Trying to resolver last few OSX update issues - Advice Needed!!

I've resolved most of my problems since updating to 10.4.9 but still have a few. They are:
• System freezing up several times a day
• Ichat continually loosing its connection
• certain apps crashing
Here is what I've done so far that resolved most of my problems, just wondering what else I should do.
I've done this: repaired disk permissions, started up from install disk and ran repair disk, zapped pram, restarted and repaired disk permissions from disk utility.
I've found several solutions in this forum that are different, so I'm not sure which one I should follow. Here are the ones I found:
1) Unplug all peripherals including disks, printers, everything except keyboard/mouse. Run permission repair from your HD Run repair disk from your software install DVD. Move the preference file to the trash (com.apple.softwareupdate.plist). If there is more than one, trash them all and then restart.
2) Unplug all peripherals including disks, printers, everything except keyboard/mouse. Repair permissions, run Disk Warrior if you have it. Apply the COMBO updater, not the software update. Restart, apply permissions again, restart. Then, one by one, reattach peripherals, restarting after plugging in each. Repair permissions again after you are finished.
3) The Apple Store Genius replaced 10.4.9 with 10.4.8 and, my problems are all solved. Prior to installing 10.4.8 he ran repair disk, but it did no good. After the install I optimized "update prebinding" with Mac Helpmate 1.1 and found prebinding to still be disabled on many files, so that condition appears to have not contributed to the problem; it may, in fact, be "normal." The Genius recommended, without explanation, that I put off updating to 10.4.9. He didn't have to tell me twice.
Any suggestions on which of those I should do? I kind of hate to go back to 10.4.8 at this point, and wasnt sure if I need to try reinstalling the combo update or what. Any suggestions would be great, a step by step of what I should do and I'll buy ya good six pack!! I work at home full time and am loosing tons of time trying to resolve this.
Much thanks!!
Brown.Recluse

Hey, I'm one of the biggest apple zealot macheads around, been buying apples since my apple classic in 1991 I believe and have bought a new mac every few years since. My current G5 cost more than my Jeep. I bought the first gen of the Ipod, have bought two others, have the apple tv and will certainly buy the Iphone when it comes out.
I have always always preached the ease of use of the macs, and have litterally converted dozens of people of the last decade to switch to mac.
But I do think its more than a little hipocritical to run adds with the pc guy injured from trying to upgrade to vista, and at the same time we need to follow a 15 step guide(http://www.macmaps.com/upgradefaq.html) just to do a system update. And apple not making a judgement call on permissions, that is beyond my comprehension that they can't definitively say when or if it should be done.
And yes, I have told my begineer apple friends to always read the docs in the readme, but that barely says anything compared to what you and others have suggested that needs to be done in order to do a safe upgrade in "Steps for avoiding update failures". I've just been a bit frustrated lately since doing the 10.4.9 update. And another HUGE frustration was spending six months convincing my best friend to get a mac, she buys the top daddy 24 Intel Imac, gets it home, I go to show her the super cool video Ichat to our friend in another state, and guess what? She gets the dreaded "user failed to respond". She could text chat but no video. She was not using a router, and has a fast broadband connection. She paid extra from the apple store to have lots of ram installed so it wasnt that. So as a test I downloaded skype and she could video chat fine with that. She spent 2-3 hours on the phone with apple support trying to get help with Ichat and it still doesnt work, and its a BRAND NEW MACHINE!! And then she runs the latest system update and POW her system is a wreck now. Sorry to vent, just a little embarrased that I talked her into buying the mac and she has had nothing but trouble since she bought it. I guess this is where the secret apple spiders will delete this post...
I do agree on the backup concept, I have everything backed up to multiple destinations, including an external drive, online backup, and periodic major backups to DVD's that go in my safe depost box.
Brown.Recluse

Similar Messages

  • Kernel Panic Error after last MAC OSX update

    Hi all,
    My first post here.
    Last week, after install the last update of MAC OSX on my intel IMac (last of 2009), when the computer was restarting, a kernel error screen appears...
    I've launched the safe mode, and the computer starts fine and I've execute the disk utility to repair HDD and rights. I've done the same initializing from the installation DVD, but the kernel error appears again...
    I leave only the usb apple keyboard plugged, and I don't understand why this error still happening, and of course why it occurs after a MAC OSX standard update (no new hardware or software installed in the las month).
    I'm little desperate with this issue
    kernel error.
    Many thanks in advance!
    Best regards
    Hugo
    PS: This is the Kernel error report:
    Kernel Error
    panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x0029f24f, type 14=page fault, registers:\
    CR0: 0x8001003b, CR2: 0x01489000, CR3: 0x00100000, CR4: 0x00000668\
    EAX: 0x00872c8c, EBX: 0xec835357, ECX: 0x5d27b1e9, EDX: 0x01488ffd\
    CR2: 0x01489000, EBP: 0x5130bd18, ESI: 0x00000000, EDI: 0xec835357\
    EFL: 0x00010202, EIP: 0x0029f24f, CS:  0x00000008, DS:  0x00000010\
    Error code: 0x00000002\
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)\
    0x5130bb18 : 0x21b837 (0x5dd7fc 0x5130bb4c 0x223ce1 0x0) \
    0x5130bb68 : 0x2abf6a (0x59e3d0 0x29f24f 0xe 0x59e59a) \
    0x5130bc48 : 0x2a1a78 (0x5130bc60 0x0 0x5130bd18 0x29f24f) \
    0x5130bc58 : 0x29f24f (0xe 0x20520048 0x51300010 0x2a0010) \
    0x5130bd18 : 0x57b5748f (0x5d27b1e9 0xec835357 0x5d27b1e9 0xec835357) \
    0x5130bd58 : 0x57b59ef9 (0x588ffd 0x575d27b6 0x57b5eab0 0x53c996) \
    0x5130be18 : 0x543f60 (0x7534e00 0x6e08f00 0x1 0x506b76) \
    0x5130be78 : 0x542137 (0x6e08f00 0x7534e00 0x5e5209 0x1) \
    0x5130bf28 : 0x5426e9 (0x6e08f00 0x752ed80 0x0 0x516766) \
    0x5130bf78 : 0x5443d5 (0x6e08f00 0x0 0x5130bfac 0x1) \
    0x5130bfc8 : 0x2a179c (0x74ff040 0x0 0x2a17ab 0x7313b7c) \
          Kernel Extensions in backtrace (with dependencies):\
             com.metakine.handsoff.driver(1.2.4)@0x57b54000->0x57b62fff\
    BSD process name corresponding to current thread: kernel_task\
    Mac OS version:\
    Not yet set\
    Kernel version:\
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386\Ker

    Hi Hugo, & a warm welcome to the forums!
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons
    It does look like the com.metakine.handsoff.driver, whatever that's about.

  • Macbook Pro issue - advice needed

    Hi!
    I have mid 2010 15” i5 2.53 Macbook Pro that has quite famous Nvidia 330m problem, it works fine when it uses integrated graphics, however it randomly crashes after switching to Nvidia.
    I am a graphic designer so I need to use adobe programs such as Dreamweaver, Illustrator, Photoshop, InDesign, After Effects etc, also I need reliable machine, it’s really annoying when I sometimes lose something I’ve been working for hours after computer crashes (I tend to save everything after each modification but sometimes I won’t be able to when it crashes randomly).
    It worked alright before while using Snow Leopard, issue started after upgrading to Mountain Lion, then, even after downgrading to Snow Leopard, problem stayed. I tried to get apple to fix it free of charge under their policy for this problem last year however they said that macbook showed signs of liquid damage so they wouldn’t, they quoted me for about £670 for total repair - I didn’t agree on this.
    I’ve been looking for some ways to fix it, I upgraded to Mavericks recently and after that macbook was crashing pretty much all the time after few seconds after start up when I was trying to do something on it, when I was using Snow Leopard it tend to crash only 1-4 times a day.
    I’ve found the idea with the blanket forcing it to heat, I have removed battery, plugged AC adapter, positioned turned on mac upside down on the edge of my bed (open lid) covered it with blankets and left it for an hour. To my surprise, after it cooled down it was working much better even tho I was using mavericks, it didn’t crash at all for about 2 hours, then crashed once, then it kept going for even 6 hours without crashing which was really good considering previous situations. The problem is, it still crushes sometimes, and I can’t risk losing my work.
    There are still some ways I haven’t try yet like:
    Putting logic board into the oven for 7 mins
    Trying to heat logic board (Nvidia chipset) with hair dryer
    Also, there is a repair centre on ebay that fixes this exact issue, apparently permanently by fitting brand new updated GPU Chipset that has been purposely produced by Nvidia to replace the Faulty GPU Chipset - this will cost about £180 including return delivery, and they provide 6 months warranty - there was over 100 happy customers with this problem and it seems like they fixed it
    I would prefer to spend as little money as possible, and I have no problem with the speed of my macbook pro, 4gb Ram (currently using 2GB as one stick got broken so it does work slowish, but I will buy another 2gb stick on Monday - or should I get 4gb making overall ram 6gb? will this make much difference?) also, I was thinking about updating HDD to either Crucial 256GB SSD or Seagate Momentus XT 500 and then use my currently installed HDD as external HDD as I have planned to buy external HDD anyway.
    Of course, getting the machine professionally fixed and upgrading it would cost me less than spending loads of money (over £1000) for brand new 13” retina mac, I also like 15” screen, even tho 13” retina has higher resolution, build in DVD is beneficial as well.
    What do you guys think? Any experience with similar problem? If so what was your solution? BTW, what was the highest amount of money you've ever spent to fix your macbook pro that was out of warranty?
    Sorry for quite long post
    Thanks!

    Yes, they specifically fix Nvidia 330m problem, they state that the only true solution is to remove old chipset with their brand new chipset that has been apparently released by Nvidia as an update for this issue, this is exactly what they say:
    What faults can we fix?
    We can fix graphic/display issues relating to the 15" / 17" Nvidia 330M models in 2010 Models. These are fixed using the appropriate professional equipment.
    Brand New Chipset Repair - (only option we recommend for Macbook Pro Nvidia Models) With this procedure we re-fit a Brand New Nvidia GPU Chipset reballed in leaded solder.
    **** Special Offer - £10 off making the Brand New Chipset Repair £169 + Post! ****
    They also provide photos of certain logic board (including photo of serial number) with old chip, chip removed and new chip installed as a proff.
    Thanks!

  • Scanner not saving or mailing correctly after recent OSX update

    I have a photosmart D110a.  Since my last Apple OSX update to 10.9.2, When I scan pics or documents, the scan shows up correctly on the screen, but when I save it or email it, it comes up a black screen.  How do I fix this?

    Welcome to the forums shoppingshauna
    I understand you are having some scanning issues since upgrading to 10.9.2. There is actually no available HP scanning software for the Photosmart D110a on Mavericks. There are however, work around options for scanning.
    I would like for you to click the link and then choose "How do I scan with the driver from Apple Software Update?" and from there you will see your 3 methods for options to scan.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    I hope that helps you scan properly again!
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Very poor 3g & 4g coverage for the last few weeks---why??

    We have had VZW since cell coverage was available in north idaho, specifically zip 83841. Over the last few weeks, AT TIMES we need to go outdoor to talk, otherwise folks can't hear us. Then all of a sudden, we got a full 4 bars on EVDO & 1RX. 15 minutes later it drops to 0 bars on EVDO and 1 or 2 on 1RX. My VZW Hotspot 5510 only has 3 bars of 4g.  For years we have had no problems now it's bad--or even worse than that.
    Can someone point to a site or a phone number I can call to find out what is going on and report this major problem???
    Thanks, Ron

    To check on a service problem contact VZW tech support at 1800-988-0204.  Mention the symptoms as you see them for your devices and ask if there are any issues in your area.
    To better help you analyze the problem try using signal strength numbers like RSSI and perform a site survey of your area.  You can also compare your RSSI numbers with a performance test from http://speedtest.net from your MiFi.  The combined RSSI and stats from speedtest should help them evaluate your area and get a technician to check it out.
    Site Survey:
    http://3gstore.com/page/13_will_an_antenna_help_me.html
    Be prepared to perform a SIM card reset or two while troubleshooting with VZW.  Most of the time when dealing with performance problems a SIM card reset is the first line of defense.  SIM cards are the pieces responsible for communicating with the towers in your area.  Since you have two different devices able to reproduce the problem you should be able to move through the troubleshooting steps quickly. 

  • I have an issue syncing my iPhone 4 with itunes. This has only happened the last few times i have tried but don't know how to resolve it. Please help.

    Hi, the last few times i have tried to sync my iPhone 4 to my itunes it won't work. I plug my phone into my computer, to sync any new pictures i have taken or add my new music i have bought on my phone, and hit sync. It appears to start syncing then an error message appears saying the following:
    The iPhone 'my iPhone' cannot be synced. You do not have enough access privileges for this operation.
    I'm not sure what this means or why this keeps happening. I have the latest iTunes and i have not done anything different. It appears to have wiped some of my music from my iPhone and a number of my photo albums off. Please can someone help or advise how i resolve this issue. Thanks. 

    When you set up iOS7 the second screen specifically asks that you create a four digit code .
    That's what you now need to re-enter in your phone.
    Once entered you can go to system/general/Passcode lock
    Re-enter the same code and choose turn Passcode off
    iOS 7 has been designed to enforce minimum passcode security by default or in the case of the new 5s use of finger print level security.

  • TS3694 Since last few months i am trying to update my ipad from iOS 3.2.2 to 4.1.2 or 5.1, but it always shows error 3002, 3194 etc. I have cheched& resorted to all the given troubleshooting steps , but they didn't help.

    Since last few months i am trying to update my ipad from iOS 3.2.2 to 4.1.2 or 5.1, but it always shows error 3002, 3194 etc. I have checked & resorted to all the given troubleshooting steps , but they didn't help.
    Somebody please help me

    Connect the iPad to iTunes, and do the update with iTunes.
    The 4.1.2 ipsw file will not work, no longer supported.
    The incremental update directly on the iPad does not work either, unless you are already on iOS 5.
    Let iTunes do the job, you already lost too much time by doing it yourself.

  • HELP! Safari 5.1.10 on OSX 10.6.8: All of a sudden in the last few days, when Safari is launched it is trying to load hundreds of pages at the same time, hanging up the whole computer

    HELP! Safari 5.1.10 on OSX 10.6.8: All of a sudden in the last few days, when Safari is launched it is trying to load hundreds of pages at the same time, hanging up the whole computer. What the heck happened?

    I misunderstood the settings. A few days ago I had tried to set it to open a specific page upon launch, and set "New windows open with: Bookmarks" instead of ":Homepage"

  • I have been having 2 MAJOR issues for the last few months:

    I have been having MAJOR issues for the last few months:
    1.) My iTunes keeps shutting down on me, after 5-10 minutes of being opened and starting updates, or if I play music. I restart iTunes and it just does it over and over again.
    2.) I have homesahring ON on both my desktop PC and my AppleTV 2nd gen, but my AppleTV cannot access the computer. I have restarted and reset both PC and AppleTV over and over, but still no luck.
    Any suggestions?

    Welcome to the Apple Community.
    YSUKIC wrote:
    Any suggestions?
    Only that you may wish to resolve issue 1 before looking at #2. The best forum for that would be the iTunes for windows community.

  • HT4623 Over the last few days, I cannot update my apps or connect to iTunes using my iPad.  Can anyone help with this?

    Over the last few days, I cannot load the updates for my iPs apps or download any books via iTunes as it will not allow me to connect to the iTunes store.

    Hi susieq2014,
    When troubleshooting iTunes Store connection issues, the following articles provide the best information:
    First, try signing out of your account in Settings > iTunes & App Store. Once signed out, go ahead and sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    If the above did not resolve your issue, refer to the following:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    - Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
              Note: Time Zone may list another city in your time zone.
    - Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    - Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
              Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    - Make sure that you have an active Internet connection. You can check the user guidefor your device for help with connecting to the Internet.
    - Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    - Try resetting (turning off and then on again) your Wi-Fi router.
    - If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Thanks,
    Matt M.

  • The last few days I have been constantly saving my file. About an hour ago I opened my file and the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the

    The last few days I have been constantly saving my file. A couple of hours ago I renamed the file and then reopened my file a little while later, but the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the fields aren't populated when I open it up. Fyi, I have the free subscription.

    Hi Constance,
    As i understand your changes in the pdf were not saved...Are you still facing this issue?
    Regards,
    Rahul

  • New software update still not downloading.  Apps updates have all downloaded since iTunes issue resolved.  Is the software issue also related to this, or is there another problem?  This is on my iPhone 6, not my Mac.

    Trying to download the iOS 8.2 software update on my iPhone 6, but it won't update.  All app updates have resolved since the iTunes issue was resolved.  Is the software update issue related to this as well, or is it another problem entirely?
    I've synced it to iTunes, turned it off/on, etc., but still not downloading.
    Any help is appreciated.
    Thanks.

    Hi DebC64,
    So is the iOS 8.2 update not downloading to your iPhone, computer or both?
    You have synced it to iTunes, that is an option to update if it's not updating wirelessly.  Please see if other steps help.
    Resolve iOS update and restore errors in iTunes - Apple Support
    Regards,
    Nubz

  • I have tried to rent a movie in iTunes twice in the last few hours, both times it says my session has timed out.  I was browsing to begin with, but then tried closing iTunes

    I have tried to rent a movie in iTunes twice in the last few hours.  First I was browsing then tried to rent and was told my session had timed out.  I closed iTunes and went directly to rent the specific movie and still the same response, session timed out.  I completely logged out of iTunes, tried again 5 hours later, still the same timed out response.  I have successfully rented, downloaded movies and watched them previously.  Any similiar issues for anyone lately? Any ideas why this is happening?

    Try to disable the camera notification: http://support.apple.com/kb/TS1500
    and make sure that Apple Mobile Device Service is active on your computer: http://support.apple.com/kb/TS1567

  • I cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to th

    II cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. Trying to instantiate UID U4691 but lastAllocatedUID is only: 4491 OK"
    I am very frustrated because Muse crashes when cannot download updatres.
    I have been redirected to this forum from the 'Adobe Chat Team'
    I am trying to complete a project for a client, this is the second time I have asked for help. Can anyone please help me I
    I am using Windows 7. I am not sure if a response will come. I am new to forums. Do I wait or will someone contact me?
    Deb Kelleher
    [email protected]

    Hi Deb,
    Please accept my apologies for the inconvenience so far.
    I am not sure if you already tried this, but in case not, try to update Muse via Creative cloud directly.
    Start creative cloud application manager, if you dont have it, you can download it from here,
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Login using your adobe id, once you are in, switch to Apps, and you should see the Update for Muse, click Update.
    Let me know if you get any error or warning.
    Thanks.

  • Itunes locks up my computer every time I try to start it.  This has happened with the last few updates so I have not used it.

    itunes locks up my computer every time I try to start it.  This has happened with the last few updates so I have not used it.

    Hello oldsurfer250,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows issues:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717http://support.apple.com/kb/ts1717
    If iTunes for Windows Vista or Windows 7 won't open, stops responding, or unexpectedly quits, try using the steps below. You may want to print this document before following these steps.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

Maybe you are looking for

  • Set-up Challenge

    Alright, here's the deal. I've got 65GB of music on my internal hard drive in iTunes on my desktop Mac. What I need is an external hard drive that I can backup all my stuff on, but most importantly iTunes. I then need to be able to plug the hard driv

  • Sound recording with duration

    hi all ,     i have some trouble about sound recording function. i want to have 30S duration of sound input recording and also , if the user click the finish button the recording will be stopped even it is still have time for recording. i have tried

  • Spits out DVD-R instead of opening iDVD per system pref

    I have tried DVD-R and DVD+R, 8x and 4x... spits them out after 10 seconds of confused contemplation. Pre-made/homemade CD's and DVD's play fine. When I want to burn a disc with iDVD or burn folders... nada under me user AND test user. Arrrrgh!

  • New-MsolUser : Access Denied. You do not have permissions to call this cmdlet.

    I am trying to create new user in Azure Active Directoy,  New-MsolUser -UserPrincipalName [email protected] -DisplayName "username" -FirstName "fname"  -LastName "lname" I am getting this error, New-MsolUser : Access Denied. You do not have permissio

  • I can not access to the isqlplus from the client

    Version: Oracle 10.1.0.2.0 I have installed Oracle 10.1.0.2.0 on SuSE Linux Enterprise Server 8. I can access to my dbconsole from PC without any issue. I can also access to the isqlus environment from the server without any issue. But I can not acce