Trying to remove red pin from Maps, there is no button to remove it, folks . . .

Have had my iphone 4 for eight months. Updated to iOS 5 recently. Didn't have this problem before but I am UNABLE to remove the red pin from Maps.
Turned my phone off completely, and it seemed to remove the red pin on turning it back on. But this is not a convenient maneuver. I was able to drop a purple pin and remove it. But once a red pin is down, THERE IS NOTHING THERE TO REMOVE IT. I'm certain that there is a bug here that needs to be fixed.
Option 1 under "Directions", tap on the red pin, tap on the blue arrowhead, tap "remove pin" - - - but there is no such button to "remove pin".
Option 2, under "Directions", tap on "edit", I thought there used to be a blue "clear" button to remove everything, but there is none.
Instead under "Directions", tap "edit", tap the grey circle with a "x" inside to remove the address, but it does not make it go away, and the red pin always comes back. The blue cancel button on upper left hand corner also does not remove the red pin.
Please help. I already read multiple postings on this. I have not found the correct answer for my question. Thx.

There's no way to remove it. Either ignore it or update.

Similar Messages

How to remove red pin from map app when dropped

How do i remove or delete the red pin on the map app when it dropped?

The label that is with the pin. Touch the blue arrow to the side of it and then touch where it says Remove Pin.
EDIT: I just re-read what you said. If it is a red pin, it is from a searched address. In that one, you have to cancel the search and the pin will go away.
Message was edited by: ChrisJ4203

How to remove red pin om map app

how do i remove red pin on map app,im talking about red pin not the blue pin?

The label that is with the pin. Touch the blue arrow to the side of it and then touch where it says Remove Pin.
EDIT: I just re-read what you said. If it is a red pin, it is from a searched address. In that one, you have to cancel the search and the pin will go away.
Message was edited by: ChrisJ4203

How do I remove locations and/or pins from maps on iphone 5

How can I remove locations and/or pins from MAPS?

A purple pin is a dropped pin. You access that from the "back" of the map, but touching the lower right corner of the map. It is a pin that is dropped in the center of the map you happen to be looking at at the time. If there is no description of the pin, touch the pin and it should show a label, and on the right side of the label there is a blue arrowhead. Touch that and it will provide an address/description of the pin's location and there should be other options, such as directions to here, from here, etc., and then one to remove the pin. Touch that and it should disappear.

How do I repopulate my maps with red pins from my bookmarks?

How can I repopulate my map with red pins from bookmarks? From Bookmarks I can drop one pin at a time which is useless. I need all of my pins back on the map.

Suggest that you take a look at the excellent resource provided by Time Capule / Time Machine guru Pondini.
http://web.me.com/pondini/Time_Machine/FAQ.html
See # 14
If you are not comfortable with this,I would also suggest that you consider havng a qualified Apple repair shop perform this for you.

How to remove red eye from you video with adobe premiere elements?

I would be greatful if someone could let me know how to remove red eye from a video, which I will be using for my acting reel. Thank you!

Ang.Fel
What version of Premiere Elements do you have and on what computer operating system is it running?
Do you have an integrated set of Photoshop Elements and Premiere Elements (such as 10/10, 11/11)?
How long is this person with the red eye viewed?
There are two possibilities that I can think of, but I would have to work it through with the actual footage and adapt accordingly.
1. Keying and color correction.
2. In Premiere Elements, do a freeze frame (in Freeze Frame dialog, Edit in Photoshop Elements after Insertion + Insert in Movie Option + adjustment of duration of the Freeze Frame bmp).
In Photoshop Elements, Red Eye Tool if possible or other color correction tool there.
How did you ever get red eye in video?
ATR

I can't seem to remove a red pin from the Google map?

I don't have the option to remove the red pins. I tried click on them and then the right arrow to bring up their info. I have the option to replace it, but not to remove it. My map is getting rather full of these. What am I missing?
Thanks!

lol...I see what you mean. I didn't realize my old search stays there indefinitely. I searched for a chain store that had multiple locations, so it left pins all over the map.
Color me embarrased, and thanks

How to remove text box that appears with a red pin in maps?

In Apple maps, when I type in an address, it comes up on the map with the address in a text box and a red pin below it. I've read that you need to delete the address in search to get rid of the red pin. I want to get rid of the text box so I can see the map around the address I am searching. The text box blocks a lot of the area if you are trying to discern where on a street this address is, etc. How can I do this?
thank you,
Michelle

Thanks for the idea. I did it as far as it would go and it is actually covering the area I'm trying to see.
Knowing that if I clear the search, the area is visible. However, when I tried it and did some adjustments to the app, changing they view, it jumped back to my home address so I had to start over. I assumed there was a way to keep the pin so I don't lose my location and clear the text box as we don't need to keep seeing it as it is up in the info bar. It sounds like this is not designed into the app.
Thanks for the suggestion.
Michelle

Remove red border from required fields

Is there a way to remove the red border from required fields.?

No, not the same error message that Acrobat issues. You'll have to do your own using JavaScript. The script would check each of the required fields and alert the user if anything was wrong, but you'd have to set up your own "Print" button on the form and convince your users to use it. But they can always choose not to use it and orint without going through the checking process.
Even though there is a Document Will Print event that you can attach code to, there is no way to prevent printing in the event.

Removing Red-Eye from video - Need tips.

Folks, I am dealing with some HD content that has a lot of red eye in it. While it's common to find filters for this in photo apps, what can be done in Final Cut Pro? This doesn't seem to be as simple with video. I can't seem to find much on the issue other than color correcting each shot.

Red eye is the result of a light source on axis with the lens of the camera illuminating is the back of the eye through the cornea. You can only do this with video if you have the light on the cam (so it moves with the camera) or directly behind the cam if the shot is locked off.
I suppose you could open up Color or use the 3 way CC in FCP and isolate on the red (limit effect) and map it to black or grey. If there are other reds in the scene, you'll need to mask the correct areas.
Never done this but don't see a reason why it couldn't work.
x

I have an iPad 3 and when trying to print Pages documents from EpsoniPrint there is a border, how can I get it to print normal without sending it to my Mac?

I have both quickoffice and pages on my iPad, and when I try to print from either of those through EpsoniPrint they don't print "normal". And pages prints with a border around it. How can I adjust that or is there a better app for printing via wireless? I have an epson 510, so it's wireless capable but not AirPrint.

If you have a Mac I would recommend that your install Printopia. Here is a link to it:
http://www.ecamm.com/mac/printopia/
With Printopia, any printer that you can connect to your Mac will appear on your iPad as long as they are on the same wi-fi network. Try Printopia to see if that border goes away. Good luck!

How do I remove red tint from pictures on Firefox?

Anytime I surf the web in Internet Explorer or Chrome, pictures look normal. But when I search the web half of the time pictures have a red tint to them. Also if I upload a normal picture from my hard drive to a website through Firefox it will turn the picture a red tint. I can take a screencap of this if you need me to. How do I fix this?
== This happened ==
Every time Firefox opened
== A year ago, no idea what triggered it.

This can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.
You can disable color management to test that.
You can set the pref '''gfx.color_management.mode''' to ''0'' on the ''about:config'' page to disable Color Management.
You need to close and restart Firefox or maybe even reboot the computer to make the change effective.
See http://kb.mozillazine.org/gfx.color_management.mode
See https://developer.mozilla.org/En/ICC_color_correction_in_Firefox
<blockquote>Caveats: The new QCMS color management system introduced in Firefox 3.5 currently only supports ICC version 2 color profiles, not version 4.</blockquote>

How do I remove video effect from maps?

I changed the video effect on my maps using the inspector, I did not like what I selected. I went back into the inspector to change to another video effect. Thew inspector shows I changed it, however when I play back the clip, the old video effect is still there

In the Inspector, select "No Effect".
You can also drag a new Map and drop it on the clip.

How do I remove a child from the stage using a button click?

I have a movieclip that requires Play, Pause, Forward and Back buttons. The movieclip has actionscript at various frames to load movieclips from the library and repeat them.
I have tried using a timeline scrubber but it does not trigger the actionscript when scrubbing, only when the movie plays normally.
My possible solution is to create Fwd and Back buttons that can go to specific frames where key animations will begin.
I need to develop actionscript that will remove Children when the user clicks Back.
This is how I am loading several movieclips along the timeline from my library:
var shpA1:arSHPp1;
function attachAR1 () {
shpA1 = new arSHPp1 ();
shpA1.x = -30;
shpA1.y = 18;
addChild (shpA1);
//the interval is used to repeat the animation to represent continuous flow on a diagram
var myInterval1:uint = setInterval (attachAR1, 500);
This what I have tried so far (not working at all - no errors or trace):
function remChild1(event:MouseEvent) :void {
    if(shpA1.stage)
        trace("arSHPp1 is in display list");
        shpA1.parent.removeChild(shpA1);
        shpA1 = null
    else
        trace("arSHPp1 isn't in display list");

I did try that but it would not remove the child.
i appreciate your help though.
I am also trying to determine if a child is on the stage and if it is, remove it. I have created a button that will jump back on the timeline and the mc's that were loaded after this point in time.
This looks like it should work. It doesn't give me any errors but the mc remains on the stage.
var remMC;
if (getChildByName("mc2") != null) {
removeChild(mc2);

How can you remove old conversations from the iMac. Even when I remove them they return when I start a new conversation with the same person. Only happens on iMac with the Beta iMessage program

How do you remove an old conversation using the Beta iMessage on an iMac. When I open a new conversation with the same person the old conversation comes back

Hi,
Previously iChat had tried a Last Chat/IM option when using Saved Transcripts - which itself was an option.
iChat has also tried "Saving" the Last Chat by leaving a Chat window open and using something similar to the Lion method of showing an app in the state is was closed in.
In Messages the option to Save Transcripts has been removed and Chats or all types are saved as a matter of course.
What this tends to mean for your iChat style Buddy Chats is that it opens all the Transcripts for that buddy as a sort of History you can scroll back through if you want (I have some Buddies with saved chats gong back to 2004)
With the Syncing of iMessages with iPhones and iPads (or Touches) then it seems this works slightly differently.
Although you can delete the chat and the contents of the Chat as separate action it is true that in the Beta as soon as you connect to the same Contact that the contents of the previous chats are shown to you.
I have found that Messages stores a data base of info on iMessages in Your Home Folder/Library/Messages
I have found that deleting this chat-db removes the "History" that keep popping up.
By default the Saved "iChats" are also stored in the Home Folder/Documents/iChats (At least this is the default place iChat used and they go to the same iChats folder where ever you had it)
Some people claim removing iMessages saved here stops the "History" reappearing.
In Lion the only access to the Home Folder/Library is via the Finder's Go Menu and hiding down the ALT key
10:00 PM Sunday; June 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Trying to remove red pin from Maps, there is no button to remove it, folks . . .

Similar Messages

Maybe you are looking for