Trying to restore my macbook, and im not the administrator what best way to do.?
im not the administrator of this macbook how can i restore to a factory settings.?
To the best of my knowledge Administartor Privilages are needed to Perform what you ask...
Similar Messages
-
this morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help.
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
TS1456 When it is trying to restore it freezes and does not restore.
When it is trying to restore it freezes and does not restore.
If no error messages
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After updating my iphone 3GS I tried to restore from backup and after choosing the backup and syncing, it keeps coming up with error there wasn't any backup to restore from. Can I get it back or have I lost all my info ?
See if these Articles help resolve your issue,
Troubleshooting Backup Issues
http://support.apple.com/kb/ts2529
http://support.apple.com/kb/HT4946 -
TS3694 I TRIED TO RESTORE MY IPHONE AND ERROR CODE 1015 SHOWS WHAT DO I DO
i tried to restore my iphone 3g but error message 1015 shows up,what do i do
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
TS3694 I am trying to restore my iphone and keep getting the error message 3014?
I am trying to restore my old iphone for my daughter and keep getting error message 3014 - my itunes has the latest version uploaded?
Have you looked here?
-
HT4759 tried to retore my phone and it locked the phon what can i do
my iphone 4s has locked because i tried to restore it what can i do to unlock it
Define Unlock...
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it. -
My phone isn't connecting to iTunes, is downloading inappropriate magazines on its own, and won't let me restore it. What's wrong with it?
What version of OS X are you running? What version of iTunes are you running? And please don't say 'the latest version'... Give us actual version numbers.
-
HELP!
Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.) -
There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
While trying to restore os x and erase content on my MacBook pro, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen with an apple and will not progress. I've waited more than 30 minutes and tried restarting again by holding the power button. Also, restore cd 1 will not eject so the computer will no longer move past the gray screen with spinning circle. Restore CDs had never beeused and were still in packaging in the original box. Ran hardware test just to check, and it came back as normal. Now what? I live nowhere near a genius bar :(
computer asked me to restart and try again by clicking restart button.
That's called a kernel panic...
Since the install disc won't eject, try starting up while holding down the C key. If the Mac won't boot while holding down the C key, try ejecting disc by either holding down the mouse while starting up or holding down the Eject key while starting up.
Try booting from your install disc so you can run Disk Utility in case the startup disk needs repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
What is a kernel panic
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics -
Im trying to restore my ipod and when i click restore a box pops up saying The Ipod software update server could not be contacted what do i do?
Refer to this article:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814 -
iPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?
Try what you have not tried so far. You may have tried all and the Apple store maybe in order.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to restore my ipod, and get a message: "could not restore ipod because it could not be unmounted." What does this mean? And what do I do about it?
It sounds like your PC or Mac's internal HD is full. You need to delete some data or move it to an external hard drive or storage device of some sort before you'll be able to successfully complete the restore.
B-rock -
My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error (code 9). Any help?
Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311
Maybe you are looking for
-
Af:table and selectOneChoice, creating a new row resets selected value
Hello, I have a table containing 4 columns, first two are read-only (outputtext) and next 2 contains selectOneChoice , table model is baed on java.util.List adding a new row, works fine but it resets the selectOneChoice(dropbox) selected value to Fir
-
XML message as input for webservice gives deserialization error
Hi, jDeveloper 10.1.3 BPEL PM 10.1.2.0.2 Carrental example Problem: For the Business Rule Engine I did the Carrental XML example. Based on the java application that connects to the BR engine, I created a webservice in jDeveloper and deployed it to my
-
Doesn't display the path im drawing with the pencil tool
when i select the pencil tool and draw a path it doesn't show it until i release the mouse button! why? how can i fix that? (got the same problem in illustrator)
-
Concatenate field values in a result message
Hi All, I have to insert two fields in a success message as follows: Note num ( note number from the context node ) created succesfully for euipment (equipment number from the context node ). Please tell me how to do this. Thanks & Regards, Srilakshm
-
Syncing after restore, recent backups missing
I had Sprint unlock my phone for international use. I backed up my phone to Gail-PC on Itunes and then reset the iphone 4S. When i went to resync the phone after the reset my computer now says the last time it was backed up was March 2013. I backe