Trying to resolve conflicts fails...

i've got a motorola e850 and a motorola krzr.
both sync to the mac fine.
i have four address book entries that conflict with the entourage addr book. (the mac addr book is the correct version, FWIW)
several attempts at selecting the right entry have gotten no result.
i have even deleted the entourage entries, but they seem to keep coming back.
I'd be grateful for any advice,
JoAnna
([email protected])

After our power went off, I came home to find 64 "conflicts". Evidently an .mac folder was deleted, but I seem to have resolved that. However, no matter HOW many times i "resolve" the conflicts between the Mac and my Palm Treo 650, every few minutes Conflict Resolver pops up with the same 64 conflicts. Very frustrating. I wonder if there is a com.apple...... file out there somewhere to delete and start over.

Similar Messages

Conflict Resolver trying to resolve conflicts from 2004

It's irritating..... having used Entourage and iCal since 2004, now in trying to sync with 3g, I am getting this pop up that asks me to resolve conflicts dating back in 2004. Is there an option where I can ask it to ignore retroactive dates? My only option is 'resolve with < program here >'

After our power went off, I came home to find 64 "conflicts". Evidently an .mac folder was deleted, but I seem to have resolved that. However, no matter HOW many times i "resolve" the conflicts between the Mac and my Palm Treo 650, every few minutes Conflict Resolver pops up with the same 64 conflicts. Very frustrating. I wonder if there is a com.apple...... file out there somewhere to delete and start over.

HT201210 My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?

My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9

Problem with Dreamweaver Crashing When Trying to Resolve Bad Image URLs

I have consistently had this problem ever since using Dreamweaver CS4 (3-4 years). I constanly hand code HTML emails using Dreamweaver (about 100-150+ / yr), when I start a new email, becaue of the nature of the emails, I have to use absolute URLs for the images contained within said email. Usually when I go to create a new email, I pick up an old one, to grab keep the same basic template and then do a find and replace to update the URLs for the images contained within the email. The emails and image assets are kept on a web server and separated out with different directories, for example: mysite.com/email1/ and mysite.com/email2/. If I fail to upload all of the images from email1 into email2's directory or is I mistype the new URL Dreamweaver gets stuck when it tries to resolve the updated URLs and it can't find the images. Quite frankly, I don't need dreamweaver to resolve the URLs for images, I don't use design view and probably never will, it automatically pulling the height and width attributes is conveinient but not neccessary. Dreamweaver will stay hung up (completely unresponsive) indefinitely when this happens, and I usually have to kill the process via the Task Manager to even get it to shut down. Then when I restart Dreamweaver it rebuilds the site cache which takes at least 5-10 minutes, I have a very large internal developement server. This has caused me an absolute ton of frustration and lost time. I was hoping someone could suggest a solution.
A couple of ideas I have kicking around as possible solutions but don't know how to do:
Killing the resolving of the absolute URLs (I can't find this in the Dreamweavers settings, I haven't checked the config files themselves though)
Disabling design and split view (last resort)
In case this helps my, system info:
Windows 7 64-bit
Intel Xeon W4530 @ 2.8 GHz
12.0 GB of RAM
Abobe CS4 Master Suite
Thanks,
Jason

Thank's for replying. Since the first time I put in this answer, I've done a couple of tests to see what actually would go through the exporting process in iMovie and it turns out that I can export videos created using my webcam along with videos with slideshows.
The only problem is that with the slideshows (which is the type of video I'm attempting to export now), if I'm using all still images/pictures, I can only export videos no longer than about forty five seconds...anymore than that and iMovie crashes.
So my new question is...do you or anyone else know why this could be and how I could fix this problem? Also, I'm not very tech savy and this is the first Mac I've ever owned so more details and instructions in the answers would be greatly appreciated. Thanks.

I have OSX 10.6.8 with FaceTime 1.0.2. It rings, tries to connect, then fails. Is there an update for Facetime for this OSX 10.6.8?

I have OSX 10.6.8 with FaceTime 1.0.2. It rings, tries to connect, then fails. Is there an update for Facetime for this OSX 10.6.8?

Hi Pam TX,
Thanks for participating in the Apple Support Communities.
If you have FaceTime 1.0.2 on OS X Snow Leopard (10.6.8), you can update to version 1.0.5 to resolve this issue:
OS X: FaceTime calls no longer connect when using Snow Leopard - Apple Support
Install the latest FaceTime update available from the Updates pane of the Mac App Store to resolve this issue.
Cheers,
Jeremy

10g streams and resolving conflicts

Hello
i configured oracle streams on 2 databases using the wizards in enterprise manage (10gR2) r, the aim is to set up multi master replication quickly and easily.
If i do this how do i resolve conflicts or are they resolved automatically? I read that you can call
DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(
object_name => 'hr.locations',
method_name => 'MAXIMUM',
resolution_column => 'time',
column_list => cols);
but this is not inserted into teh scripts generated by enterprise manager. Is it there a default conflict policy? or can i
configure this globally?
Also i noticed that my servers from time to time stop reqwplication and flow gets paused with an enqueue error. Is this just a resource issue?
I am limited currently as I am trying this out with vm images.
Am willing to upgrade to 11g if functionality of streams is better.
Thanks
Edited by: user573756 on 06-Jun-2010 07:45

You are seriously confusing totally different technologies.
The name of this forum is Advanced Queueing.
Your question appears to be about Streams
Then you ask about multimaster replication which sounds like Advanced Replication.
What are you actually doing and with what technology are you doing it?
I have no experience doing this with EM, only hand coded scripts via SQL*Plus so I can not comment on what EM is doing or not doing.
But without a clear understanding of what conflicts are possible in the case of your design it is impossible to advise you further. A well
designed system should make conflicts if not impossible ... extremely rare and narrowly focused.

Trying to resolver last few OSX update issues - Advice Needed!!

I've resolved most of my problems since updating to 10.4.9 but still have a few. They are:
• System freezing up several times a day
• Ichat continually loosing its connection
• certain apps crashing
Here is what I've done so far that resolved most of my problems, just wondering what else I should do.
I've done this: repaired disk permissions, started up from install disk and ran repair disk, zapped pram, restarted and repaired disk permissions from disk utility.
I've found several solutions in this forum that are different, so I'm not sure which one I should follow. Here are the ones I found:
1) Unplug all peripherals including disks, printers, everything except keyboard/mouse. Run permission repair from your HD Run repair disk from your software install DVD. Move the preference file to the trash (com.apple.softwareupdate.plist). If there is more than one, trash them all and then restart.
2) Unplug all peripherals including disks, printers, everything except keyboard/mouse. Repair permissions, run Disk Warrior if you have it. Apply the COMBO updater, not the software update. Restart, apply permissions again, restart. Then, one by one, reattach peripherals, restarting after plugging in each. Repair permissions again after you are finished.
3) The Apple Store Genius replaced 10.4.9 with 10.4.8 and, my problems are all solved. Prior to installing 10.4.8 he ran repair disk, but it did no good. After the install I optimized "update prebinding" with Mac Helpmate 1.1 and found prebinding to still be disabled on many files, so that condition appears to have not contributed to the problem; it may, in fact, be "normal." The Genius recommended, without explanation, that I put off updating to 10.4.9. He didn't have to tell me twice.
Any suggestions on which of those I should do? I kind of hate to go back to 10.4.8 at this point, and wasnt sure if I need to try reinstalling the combo update or what. Any suggestions would be great, a step by step of what I should do and I'll buy ya good six pack!! I work at home full time and am loosing tons of time trying to resolve this.
Much thanks!!
Brown.Recluse

Hey, I'm one of the biggest apple zealot macheads around, been buying apples since my apple classic in 1991 I believe and have bought a new mac every few years since. My current G5 cost more than my Jeep. I bought the first gen of the Ipod, have bought two others, have the apple tv and will certainly buy the Iphone when it comes out.
I have always always preached the ease of use of the macs, and have litterally converted dozens of people of the last decade to switch to mac.
But I do think its more than a little hipocritical to run adds with the pc guy injured from trying to upgrade to vista, and at the same time we need to follow a 15 step guide(http://www.macmaps.com/upgradefaq.html) just to do a system update. And apple not making a judgement call on permissions, that is beyond my comprehension that they can't definitively say when or if it should be done.
And yes, I have told my begineer apple friends to always read the docs in the readme, but that barely says anything compared to what you and others have suggested that needs to be done in order to do a safe upgrade in "Steps for avoiding update failures". I've just been a bit frustrated lately since doing the 10.4.9 update. And another HUGE frustration was spending six months convincing my best friend to get a mac, she buys the top daddy 24 Intel Imac, gets it home, I go to show her the super cool video Ichat to our friend in another state, and guess what? She gets the dreaded "user failed to respond". She could text chat but no video. She was not using a router, and has a fast broadband connection. She paid extra from the apple store to have lots of ram installed so it wasnt that. So as a test I downloaded skype and she could video chat fine with that. She spent 2-3 hours on the phone with apple support trying to get help with Ichat and it still doesnt work, and its a BRAND NEW MACHINE!! And then she runs the latest system update and POW her system is a wreck now. Sorry to vent, just a little embarrased that I talked her into buying the mac and she has had nothing but trouble since she bought it. I guess this is where the secret apple spiders will delete this post...
I do agree on the backup concept, I have everything backed up to multiple destinations, including an external drive, online backup, and periodic major backups to DVD's that go in my safe depost box.
Brown.Recluse

Metadata Panel - Resolve Conflict?

In the Metadata panel, when Metadata Status is “Up to Date”, why does LR still display the “Resolve Conflict” button to the right. Is this normal behavior for LR 3.2? I tried both Save Metadata to File and Read Metadata from File, and the Resolve Conflict button stills shows. Clicking on Resolve Conflict does not appear to do anything.
Mac OS X, ver 10.6.4

Jeff - Thank you for the response.
I use the thumbnail Unsaved Metadata badge to save metadata to files; I can read and write metadata to/from files without any problems. I have verified this with Bridge. On my system, the little icon that appears to the right of the Metadata Status field that displays Resolve Conflict when you hover over it does not seem to serve a useful purpose. Nothing happens when you click on the icon; and Resolve Conflict is displayed for both Metadata status set to "up to date" or "Has been changed".
Is this normal for LR3.2 or is it unique to my system?

Resolve conflicts later for notes

I updated the lastest version to iPhone (4) yesterday and had conflicts in Notes. It asked if I wanted to resolve now or later. I clicked "later." Today, when I synced it again (tried four times), it won't bring up the conflicts so that I can resolve them. My iphone is only showing the older info in Notes and not the newer info that I had typed a few days ago (hadn't synced for a week). I don't use Outlook for email if that helps at all. Any advice?

Hello Sandeep,
I went through the link you suggested and many thanks for that. It was wonderful but I am afraid that my question is still unanswered. My problem is in step 3 (in the link). In step 3, we need to resolve conflicts. If there are many conflicts, we can export it to excel and give the decisions there.
I do not have any problem for giving decisions for conflicts with Description "Added to current/modified". My problem is with Description "Changed in both(different)". This conflict occurs when there is same object in both rpds but have different properties. In the admin tool itself, I can resolve such conflicts by choosing "By property" under Decision and choosing in the radio buttons which properties (of modified, current or original) to retain in the merged rpd. But on exporting to excel, I can't make that choice as I make in the radio buttons. All I can do is set "By Property" in Decision column. This is my problem. I hope I made it a little bit clearer.
Thanks in advance.

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

I'm trying to resolve a battery usage problem

I'm trying to resolve a battery usage problem on my iPhone 5S ...
Have been working with an Apple agent via chat and I'm 99% certain it's a software problem, but I can't isolate wish software ...
So, I'm going to set up my iPhone up as new (when I did this as part of identifying where the problem is, it help its charge for 24 hours) but I have a problem with photos ...
I can see photos on my iPhone (restored from an iCloud backup) up to date, but on my iMac/iPhoto with my iPhone attached i) I can only see photos on my iPhone up to a date in the past (mid October 2014) and ii) iPhoto says all photos have already been imported ...
How can I (can I) get the more recent photos onto my iMac e.g. into a folder and then import them from there into iPhoto?
Also, why is the restore from an iCloud backup taking so long (it's been 14 hours now) when I'm pretty certain everything's now there that should be?

Just to add ... my real problem is that I can see photos on my iPhone, but in iPhoto with the iPhone connected, I can only see photos up to a certain date - weird?!!!

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

I keep trying to resolve Safari website problems with my 2 iPads -

I hate iPads at the moment. I keep trying to resolve problems I am having with my iPads …2of them… one an iPad2 and the other a mini… so it is not my iPads. I cannot log into many of my online accounts with Safari on any of my iPads. It seems to be when I use passwords with capitalized letters and numbers on some of the sites I am trying to access.
I have called my banks and Apple but it is acting up again. No one has heard of this and I doubt I am the only one in the world with this problem… but there is no where to go to get help
It has to be Safari.

When you said that you talked to Apple about this problem, I assumed that you tried clearing cookies, data and history. But to this point here .....
painterj wrote:
well... I am off to do some more snowblowing outside. I really appreciate your help so far and I will check back when I return from my winter adventure
I'm so tired of shoveling and snow blowing, I could scream. Good luck to you!

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.

Photoshop CS6 mac OS X 10.9.5 - cannot update 13.0.6 - error "Update failed - unable to write at location." Tried manual update also failed. Tried to change permissions also failed.
Follow write permission on thread below - same error message
Re: CS6 updates and Mac write permissions
Need Adobe help to solve this. My own searches in Forums and Google all have failed.

It is not an Adobe problem. You have a OS permissions problem. You can try to correct this by using Disk Utility to Repair Permissions. It is in the First Aid area of Disk Utility.

The last update failed on my window 7 pc, resulting in me having to try it manually download and install, this also failed leaving my I tunes not working, I tried restore back to a safer date, but every time it tried to update it failed. eventually i

The last update failed on
my window 7 home prermium pc, resulting in me having to try it manually download and install,
this also failed leaving my I tunes not working, I tried restore back to a
safer date, but every time it tried to update it failed. eventually it told me
to delete and reinstall, this fails due to the apple mobile device service
failing to start, and asking me if I have sufficient privileges to start system
service, I have tried all suggestions on iTunes page, ie delete everything to
do with apple, and start as administrator, nothing works, help please

I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

Trying to resolve conflicts fails...

Similar Messages

Maybe you are looking for