Trying to Restore Iphone, IOS 6.1.3 update Problems
I am trying to restore my ihpone. The latest software is updated to IOS 6.1.3, I tell itunes to restore my iphone. The restore function then tries to download the latest IOS 6.1.3, eventhough it has already been installed. Then while downloading IOS 6.1.3, although I don't need it, an error pops up and says it timed out.
How to I restore my iphone 4s?
Computer MacBook Pro.
There is nothing that you can do now except to restore the device. The iPad will not work until you restore the iOS. Don't your students backup? I would assume that iPads being used in the classroom would be backed up on a regular basis. If they do backup, you can restore the iOS, then restore from the student backup and either sync his content back to the iPad if you are using iTunes, or download it again in the various purchased tabs of the iStores on the iPad.
Similar Messages
-
HT201210 dose someone has any idea about error 1015 when trying to restore iphone iOS?
Dose someone has any idea about error 1015 when trying to restore iphone iOS?
Error 1015 means the phone was jailbroken. You can not get help here.
-
hi i had a trouble with my iphone 3gs so tried to restore my ios through itunes almost everything was happening at the end of the procedure im getting apopup showing error 29 how to resolve it ?
jk82 wrote:
im getting apopup showing error 29
Try Here > http://support.apple.com/kb/TS3694#hardware -
hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we
mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
TS3694 getting error message 3194 when trying to restore iPhone
Trying to restore iPhone after iOS7 failure and getting 3194 as error message.
Any ideas please?See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore -
TS3694 I am getting 1015 error message when trying to restore iphone 3Gs
I am getting error message when trying to restore iphone 3gs
If this is your phone, it appears that you had either loaded the iOS 7 beta on it and it is now expired or you are not trying to restore the phone correctly. Did you attempt to update using something other than the standard procedure in iTunes? You cannot install a custom iOS file.
-
Error whilst trying to restore iphone 5
iphone error 21 whilst trying to restore iphone a number of times.
HELPHello, _sara.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through for error 21.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm yoursecurity software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Jason H. -
Last night I tried to upload the ios 8.1.3 update to my Iphone 5. There has been a black screen with a blue itunes symbol and plug-in picture for 12 hours now. I've repeatedly tried a reset by pressing and holding the home button and sleep button. Screen goes black, apple symbol appears, same itunes/plug-in picture comes up.
Greetings jacbak79,
Welcome to the Apple Support Communities!
I understand that you attempted to update your iPhone to the latest iOS version and now you see the Connect to iTunes screen on your iPhone. In this situation, it may be necessary to place your iPhone into recovery mode manually and perform the restore and update. To complete this process, please follow the instructions located in the attached article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Joe -
trying to restore iphone 4s to factory settings but is stuck on recovery mode. home button does not work. can anybody help me? i have tried to restoer it several times but it wont work??
try a different cable a different usb port, drop all security software and fire wall, try a different computer here are the steps
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
Trying to restore iphone 4 on Windows 7, 64-bit. It goes so far and then stalls. Have updated itunes, unplugged other USBs. this is my fourth attempt. Any suggestions?
Disable your firewall and antivirus.
-
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
hi every body
trying to restore iPhone 3G 4.2.1 in the same virgin but in the last i get iPhone could not restored .an unknown error occurred (1015)
any body can help me
thanksI would like to know if there is a better to fix this since this iphone has been jailbroken. Google search only shows stuff that talks about installing software that has to do with jailbreaking. I just need to restore back to normal. Thank you!
deggie wrote:
Google "Error 1015 iPhone" and you will find a remedy. -
i want restore iphone ios from 6.1.2 to 6.0.1 , please guide me
@RajaRani: "get home button fix " means. this is a hardware issue..... but one thing i want to ask that when i restore the phone the home button is start working for few minute and the the same problem occur...... i want to restore the ios of the ph is this possible or not.....
-
one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
HT201210 iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
http://support.apple.com/kb/TS3694
Maybe you are looking for
-
Hi All, I have a problem with font while printing , iam not able to get the same font sizein form for a text while printing for example i had given the font size 35 for a text but while giving the printer name in output device LOCL (local printer) i
-
A Free Video Converter For Converting AVIs To Mov
i just got a macbook and im having trouble playing avis in frontrow and i was wondering what converter/codec should i download
-
I need one lens to carry on my 1D during long road rallies with the Corvette Race club. Would the 35-350L be a good canditate? Solved! Go to Solution.
-
Unicode: HEX 20 - how to replace?
Hi there, in an old coding I found the variable that contains a value of type X. The value is '20'. Now I have to converto to unicode and I have to use a CHAR-like variable. How can I change the coding so that I have the same value like Hex20 in the
-
Hi, I had a scenario in which they are using the condition type SKT0 (Discount),they are calculating discount during invoicing but the system is calculating discount as a whole,it is including freight charges also.the customer did n't want to inc