Trying to resolve Recursive BOM Component issue in Tcode CO46

Hello,
I am trying to identify the problem component when running CO46 and getting a "Recursive BOM Component" message.
I thought I would try to catch the bad component in the debugger, but I can't seem to find where to put the Breakpoint or identify a field to put a Watchpoint on.
Has anyone else had this issue and were you able to ID the BOM Component that was causing the issue?
Thanks very much for your help.
Andy

Dear all,
I resolved the Issue myself
SPTO and MAST table table has the all the details
Regards,
Gaurav Sood

Similar Messages

PO with BOM component issue?

Dear Gurus,
Po updation and creation will go to third party system.
In PO, the material X carries Y BOM component with different grid sizes like 26 26, 26, 28 etc...
But, in PO, I am not finding any of these grid sizes coz these r not subcontracting...
The idoc carries PO informations also BOm component.
But, how third party system gets these grid sizes value which are maintained in BOm componet i.e.; Y.
Please help..

Hi,
Check on it:-
Purchase Order With BOM (Components)
Table for BOM components of Purchase Order
pherasath

Accidentally deleted only User in Directory Utility while trying to resolve "No preference pane" issue.

I have made a bit of, as far as I can tell at this point, a large mistake. After installing Mountain Lion from Snow Leopard, I encountered an issue where I couldn't load the Users preference pane. I attempted to resolve this with the instructions found here: https://discussions.apple.com/thread/4270303?start=0&tstart=0. Instead of deleting the JPEGPhoto, I used the wrong "-" button and deleted the whole user, that is the user from the lefthand pane. That user was also my administrator user, as well as only user on this computer. Now I can't go into anything really that requires Authentication, as that account and password no longer exist, and I can't reach Users and Group preferences because of the initial issue. I should also mention that I am abroad in countries without Apple Stores, so bringing my MacBook in is not an option, nor is re-installing Mac OS X as I do not have the disk and ML is downloaded from the App Store, which I now can't log into and see my purchases... How can I create an account that acts as an administrator? I'm afraid to log off or restart in the event that I can't log in into anything. Also, the user's home directory is still there, so I still have my stuff, but if I restart or anything will it be gone?

If you followed the instructions, you have a backup and you know how to restore from it. Do that.

Recursive BOM - issue

Hi,
This is actually a bit Techno-functional type issue we have here.
There is a material having a recursive BOM. That means when it explodes it explodes into the same material.
So in Sales Order
item 10 - Material X
generates item 20 - material X.
After the GR is done as expected on Material X but in Item 20.
Till this part everything is fine.
Now we create the billing document. It should actually pick up Item 10 but instead it picks up item 20. Can you tell me any configuration / routines which can be done to avoid this issue.
We have the billing documnet which is referencing the Order and not the delivery.
Any suggestions would be very useful.
Thanks and Regards,
Arnab.
Edited by: Arnab Panigrahi on Jul 2, 2008 3:10 PM

Dear All,
I am having similar issue, Can any one help me in this regard.
As per my client requirement:
For Ex:
Scenario 1:
To produce 100 kg of A, 102 kg of A is used.
Due to Market return stock 2 KG will processing loss or indivisible to loss.
As per business policy i can't change these BOM Header & Item Quantities.
The system cannot cost material A and issues an error message.
Scenario 2:
To Produce 100 Kgs of A Material(FG), We need B Material 98 KG(SFG).
Product is ready and despatched to Market.
After Some time Few Stocks will come as Market retunrs in FG Stage(A).
We need to Re-Process the same and stock will converted to SFG(B).
During this case also i am getting Recursive BOM errors.
Due to in A Material BOM ,B is a component already-Costing run Completed sent to Market. Now I am Converting the stock of A to B through a Production order while maintaining A as Component for B Material BOM.
Every stage i have alternative BOMs.
As per the requirement i can't avoid, Please suggest is there other user exits or Message control or Process to resolve the same.
Regards
Manoj Kumar Pedada
SAP CO Consultant

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

If you don't have a rescue email address (or you do but aren't the receiving the email to it) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Are apple trying to resolve battery life issue ?

Hi,
Since updating my iPhone 4 to iOS 5.1 my battery life has significantly decreased.
Like myself several other users are having the same problem with terrible battery life.
I am just wondering are apple trying to resolve this issue and if so by doing what ??

There is no way to knw what Apple is trying or what they are doing, unless they announce -which is very rare.
Most have no issue. They released 5.1 to help resolve ths issue. Try doing a forum search to see if you can get some help extending your iphones battery life.

Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

Is the Wi-Fi button greyed out? Try this article: http://support.apple.com/kb/TS1559
Also, make a backup to iTunes of the device. Then restore it as a new device. If you still have wi-fi greyed out, then contact Apple again, and explain that you believe you have a hardware issue. They may still ask for a $19 deposit, but if it is actually hardware related, then you won't be charged the $19. Only if it is software related do you get charged that $19.

Trying to resolver last few OSX update issues - Advice Needed!!

I've resolved most of my problems since updating to 10.4.9 but still have a few. They are:
• System freezing up several times a day
• Ichat continually loosing its connection
• certain apps crashing
Here is what I've done so far that resolved most of my problems, just wondering what else I should do.
I've done this: repaired disk permissions, started up from install disk and ran repair disk, zapped pram, restarted and repaired disk permissions from disk utility.
I've found several solutions in this forum that are different, so I'm not sure which one I should follow. Here are the ones I found:
1) Unplug all peripherals including disks, printers, everything except keyboard/mouse. Run permission repair from your HD Run repair disk from your software install DVD. Move the preference file to the trash (com.apple.softwareupdate.plist). If there is more than one, trash them all and then restart.
2) Unplug all peripherals including disks, printers, everything except keyboard/mouse. Repair permissions, run Disk Warrior if you have it. Apply the COMBO updater, not the software update. Restart, apply permissions again, restart. Then, one by one, reattach peripherals, restarting after plugging in each. Repair permissions again after you are finished.
3) The Apple Store Genius replaced 10.4.9 with 10.4.8 and, my problems are all solved. Prior to installing 10.4.8 he ran repair disk, but it did no good. After the install I optimized "update prebinding" with Mac Helpmate 1.1 and found prebinding to still be disabled on many files, so that condition appears to have not contributed to the problem; it may, in fact, be "normal." The Genius recommended, without explanation, that I put off updating to 10.4.9. He didn't have to tell me twice.
Any suggestions on which of those I should do? I kind of hate to go back to 10.4.8 at this point, and wasnt sure if I need to try reinstalling the combo update or what. Any suggestions would be great, a step by step of what I should do and I'll buy ya good six pack!! I work at home full time and am loosing tons of time trying to resolve this.
Much thanks!!
Brown.Recluse

Hey, I'm one of the biggest apple zealot macheads around, been buying apples since my apple classic in 1991 I believe and have bought a new mac every few years since. My current G5 cost more than my Jeep. I bought the first gen of the Ipod, have bought two others, have the apple tv and will certainly buy the Iphone when it comes out.
I have always always preached the ease of use of the macs, and have litterally converted dozens of people of the last decade to switch to mac.
But I do think its more than a little hipocritical to run adds with the pc guy injured from trying to upgrade to vista, and at the same time we need to follow a 15 step guide(http://www.macmaps.com/upgradefaq.html) just to do a system update. And apple not making a judgement call on permissions, that is beyond my comprehension that they can't definitively say when or if it should be done.
And yes, I have told my begineer apple friends to always read the docs in the readme, but that barely says anything compared to what you and others have suggested that needs to be done in order to do a safe upgrade in "Steps for avoiding update failures". I've just been a bit frustrated lately since doing the 10.4.9 update. And another HUGE frustration was spending six months convincing my best friend to get a mac, she buys the top daddy 24 Intel Imac, gets it home, I go to show her the super cool video Ichat to our friend in another state, and guess what? She gets the dreaded "user failed to respond". She could text chat but no video. She was not using a router, and has a fast broadband connection. She paid extra from the apple store to have lots of ram installed so it wasnt that. So as a test I downloaded skype and she could video chat fine with that. She spent 2-3 hours on the phone with apple support trying to get help with Ichat and it still doesnt work, and its a BRAND NEW MACHINE!! And then she runs the latest system update and POW her system is a wreck now. Sorry to vent, just a little embarrased that I talked her into buying the mac and she has had nothing but trouble since she bought it. I guess this is where the secret apple spiders will delete this post...
I do agree on the backup concept, I have everything backed up to multiple destinations, including an external drive, online backup, and periodic major backups to DVD's that go in my safe depost box.
Brown.Recluse

Gumbo in Flex builder 3: cannot resolve FxApplication to component implimentation

Hello everyone,
I've been banging my head on the keyboard over this issue for a while. I've downloaded and successfully installed 2 seperate versions of the nightly Flex Gumbo SDK 4.0.0.6831 and 4.0.0.6898 (two versions because i had first assumed that the error was a nightly bug). I've set the Flex compiler to use the new 4.0.0.6898 build and changed the Require flash player version to 10.0.0. Everything set right?
so i put this:
<Application xmlns="http://ns.adobe.com/mxml/2009" layout="absolute">
<FxButton label="Hello World" />
</Application>
and get the error at compile time: Gumbo in Flex builder 3: cannot resolve <FxApplication> to component implimentation. I've tried everything: <Application>, changed the namespaces, and more. Any other ideas?
Thank you in advance -brandon

Try something like this:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/halo">
    <s:Button label="Hello World" />
</s:Application>

FABridge - Error: You are trying to call recursively into the Flash Player [...]

I'm using FABridge to communicate between JS (and GWT) and a flex component I've written, but I've run into a strange error:
You are trying to call recursively into the Flash Player which is not allowed. In most cases the JavaScript setTimeout function, can be used as a workaround.
I know what the error means, but what I don't understand is why I'm only receiving this error when I run the application locally (127.0.0.1) in this one webapp.
Once I upload the app to the remote testing server, the error goes away and the app functions as it should. I've tried to use setTimeout without any luck.
I thought this might be a crossdomain problem so I set Security.allowDomain("*") in flex and the same on the testing server via a crossdomain.xml file but this did nothing.
The function that is being called takes a parameter (image or an image wrapped in swf file) via the querystring and adds it to the stage. The files all exist on the remote server.
Another strange part is that when I run the flex app via Flash Builder it behaves fine. Also, I've run the component as part of a separate project locally without issue.
The problem only exists when I run the component as part of the this project, when I'm working on it locally. I even have another local app using the same component that works fine.
I'm at a loss. Any ideas?

Ok, I was excited when I noticed I didn't change allowscriptaccess, but that didn't work.
Just to recap:
-I have Security.allowDomain("*") as the first line in the init() (creationComplete) function
-I have a crossdomain.xml file located on the remote server that allows="*" and ports="*" (because gwt debugs through :8888)
-allowscriptaccess is set to always
-I am using FABridge to communicate between JS and the swf. Calling the function directly from Firebug causes the same error.
Even trying to call a function that is completely unrelated to the remote domain produces the same error. For example, getAppHeight(). So at second glance, this doesn't seem to be a security issue?
The only post (Google Cache) about the error suggests I use FABridge.MethodsToCallLater which doesn't seem to exist anymore in the version of FABridge that I downloaded. The copy of FABridge I have doesn't have any version information in the file, but I believe I pulled it from the Flex 3 SDK.
Can anyone tell me if that feature has been removed/added in recent versions? Or any other insights into my current situation? Thanks for looking!

System ask for recursive BOM

To SAP GURU,
I have 1 problem in master ecipre .I have halb( SFG-1 ) which is having 2 halbs ( SFG-2 & SFG-3 ). Again this 2 halb is having their multilevel bom .respectvely .SFG-2 is having co product ( Co po -1 ) which is again input in SFG-1 .
Now when i am saving recipe of SFG-1 system ask me that SFG-2 mat code is recursive & for also co product system ask me about recursive .Now unless & untill i will click on recursive allowed system dont allow me to save the recipe .Even if i saved recipe by clicking on recursive allowed in mrp run system not explode the BOM of SFG-2 .
Only when header material is used in bom compnent then only bom will be recursive but in my case even if i have not used header material in any of my bom component still system ask me abaut recursive ..So can u tell me is i am missing some where or some solution is their Now i am trying to solvr it by SAP notwes 161742.( Or any latest SAP note is available )
Please tell me is their any valid solution .
SANIL

Sanil,
what ever you mentioned is true , the only problem you are facing error is related to BOM level.
SFG-2 and its co product ( Co po -1 ) you are putting in same BOM level ( ie in the BOM of SFG-1 )thats why you are getting this error.
as Co Po-1 will be produced after the production of SFG-2 so it can be at lower level where SFG-2 is maintained.
Think on it , its logiocaly correct , your co product can be produced before your main product.
Check out and revert back.
Regards
Ritesh

BOM component and PGI

Hi All,
I'm trying to test how the system will react, by allowing me to PGI if I short confirm a BOM component. So if I confirm the mouse for 2 pieces instead of 3, would it allow me to PGI and invoice.
eg. sales order for:
Item 10 pc x 3
Item 20 keyboard x 3
Item 30 mouse x 3
But confirm the delivery for:
Item 10 pc x 3
Item 20 keyboard x 3
Item 30 mouse x 2
Can anyone assist me in the process. We have Warehouse Management running so TO are part of the process.
I'm not sure of the process exactly, so here goes:
Create SO > Create Delivery doc > change Item 30 to quantity 3 in del'y doc. > create TO.
Once the TO is completed ( pick & transfer) then PGI. If PGI is completed then create the invoice.
Any assistance please?
Rgds
TV

Hi Tony,
If you want to do PGI for 2 pcs instead of 3 pcs for a BOM component, then the system will allow to do and will do PGI for that quanitity.
If you have warehouse management then the process will follow as follow
Normally Picking can be donw in two ways
1. Manual Picking
When you dont have warehouse management, then in changemode of delivery, you maintain quanitiy in Picking field, in Pick tab in delivery.
And the picking quanity should not be greater than delivery qunaitity.
2. Automatic Picking
If you have warehouse management, then you cant do manual picking. You have to do pikcing using TO.
Process is as follows
1. Create Sales Order (VA01)
2. Create Delivery (VL01N) or (in sales order change mode, goto Sales Document -> Deliver)
Here the selection date should be req. delivery date of your sales order.
If you can go in change mode of delivery and see the Pick tab, pick quanity will be grayed out. that means you cant give the pick qty manually for this you have to create TO.
For BOM Material, Header component will not be reflected in the Delivery, Only sub components can be reflected in the delivery. As header component is not relevent of Picking. So, If you have only limited qunaity available for a req. del. date say 2 pces instead of 3 pcs, only that qty is picked in transfer Order.
3. Create Tranfer Order (TO) (LT03 or goto change mode of Delivery, click on Subsequent Function -> Create T.O.)
4. subsequently you can confirm the Transfer Order (LT03, goto Transfer Order -> click on Confirm -> Transfer Order)
Now Pickng is done.
5. Now do PGI, change mode of delivery (VL02N) click on Post Goods Issue.
Now for your delivery PGI is done, and what ever the qty is picked in that delivery, that can be done for PGI.
6. Create Invoice (VF01 or VF04)
Hope this clear.
Reward if helpful.
Thanks,
Praveen

Bom Component qty & WIP Quantity differ at Trget cost calculation

Dear gurus,
i am facing the problem with WIP at target cost calculation in REM.
My issue is
BOM Component qantity is 9.524 TO and price is 2000 then total cost is 9.521*2000=19048.
but in WIP Report kkas in WIP explation it takes input qty 9.52 T0 and price 2000 then total price is 19040.
Difference is 19048 - 19040 =8
and also when i am issuing actual qty i.e 9.524 in BOM then my price is 19048.00 ant at time of variance calculaton then quantaty variance as 9.52.0-9.524.0=-0.04 then 0.004*2000 =-8
Please suggest solution for this.
Any OSSS NOTE Required
any Quires please revert back
REGARDS
Avinash.pegarlawar

Hi
Rounding differences between target and actual values and quantities are not unlikely to occur and cannot always be avoided but can be minimized.
Small prices and price unit of 1 are likely to cause more of these rounding differences..
The actual credit is simply calculated as price * quantity. The target credit however is calculated during the variance calculation
and based on the sum of all items in the itemization/cost components of the cost estimate and therefore more accurate.
To avoid this I suggest to store the material price with a larger price unit, i.e. 1000
Std cost release stores price upto 2 decimals and target cost calculation goes upto 3 decimals...
Please check also the note 1265918 for more information to this topic.
Regards
Ajay M

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

Copy BOM Component Characteristic value in material PR created by MRP Run

Dear Gurus,
My requirement is I have materials like thread to maintain color characteristic i have create class - color- class type is 023 , now i want user should able to maintain characteristic value in BOM component (thread) of semifinish material. FG , SFG are not having any characteristic.
Now in PR and PO we can maintain characteristic value in Material Data --->Configuration tab , Configuration tab will come only when there is tick in material is configurable at material basic data 2 view of thread and in CU41 I have to maintain material for class type 300 - Variant , then in class assignment i have select class type 300 and 023 both and maintain class , both are having same characteristic please make me correct if i am doing wrong process, if i am not maintaining class assignment 300 in CU41, in manual PO system not allowing to enter characteristic value in configuration tab . so i maintain both class assignment 300 and 023.
Now for manual PR and PO system showing configuration tab and from PO configuration tab characteristic value is coming in MIGO automatically but when i am running MRP for finish material the auto PR generated by system for material thread is not showing configuration tab in Material Data of PR. I have maintain characteristic value in BOM --->Extra--->Batch Classification. Please guide me how to archive this.
Thanks & Regards
Akshay.

Akshay kukde,
Still i am unable to understand the reason for maintaining a characterstic value for a batch through BOM, I hope you are not changing BOM for every purchase order ?
can you explain what you expect by maintaing this one value for batch characterstic?
you can have many other simple option like
1) Create a material with colour included in it ex, Thread_red, Thread _green etc and use them in BOM
2) Use text in BOM to hold this discription for colour
3) Use batch management, class 023 in material master classification , defalut value for colour, purchase order will be created and while doing GR you can change in colur if its different then default you set earlier.
Akshay kukde wrote:
if i am creating PR Manually -ME51N , system showing configuration tab , where i can maintain characteristic value , which then reflecting in PO and from PO to MIGO
The above scenario I have tried by maintaining class type 023 and same characteristic in material Master. but result is same for auto generate PR by MRP- configuration tab is missing.
My requirement in this case is characteristic value should flow from BOM to PR generated by MRP.
when you manualy create PR you Thread material is consider to be a configurable material and thats why you are able to input configuration value, otherwise as soon as you put this configurable material inside a BOM of normal materila it loost its configuration feature, if you want you can create your parent material also as configurable material, assign same class to it and create configuration profile and take MRP run this time you will get PR with configuration tab as your thread get configuration derived from parent.
Hope above details may help you.
Check and reply, also mark replies helpful if it helps you.
Thanks
Ritesh

Trying to resolve Recursive BOM Component issue in Tcode CO46

Similar Messages

Maybe you are looking for