Trying to restore 5s from cloud.  Need help!

I started at 8:30.  Everything seemed fine.  Two hours in (is it supposed to take this long?) i started getting random error message popups.  ""verification failed the request timed out" and a similar one saying the "unable to connect to the server."  THEN all of a sudden my wifi disconnected and would NOT reconnect until i did a hard reset of the whole phone.  And it was not a wifi issue as i was using my laptop at the time with no trouble.
Now i have no idea if it is really even restoring or if it is just stuck.  It's now been a bit over 3 hours.  In the iCloud section it still says that it is restoring and will auto backup when it is done, but there is no status bar or anything so how can i be sure.  I am so confused!  Anyone have any advice/suggestions?

You can only restore your app data during a restore, you need to opt to use your back up when prompted in the set up assistant.

Similar Messages

  • I forgot my ipad lock code and when i tried to restore it from yhe itunes it keeps requiring to switch off my ipad finder, i need yo open it whatever is the way

    I forgot my ipad lock code and when i tried to restore it from yhe itunes it keeps requiring to switch off my ipad finder, i need yo open it whatever is the way

    You can turn Find My iPad 'off' by going to http://icloud.com and logging into your account, select the iPad from the device list in the 'Find My iPhone' section on that site, and 'remove from account'

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • HT201263 Unable to update or restore my iPad 2,need help.

    I got ipad2 with 5.1.1 when I tried to update for higher ios directly from my iPad it say "an error occured on installing ios".when I tried to restore/update from pc it gives error 3194,even after changing the host file.i dnt know whats wrong,so plz help me out....thank u..

    Check out: http://support.apple.com/kb/ts3694
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • My iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

    my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

    Hey jestinsinclairr,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694#10
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Have a nice day,
    Mario

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

    I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My ipod touch (2nd generation) is stuck on the usb to itunes screen.  I have NOT jailbroken it, and i have alsop tried restarting numerous times. I need help, soon!

    My ipod touch (2nd generation) is stuck on the usb to itunes screen.  I have NOT jailbroken it, and i have also tried restarting numerous times. I need help, soon! Itunes on my computer works about 50% of the time, so i feel lost!

    Download RecBoot and see if you can kick it out of recovery mode.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • I ve got an iPhone 6 i forgot my password i ve tried to restore it from itunes but in the middle of the downloading it asks for password

    I ve got an iPhone 6 with iOS 8.1.1i forgot my password i ve tried to restore it from itunes but in the middle of the downloading it asks for password  how do i restore my phone?

    Hi there pablo nina,
    Welcome to Apple Support Communities.
    It sounds like you’ve forgot the passcode for your iPhone and you want to know how to restore it. The article linked  below will walk you through the process of restoring your iPhone from recovery mode using iTunes.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Cheers,
    -Jason 

  • I tried to restore backup from itune to my new iphone 5s but have forgotten the password what should I do?

    I tried to restore backup from itune to my new iphone 5s but have forgotten the password what should I do?

    JennyGEL wrote:
    I ... have forgotten the password what should I do?
    Which password?
    If you mean the passcode to your iPhone, here's the solution:
    http://support.apple.com/kb/HT1212
    If you mean the encryption password to your backup on your computer:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.

  • I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas?

    I have unlocked my iPhone 3G with Vodafone via iTunes, but now the downloaded apps crash immediately when opened. I've tried a Restore, but this didn't help. I've also tried removing all apps and re-installing them, but they still don't work. Any ideas? Thanks.

    yep, unfortunately can't reset without the passcode either.
    With regards to doing a restore, do you mean:
    open itunes on my computer
    click on my device on the left
    go to the device summary
    click restore
    it then asks if i want to back up before i restore (to which i say no)
    then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
    then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
    Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

  • Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help.

    Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help. Can someone give me some direction ?

    jpatricio787 wrote: ... is it possible to use it with my white MacBook ?...
    OK so yes, but if, and only if:
    (1) your MacBook has a Firewire port (not all do)
        - and -
    (2) your old external iSight camera works (not all do)
        - and -
    (3) your MacBook is working properly.
    If you are not certain whether your MacBook model has Firewire, you can search MacBook Technical Specifications for your model.  Alternatively, check the  User Guide Manual that came with your MacBook for the information you need to be certain.
    If you are not certain that your old external iSight camera works, you can test it using the suggestions in this link.
    jpatricio787 wrote: ... if so how do I go about it ? ...
    Follow the instructions in your iSight User's Guide to connect and turn on the iSight.  Then launch the Apple app you want to use with your iSight.  If you need more information about using an app, search for "camera" (without the quote marks) in the Help menu choice for the app.
    jpatricio787 wrote:... Can someone give me some direction ?
    If you need more direction, post back the specifics of what you still need.  We will offer further direction based on the details of your reply.
    Message was edited by: EZ Jim
    Mac OSX 10.9.3

  • HT1553 I'm trying to restore data from an external drive to the Macintosh HD that is was originally recovered from. I'm using disk utility and hit a brick wall when I click restore it asks me to scan the Macintosh HD but doesn't let me do this. what do i

    I'm trying to restore data from an external drive to the Macintosh HD from which they were originally recovered. I hit a brick wall where it says I have to scan it first and it doesnt let me.

  • HT201210 I did all these steps and i still cant restore it!! Need Help!!

    I did all these steps and i still cant restore it!! Need Help!!

    Delete and redownload them if doing so is free in your country.
    (83692)

  • TS4020 I have an old loaded itunes account and and a new bare one. Trying to restore backup from my old loaded account with out losing data on device. How do I do it?Would icloud help? and How?

    I have an old loaded itunes account and a bare one.Trying to restore backup to my new iphone 5 from old itunes acoount. Don't want to erase my handset and backup but it's the only option im given. I have about 5GB on this iphone that I don't want lost. How do I retain what's on my iphone and still restore backup to get all my info from the old account?

    Recover media from iPod
    See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
    tt2

Maybe you are looking for

  • Exchange 2013 SP1 and CUCM 9.1.2 - Exch not recognizing called extension

    I think I'm almost there in getting Exchange 2013 SP1 UM working with CUCM 9.1.2...I've got two issues at the moment that I need a little help with. 1) When I dial my VM pilot (6040) from a UM enabled extension it prompts to enter an extension. When

  • Sorting datatable based on column

    Hi, I am new to java studio creator and java. I am trying to sort the datatable based on a column using the methods given in previous posts which uses a button in the column header. I am trying to implement the same method but getting an error when u

  • Moving a PDF from PC to android

    I just downloaded a PDF format book to my computer and I'm wondering if it is possible to now transfer it to my android phone which has Kindle on it so I can read it there? Thank You

  • How to start sql server from cmd

      i am starting sql server from command prompt but i get error message as under : 2014-04-04 23:41:55.90 Server      Error: 17058, Severity: 16, State: 1. 2014-04-04 23:41:55.90 Server      initerrlog: Could not open error log file ''.  Operating sy

  • Publish Services question...

    One thing I'd like to see is the ability to push photos to an online service without the interconnection with LR i.e. I just want to push photos out there and then I want LR3 to forget them. There are a whole host of reasons for doing this including