Trying to reload tiger and upon restart i get the black/grey death screen,,
hello, 'ive had some problems with some of my programs in so i need to reloaqd tiger.. the disk appears fine on my desk top, when i click on the tiger icon, there is no problem, i get a window telling me i need to restart which i do but this is where the problem comes in... upon restart i get a frozen screen, grey and black i think its called the death screen, and it does mention kernal alot?
any suggestions?
It sounds like to me you have a bad driver installed, or you are using the wrong 10.4 installer.
For G5s older than April 26, 2005, you may use the 10.4 retail installer which looks like *
For G5s newer than April 26, 2005, you must use the disks that came with the machine to restore Tiger, or if it is older than April 3, 2006 you can use the 10.4.6 retail installer disk which also looks like the above image. The fact you are able to boot 10.3 on it suggests you have an older than April 26, 2005 Mac, though some people have been able to hack around that restriction.
Here are other causes of kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation.
Similar Messages
-
Where and How can I get the Black Lenovo Login Screen for Windows 7 for X120e?
Hello,
I just installed Windows 7 on a SSD on my X120e. It is a fresh install and I really liked the Black Login Screen that my Lenovo X120e that came on the regular drive. Is there a way to download this screen and make my login screen back to this screen?
Thanks.!qubilist wrote:
I just installed Windows 7 on a SSD on my X120e. It is a fresh install and I really liked the Black Login Screen that my Lenovo X120e that came on the regular drive. Is there a way to download this screen and make my login screen back to this screen?
Create Recovery Discs from your HDD, then load them onto the SSD.
Hope that helps,
John
ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ] -
I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.
A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time? -
The webpages tell me to change the proxy which I did and then to check for the firewall which I also did. I thought maybe the add ons where the issue so I attempted to do a safe mode without them on as well but to no avail. I am at a loss. I have uninstalled and re installed firefox 3 times now and nothing has worked.
Search for prior edition online it should be there 26 is buggy
-
i really need some advice of things that i could possibly do before i take it somewhere
Hello Vivian.C
Check to see if in Settings > General > Restrictions and if Restrictions is turned on, look at the Require Password section and see if it is set to Immediately. If it is, then that will be what causes Touch ID to not be used when making purchases and would need to be set to a different time. Check out the article below for more information to make sure you are setup.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/ht5883
Regards,
-Norm G. -
HT4623 phone froze up and now i only get the apple on my screen wont do anything
My phone froze up this morning now all there is an apple on the screen nothing is working to un freeze any ideas?
My phone just had the same problem. I have tried the hard reset buttons and power up tricks plus holding down home key when connecting to computer. Any suggestions?
-
Can I reinstall iPhoto '11 to fix any corrupted files?
You can but it will not fix anything - you have a corrupted library = not an corrupted application
Backup your iPHoto library, depress the option and command keys, launch iPhoto and ftom the resulting first aid window rebuild your database
LN -
On restart I get the expected boing start up sound and then nothing
Was using the computer just fine. When I rec'd the software update notice, I clicked OK, and upon restart, I get the boing sound and then nothing. A black screen. Is this the mother board? Hard drive? Something else?
ThxI never just install an update when it presents itself.
Some common tips and recommendations:
Reboot - even in Safe Mode
Close all programs at the least and don't run anyting
Backup and clone your system
Repair your system and clone with Disk Warrior first
Use the combo update whenever possible
Apple has improved the updater and process with 10.5.5+.
When you ask us, I prefer to see "I installed (fill in blank but "security update" or quicktime or whatever it was you actually did).
Some would also recommend running Repair Permissions first.
"Normally" it should work. In real life, we need preventative medicine. -
My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Please help…Thanks!!
Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?
Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972] -
My computer just shut itself down and upon restarting
it now will not accept my password to log into my computer desktop
How can I reset my password!!This Apple article has some possible solutions.
Best of luck. -
I can't open the browser. I double click and nothing happens. I tried uninstalling and reinstalling but every time I do this it tells me I have to close Firefox first! I have restarted and then tried downloading to no avail b/c I get the same message.
Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.
-
I did a clear data and reset on my ipod touch and upon restart it is frozen. How do I fix it?
I did a clear data and reset on my ipod touch and upon restart it is frozen. How do I fix it? I have already done the ten second hold restart with the top button and bottom button, but it still freezes. What should I do?
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
What to do?
Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
Thanks
VTry this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.
Maybe you are looking for
-
PDF opens fine, but when I try to page down or scroll down with the mouse, it hangs the file
Pdf files open fine in Acrobat 9 pro. I am having problems in page down or scroll down on the document. Only way to close the file is to go to task manager and end the program. In task manager it shows that there are 2 adobe acrobat files opened a
-
Smartview - HypExecuteQuery with suppress rows 'No Data/Missing'
Hello, I'm executing a MDX query by executing the command 'HypExecuteQuery' and I set the options suppress rows 'No Data/Missing'. But everytime, the query is working successully but without suppressing missing data. Does someone know it the suppres
-
Cannot create a region from a task flow containing facelets fragments in a
hi Please consider ADF applications migrated from JDeveloper 11g R1 to 11g R2 [1]. When using JDeveloper 11g R2 to create a task-flow containing facelets fragments and dropping it on an existing/migrated page (created using JDeveloper 11g R1) results
-
Every time I try to update Adobe Reader 11 it fails and I get this message %PUBLIC%\Desktop\., I have tried to uninstall it to reinstall it but I am unable to, can you please help. Regyeo
-
Compressor 1.2.1 - no custom mpeg2
hi there, i'm unable to make custom mpeg 2 settings. when adding a new setting, i choose mpeg-2. in the encoder tab, i only have a rate selection for 23.98, 29.97. and automatic. the other settings are greyed out. i can't even change the bit rates or