Optimize option (or wherever it went in AAX) there is an audit function that allows you to see where the storage is going. You could compare before and after optimization to see what was happening. You say 450 pages is not much, but that all depends on what is there. If it is a lot of graphics, it could be huge. If you use a lot of different fonts, that can cause extra storage of all those fonts. So there are many variables and sometimes they do get bigger -- happened to me too. Unfortunately, when you are trying to make things smaller, you are often under the gun and don't have time to diddle around. Good luck.

  • PDF reduce file size filters and CMYK to RGB conversion

    This doesn't seem to be on-topic to this forum, but I'm hoping someone here has the expertise to answer my question. We have some scripts which take a series of press-quality pdfs and use the "reduce file size" filter to prepare them for viewing on the web. We run these scripts on a 10.4 machine, and the filter works very well, reliably reducing file sizes of all sorts of pages.
    When we tried to upgrade the machine, we discovered that the quartz filtering has changed in 10.5 and 10.6. While it's usually an improvement, getting maybe 5-10% better compression ratios, it has become unreliable in that about 5% of my files fail spectacularly -- they blow up to 3, 4, 5, 6 times the original size.
    The other thing that happens is that the 10.5/10.6 filters munge the colors up. I found the solution to this -- in the ColorSynchUtility, make a duplicate of the Reduce File Size filter, and add a Color Management Component called Convert To Profile. This allows me to set a filter that converts the CMYK content to RGB. The problem is that there are about 40 choices of profiles, and it's not at all clear what I should use. Many of them have printer manufacturer's names in them, some say "Adobe", others have cryptic codes (probably referring to various RFCs and schemes). I've tried a couple of the ones that don't look like they are for printers, basically chosen at random. They all produce files of slightly different sizes for the reductions that go well, but on the files that blow up, some filters are better than others. (For example, I have a 5MB page which reduces to 1.4MB with the 10.4 filter, but blows up to 27MB with the "sRGB IE61966-2.1" profile, but only 12MB with the "Adobe RGB" profile.)
    So I have 2 questions:
    1) Is there any way to configure a 10.5/10.6 custom profile so that it behaves as reliably as the 10.4 "stock" PDF Reduce File Size works? It doesn't have to be the most wonderful compression algorithm out there, just so that it never or rarely has a file blow up in size.
    2) For converting press documents to pdfs that are going to go on the web, what is a good "Convert to profile" to use of the 40-some choices on the pull-down menu?

    Cathy,
    You have posted your question in a forum dedicated to the Final Cut Studio application Color. It is a very specialized program to grade (adjust) the color in video/film images. We know nothing regarding PDFs.
    Have you tried posting this on an Adobe support site?
    Good luck,
    x

Maybe you are looking for